羧酸酯稀土对聚氯乙烯的热老化稳定作用研究

用热烘法研究了羧酸酯稀土对聚氯乙烯的热老化稳定作用。利用紫外／可见光谱分析跟踪共轭双键在热老化过程中的变化，比较ＣＥＲＥＳ，有机锡及两者的复合稳定剂的热老化稳定性能，发现ＣＥＲＥＳ与有机锡的稳定性能相当，复合稳定剂具有协同效应。     

长江上游高洪水期泥沙输移特性

长江上游高洪水期(汛期)泥沙输移特性是决定三峡库区泥沙淤积的关键因素,直接关乎三峡水库使用寿命及综合效益的发挥。借助干、支流长系列水沙资料,分析了长江三峡水库入库寸滩站高洪水期泥沙输移特性,结果表明:近40 a来,寸滩站场次洪水中7 d洪量未出现趋势性变化,而7 d沙量显著减少,高洪水期输沙经历了“涨水输沙占优—涨、落水基本持平—落水输沙占优”的变化过程。2013年以前,寸滩站高洪水期径流及泥沙均主要来自于金沙江,而向家坝、溪洛渡水电站陆续投运后,2013—2019年寸滩站洪水场次(洪峰流量30 000 m³/s以上)共计14场。从径流来源来看,仅4场主要来自于金沙江,其余9场主要来自于嘉陵江,1场来自岷江;从泥沙来源来看,9场主要来自于嘉陵江,其余5场分别来自于沱江、岷江、横江,金沙江已不是寸滩站高洪水期过程中泥沙的主要来源区。研究成果可为三峡水库沙峰排沙调度、库尾减淤调度提供理论支撑,为长江泥沙治理提供保障。     

黄河淤积粉土的两种复合稳定方案与性能对比

为探索路基工程中黄河淤积粉土的稳定技术和性能保障方案,针对德州齐河县境内的黄河淤积粉土,在乳化沥青复合稳定粉土(AE稳定土)的研究基础上,采用无机/有机复合材料制备出一种复合固化剂(FG固化剂),研究了AE稳定土和FG稳定土2种稳定方案下粉土的抗压强度性质、水稳定性和抗冻融能力;结合XRD、SEM表征技术,探讨了FG固化剂的稳定机理。研究认为,FG固化剂稳定土较AE稳定土有着更高的无侧限抗压强度、回弹模量和承载能力,水稳定性良好,在抗冻融能力上有着比AE稳定土更好的效果。XRD与SEM分析表明,FG固化剂提供了活性矿物质,其复合胶凝效应和填充增强保障了粉土的抗压强度,高分子物质起到粘结颗粒界面、填塞孔隙的作用,降低了内部孔隙率;两者造成土体的最大干密度变大;与AE稳定土的稳定机理不同。FG固化剂的使用为黄河粉土的稳定和工程应用提供了参考方法。     

On the backstepping design procedure for multiple input nonlinear systems

In a recent paper, we developed a structural decomposition for multiple input multiple output nonlinear systems that are affine in control but otherwise general. In this paper, we exploit the structural properties of such a decomposition in the application of the backstepping design technique on multiple input nonlinear systems. In particular, this decomposition simplifies the conventional backstepping design and motivates new backstepping design procedures that are able to stabilize systems on which the conventional backstepping procedure is not applicable. Copyright © 2011 John Wiley & Sons, Ltd.     

Robust stability and stabilization of discrete singular systems with interval time-varying delay and linear fractional uncertainty

The robust stability and robust stabilization problems for discrete singular systems with interval time-varying delay and linear fractional uncertainty are discussed. A new delay-dependent criterion is established for the nominal discrete singular delay systems to be regular, causal and stable by employing the linear matrix inequality (LMI) approach. It is shown that the newly proposed criterion can provide less conservative results than some existing ones. Then, with this criterion, the problems of robust stability and robust stabilization for uncertain discrete singular delay systems are solved, and the delay-dependent LMI conditions are obtained. Finally, numerical examples are given to illustrate the e?ectiveness of the proposed approach.     

Stabilization of impulsive hybrid systems using quantized input and output feedback

In this paper, we consider the feedback stabilization of impulsive control systems with quantized input and output signals. To study the problem, the notions of quasi‐invariant sets and attracting sets for impulsive systems with quantization are introduced first, and then applied to the control design. Hybrid quantized control schemes are proposed to stabilize the considered impulsive linear or nonlinear systems via either input or output feedback. Mathematical analysis and numerical simulations are given to show the principle and effectiveness of the proposed designs. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Exponential stabilization of uncertain time‐delay linear systems with Markovian jumping parameters

This paper studies the exponential stabilization problem of uncertain time‐delay linear systems with Markovian jumping parameters. A novel delay decomposition approach is developed to derive delay‐dependent conditions under which the closed‐loop control system is mean square exponentially stable for all admissible uncertainties. It is shown that the feedback gain matrices and the decay rate can be obtained by solving coupled linear matrix inequalities. Moreover, the difficulties arising from searching for tuning parameters in the existing methods are overcome. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Multiple Na,K-ATPase Subunits Colocalize in the Brush Border of Mouse Choroid Plexus Epithelial Cells

(1) Background: The unusual accumulation of Na,K-ATPase complexes in the brush border membrane of choroid plexus epithelial cells have intrigued researchers for decades. However, the full range of the expressed Na,K-ATPase subunits and their relation to the microvillus cytoskeleton remains unknown. (2) Methods: RT-PCR analysis, co-immunoprecipitation, native PAGE, mass spectrometry, and differential centrifugation were combined with high-resolution immunofluorescence histochemistry, proximity ligase assays, and stimulated emission depletion (STED) microscopy on mouse choroid plexus cells or tissues in order to resolve these issues. (3) Results: The choroid plexus epithelium expresses Na,K-ATPase subunits α1, α2, β1, β2, β3, and phospholemman. The α1, α2, β1, and β2, subunits are all localized to the brush border membrane, where they appear to form a complex. The ATPase complexes may stabilize in the brush border membrane via anchoring to microvillar actin indirectly through ankyrin-3 or directly via other co-precipitated proteins. Aquaporin 1 (AQP1) may form part of the proposed multi-protein complexes in contrast to another membrane protein, the Na-K-2Cl cotransporter 1 (NKCC1). NKCC1 expression seems necessary for full brush border membrane accumulation of the Na,K-ATPase in the choroid plexus. (4) Conclusion: A multitude of Na,K-ATPase subunits form molecular complexes in the choroid plexus brush border, which may bind to the cytoskeleton by various alternative actin binding proteins.     

Myopathy-Sensitive G-Actin Segment 227-235 Is Involved in Salt-Induced Stabilization of Contacts within the Actin Filament

Formation of stable actin filaments, critically important for actin functions, is determined by the ionic strength of the solution. However, not much is known about the elements of the actin fold involved in ionic-strength-dependent filament stabilization. In this work, F-actin was destabilized by Cu²⁺ binding to Cys374, and the effects of solvent conditions on the dynamic properties of F-actin were correlated with the involvement of Segment 227-235 in filament stabilization. The results of our work show that the presence of Mg²⁺ at the high-affinity cation binding site of Cu-modified actin polymerized with MgCl₂ strongly enhances the rate of filament subunit exchange and promotes the filament instability. In the presence of 0.1 M KCl, the filament subunit exchange was 2–3-fold lower than that in the MgCl₂-polymerized F-actin. This effect correlates with the reduced accessibility of the D-loop and Segment 227-235 on opposite filament strands, consistent with an ionic-strength-dependent conformational change that modulates involvement of Segment 227-235 in stabilization of the intermonomer interface. KCl may restrict the mobility of the α-helix encompassing part of Segment 227-235 and/or be bound to Asp236 at the boundary of Segment 227-235. These results provide experimental evidence for the involvement of Segment 227-235 in salt-induced stabilization of contacts within the actin filament and suggest that they can be weakened by mutations characteristic of actin-associated myopathies.