27keV Ar~+斜入射时的Cu-Au合金溅射实验角分布

用27keV Ar~+分别在垂直和倾斜入射情况下,轰击了Cu-Au(30wt％)合金样品,测量了Cu和Au原子的溅射角分布。角分布是用卢瑟福背散射(RBS)技术分析Al捕获膜上的Cu-Au沉积成分而定量得到的。结果表明:(1)在Ar~+倾斜(θ=40°)入射时,Cu原子择优发射,且程度比垂直入射(θ_r=O°)时增强:(2)倾斜入射时,Cu原子的角分布显示出在接近于样品表面法线方向的发射角范围内(θ<45°),发射机率比垂直入射时减小。     

坑道用水下堵漏剂的研制

坑道水下堵漏剂的研制包括F－1、F－2和F－3型。其中F－1是一种有机堵漏剂，它可以在水中固化；F－2是一种无机防水堵漏剂，施工方便；F－3是速凝型，它可在瞬间固化，能对坑道的涌水口进行堵漏。     

刚性圆板自由落体在水面上的冲击压力

本文对一个刚性圆板自由落体在水面上的冲击过程建立了比较精确的理论模型,并建立了相应的数值格式。计算结果与已有的实验结果符合良好,通过计算进一步给出了下落质量和下落高度对冲击压力峰值的影响。     

NETWORK6000在脱离子水处理过程中的应用

脱离子水处理单元是一种顺序控制单元，对时序控制有严格的要求。文中介绍了一种新型的控制系统NETWORK6000在PTA装置脱离子水单元中的应用状况，为中小规模的装置应用提供了一种较典型的思路和借鉴，最后对系统的应用状况进行了评价。     

Zeolite synthesis from paper sludge ash with addition of diatomite

BACKGROUND: This study aimed to investigate the synthesis of zeolites from paper sludge ash (PSA) with added diatomite to remove both NH₄⁺ and PO₄^3? for water purification. The PSA had low Si and significant Ca contents. Four types of diatomite: white (T‐W) and brown (T‐B) from deposits of marine origin in Takanosu, and white (S‐W) and gray (S‐G) from lacustrine deposits in Shonai, were added to NaOH solution to increase the Si content and thereby synthesize zeolites with high cation exchange capacity (CEC). RESULTS: The order of the amounts of Si extracted from the diatomite to the alkali solution was S‐W > T‐W = T‐B > S‐G, which correlates with the amorphous SiO₂ content of diatomite. The original ash without addition of diatomite yielded hydroxysodalite with CEC of about 1.0 mmol g^?1. For all samples, the addition of diatomite to the solution yielded zeolite‐P with a higher CEC, but the addition of excess Si inhibited the synthesis of zeolite‐P, and the CEC of the product was low. A product with high CEC including zeolite‐P was obtained in a solution with around 500 mmol L^?1 of Si concentration, and had the ability to remove both NH₄⁺ and PO₄^3?. CONCLUSION: Diatomite has the potential for used as an additive for the synthesis of high CEC zeolite from PSA. The product with zeolite‐P exhibited relatively high CEC, capacity for NH₄⁺ uptake, and the ability to remove PO₄^3? by precipitation, which is preferable for water purification applications. Copyright © 2008 Society of Chemical Industry     

轧后穿水冷却工艺对棒材组织性能的影响

针对轧机产量提高后冷床冷却能力不足的问题 ,研制开发了棒材轧后穿水冷却技术。通过对小规格 2 0MnSiV热轧带肋钢筋进行轧后穿水冷却 ,钢材上冷床温度降低了 90～ 110℃ ,提高了产品质量 ,改善了各项力学性能 ,抗拉强度平均提高了 3 5～ 40MPa ,钢材性能合格率由 97.5 %提高到了 99.6% ,解决了冷床冷却能力不足、制约生产的瓶颈问题。     

GPS在水面流速流向测量中的应用

传统的水面流速流向测量多采用经纬仪交会法,此法需要大量的人力和设备,工作量大且费时。近几年,随着全球定位系统(GPS)的广泛应用和实践,在一定范围内,采用GPS定位法替代经纬仪交会法施测水面流速流向。介绍了GPS定位法的测量原理、设备,以及测量方法。通过对GPS定位法的精度和优缺点的分析,得出采用GPS定位法施测水面流速流向具有较高的推广价值。     

水上地震折射互换法误差分析

在理论上，用源检互换的方法进行折射地震勘探是没有误差的，在某些特殊条件下无法铺设检波器而又必须进行折射地震勘探时它也是唯一的选择，然而，在实际工作中，由于各种因素的影响，其误差是不可忽略的。为此，本文从地震折射运动学的角度对水上地震折射互换法因过河钢丝绳的重量、水的流速和流向、炮点深度等客观因素造成的解释误差进行了分析，揭示了水上地震折射互换法应注意的问题。这对水上地震折射互换法的资料解释进行误差校正提供了理论基础。     

Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008