真空阴极弧离子镀类金刚石碳（DLC）膜的碳弧稳定性研究

选用氩气、氩气加氢气、氩气加乙炔等气体作为介质，石墨作为靶材进行真空阴极弧离子镀来制备类金刚石碳膜。石墨电弧有其独特的电弧特性曲线，不同气体介质对碳弧特性的影响不同，磁场的大小对电弧的稳定性有很大作用，碳弧下基片偏流随电弧电压的增加而减小，试验得到表面光滑的类金刚石碳（DLC）膜，对膜的表面进行了SEM分析。     

万顷沙西十三涌油轮码头模型试验研究

华隆公司拟在万顷沙西十二涌与十三涌之间兴十三涌３０００Ｔ级油轮港口码头。本文分析了该河段水文泥沙的特性、河道演变趋势及河段稳定性，通过物理模型试验研究及对航道、港池的回淤计算分析，预测工程建成后引起局部水流流态的变化，对水道泄洪、潮排、潮灌的影响，以及港池、航道建成后的泥沙淤积情况。     

等离子体化学气相法沉积金刚石薄膜

本文介绍和评述了化学气相沉积法制备人造金刚石薄膜及其进展。重点评述了反应机理、发展历史、沉积方法、补底材料、检测手段。论述了有利于形成立方晶系金刚石材料的沉积条件。     

长江上游高洪水期泥沙输移特性

长江上游高洪水期(汛期)泥沙输移特性是决定三峡库区泥沙淤积的关键因素,直接关乎三峡水库使用寿命及综合效益的发挥。借助干、支流长系列水沙资料,分析了长江三峡水库入库寸滩站高洪水期泥沙输移特性,结果表明:近40 a来,寸滩站场次洪水中7 d洪量未出现趋势性变化,而7 d沙量显著减少,高洪水期输沙经历了“涨水输沙占优—涨、落水基本持平—落水输沙占优”的变化过程。2013年以前,寸滩站高洪水期径流及泥沙均主要来自于金沙江,而向家坝、溪洛渡水电站陆续投运后,2013—2019年寸滩站洪水场次(洪峰流量30 000 m³/s以上)共计14场。从径流来源来看,仅4场主要来自于金沙江,其余9场主要来自于嘉陵江,1场来自岷江;从泥沙来源来看,9场主要来自于嘉陵江,其余5场分别来自于沱江、岷江、横江,金沙江已不是寸滩站高洪水期过程中泥沙的主要来源区。研究成果可为三峡水库沙峰排沙调度、库尾减淤调度提供理论支撑,为长江泥沙治理提供保障。     

PREPARATION OF TiN FILMS BY N_2 ASSISTED Xe~+ ION BEAM ENHANCED DEPOSITION AND THEIR MECHANICAL PROPERTIES

A new method for preparation of hard TiN films has been developed by using electronbeam evaporation-deposition of Ti and bombardment with 40 keV Xe~+ ion beam ina N_2 gas environment.The synthesized TiN films were superior to PVD and CVDones in respects of improved adhesion to substrate and low preparing temperature.Theyexhibited good wear resistance and high hardness up to 2200 kg/mm~2.Some industrialapplications have been reported.     

高压粉末制样-X射线荧光光谱法测定海洋沉积物中28种组分

常规粉末压片制样是一种简单、高效的绿色环保制样技术,但是应用于某些沉积物样品制备存在样片表面粗糙和粉末容易脱落的问题。实验采用高于常规的压力进行样品制备,建立了X射线荧光光谱法(XRF)分析海洋沉积物样品中包括硫、氧化钠、氧化镁、三氧化二铝、二氧化硅、五氧化二磷、氧化钾、氧化钙、二氧化钛、氧化锰、三氧化二铁、钴、镍、铜、锌、钒、铬、镓、铌、锆、钇、锶、铷、铅、钡、镧、钕和铪在内的28种主、微量组分的方法。探讨了压力为300 kN和1 600 kN时的制样效果,并尝试引入BP神经网络模型利用其非线性拟合能力校正主量组分的基体效应。结果表明,采用1 600 kN压力制备的样片,表面致密、光滑、不龟裂和不掉粉,制样重复性和测试精密度也有较大提高。以55个有证标准物质中17种组分的数据集为训练样本,建立了海洋沉积物样品中主、微量组分的遗传算法-BP神经网络预测模型。按照实验方法对各组分含量相对较低的实际样品连续测试12次,计算得方法的检出限在 0.63～634 μg/g之间;精密度试验结果表明,各组分测定值的相对标准偏差(RSD, n=7)为0.16%～25.1%。方法用于海洋沉积物实际样品分析,其分析结果与国标法的测定结果吻合,能够满足海洋沉积物样品中多种组分准确分析的要求。     

Thermal stability behaviors of Cr(N,O)/CrN double-layered coatings by TGA/DTA analysis

In this study, Cr(N,O)/CrN double-layered coatings were synthesized using the cathodic arc deposition (CAD) process. CrN film was first deposited onto a substrate as an interlayer to ensure better adhesion, and Cr(N,O) film was subsequently deposited on top of the CrN layer as the surface layer. Variation in the Cr(N,O) coating composition was achieved through changing the O₂/N₂ flow ratio during the last stage of processing. Phase structure, chemical composition, and morphology of the resulting coatings were analyzed and observed using the X-ray diffractometer, Auger electron spectrometer and SEM. In addition, oxidation behavior of the coatings was investigated using TGA/DTA methods. The tests were carried out by increasing temperature up to 1000 °C in ambient air. With the introduction of oxygen gas during the CAD process, a superficial layer was produced in the Cr(N,O) constituent containing CrN and Cr₂O₃ phases. The formation of the oxide phase attributed to the reaction of chromium and oxygen was more favorable than that of chromium and nitrogen. The results also showed that Cr(N,O)/CrN double-layered coatings exhibited superior oxidation resistance at elevated temperature than that of CrN single-layer coated specimen (870 °C vs. 750 °C).     

Effect of laser fluences on the structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation

Carbon nitride films were deposited by direct current plasma assisted pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. The surface morphology, composition and bonding structure of the deposited films were characterized by atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, Raman, and X-ray photoelectron spectroscopy (XPS). The effect of laser fluences in the range 0.5–3 J/cm² on the surface morphology, composition and bonding structure of the carbon nitride films were systematically studied. As laser fluence is increased, AFM results show a great decrease in the surface roughness of carbon nitride films. FTIR and XPS results indicate an increase in the N/C ratio and the content of N atoms bonded to sp³ C, as well as a decrease in the content of H atoms and the content of N atoms boned to sp² C in the deposited films, and Raman spectra indicate an increase in the content of disordered sp² C atoms and the sp² cluster size. The increase in the film density and the decrease in the particle fraction contribute to the decrease of surface roughness with increasing laser fluence.     

Magnetic and mechanical properties of FeSi alloys with high Si content

The chemical vapor（CVD） deposition-diffusion method was applied to prepare FeSi alloys with high silicon content up to 6.5%. In spite of various deposition and post-annealing, the sample remains α-Fe bcc structure. The cross section of the composition was analyzed to evaluate the Si content and distribution before and after annealing. The results show that the soft magnetic properties are improved by increasing the silicon content. For the samples containing about 6.5% Si, the coercivity decreases to 60 from 237.3 A/m of the original. It is also obtained that, in addition to the Si content, Si distribution has a large influence on the core loss due to the effect of resistivity. The micro-hardnesses were also evaluated along the cross-section after various annealings.