Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

5%Si高硅奥氏体不锈钢元素偏析及均匀化处理

 高硅奥氏体不锈钢由于高含量硅元素的加入使其具有优异的耐高温腐蚀性能和较低的成本,在制酸行业有着潜在的应用价值。然而,该合金中高含量硅元素的加入会促进凝固过程中溶质再分配,进而造成显著的元素偏析,最终导致合金内部产生枝晶组织和大量的有害相。对铸锭组织进行均匀化处理能够有效消除枝晶与元素偏析,促进析出相回溶和枝晶消融,从而改善材料的热塑性,有效应对热变形开裂问题。因此,采用金相显微镜(OM)、扫描电镜能谱分析(SEM/EDS)、电子探针(EPMA)、JMatPro软件计算等方法,研究了实验室条件下制备的5%Si高硅奥氏体不锈钢铸锭的显微组织和元素分布状态,通过残余偏析指数、扩散动力学计算并结合均匀化处理试验验证,最终确定了5%Si高硅奥氏体不锈钢合理的均匀化处理工艺。结果表明,5%Si高硅奥氏体不锈钢凝固过程中钼元素偏析最为严重,通过残余偏析指数模型计算得到的均匀化动力学方程可用来指导该成分合金的均匀化处理工艺;5%Si高硅奥氏体不锈钢经过1 150 ℃×12 h均匀化处理后,铸锭内枝晶消融,元素偏析基本消除,析出相与铁素体回溶到基体中,合金转变为全奥氏体组织,热塑性得到改善;当加热温度达到1 250 ℃时,合金出现过烧现象,晶界开始熔化。     

Diffusion bonding between nickel-base superalloy K24 and heat-resisting steel 1Cr11Ni2W2MoV

IntroductionSLlperalloyandheat-resistingsteelarenowwidelyusedasstructurematerialsinaerospace,a\-lationalldshipbuildingindustries.Nickel-basesuperalloywasfirstlyrevealedasanengineeringmaterialduringtheearly1960swhenitwasrecognizedasbeingsuitableforllledium-temperaturegasturbinel'l.Now.nickel-basesuperalloyhasbeenpracticallyusedinhigheffectiveturbinestosatisfytheincreasingdemandsforhighertemperatureenvironmentsIZI.Insomeaerospaceengines,theimpellersshouldserveattemperatureof1000C~1100C,andala…     

硫酸装置布朗扩散型纤维除雾器的现场测试

开发了一种用于布朗扩散型纤维除雾器的便携式现场测试装置，用这套装置可在现场测定纤维床阻力，从而对元件制造水平进行评价和比较，或在维修期间预测清洗后元件的操作性能。介绍便携式现场测试装置的设备布局、安装和运行，并对整体充填、平行缠绕、斜交叉缠绕纤维床及同心组合纤维床进行比较。此外，论述了硫酸装置工艺气体压降的价值。     

Stochastic defect diffusion model for relaxation effects in crystalline polyethylene

It is suggested that some relaxation processes observed in crystalline polyethylene are consequences of the diffusive motion of a particular defect called a point dislocation or twist dispiration loop along the polyethylene stems in lamellar crystals. The motion of the defect, characterized by a diffusion coefficient and a mobility, is described by solutions of the Smoluchowski diffusion equation with boundary conditions that constrain the defect to move along routes that produce experimentally observable results. The fact that passage of the defect causes both a 180° rotation of the chain and moves an extra CH₂ group in the direction of the chain axis is important to the interpretation of the data according to this model. The diffusion coefficient for a defect is estimated to be around 2 × 10^?9 cm² s^?1 at 70°C. This value is shown to be reasonable both from the viewpoint of detailed computer modelling of defect motion and contemporary ideas about scaling.     

User experience and personal innovativeness: An empirical study on the Enterprise Resource Planning systems

Although user experience and personal innovativeness are two important factors in new technology adoption, there has been no prior study to test these factors with the Enterprise Resource Planning (ERP) adoption. This paper investigates moderating roles of user experience on the relationship between the personal innovativeness and the ERP adoption motivations. This issue is important because if the user has more experience with the systems then the power of influence of personal innovativeness on ERP adoption motivation would be different. Thus, this paper tests these important insights of ERP systems adoption with the two different field samples with high (more than three years) and low (less than three years) user experience, based on the innovation diffusion theory, self determination theory, and different types of motivations such as intrinsic and extrinsic motivations. The findings, based on the PLS analysis of the model using 107 ERP end users, show that there are clear moderating effects of user experience—such as impacts of personal innovativeness on ERP systems adoption motivations are higher in case of low user experience samples, as expected. Academic and practical implications are discussed in the paper based on these empirical findings.     

Fat-simulating and accelerating solvents for polyolefins and MWD of solvent extracts of polyethylenes

Migration kinetics of straight-chain oligomers and antioxidants from several polyolefins at different temperatures into various solvents have been studied by radioactive tracer techniques. Anhydrous ethanol appears to be a well suited food-oil or liquid-fat simulant for extracting different types of migrants from polyolefins. Pure and mixed triglycerides are also good oil or fat simulants, but the triglycerides offer no simpler analytical procedures than the use of oil or fat themselves. n-Octanol may also be considered as a reasonable oil or fat simulant; however, its action depends somewhat on the choice of migrants. The accelerating action of n-heptane over that of oil or simulants is quantitatively demonstrated. The accelerating effects are greater for migration systems with lower diffusion coefficients. The diffusion coefficients for migration into n-heptane are about 20 times greater than the diffusion coefficients into ethanol or oil for otherwise identical migration systems yielding diffusion coefficients of about 10^?7 cm²s^?1 into oil or ethanol. For systems yielding diffusion coefficients into oil or ethanol of about 10^?12 cm²s^?1, the corresponding diffusion coefficients into n-heptane are about 1000 times greater. The molecular weight distributions (MWDs) of the n-heptane and ethanol extracts of polyolefins have been analysed. n-Heptane can not only accelerate the migration of the individual migrant but also remove oligomer species that are slightly soluble or present at low levels in the oil or simulant extracts.     

Modeling solute diffusion in aqueous polymer solutions

There are numerous models describing solute diffusion in polymer solutions. An analysis of these models demonstrates that none can provide a consistent explanation of the phenomenon observed for solutes that can be modeled as essentially solid spheres. For this reason, a new model based on a physical obstruction approach is presented. In this model, solute movement in the presence of polymer chains is assumed to be governed by the probability of the solute molecule encountering a series of openings between the chains larger than its hydrodynamic radius. The model is tested against data taken from the literature for a series of polymer solutions and solute probes and found to provide good agreement to the effects of solute size, polymer concentration, and polymer flexibility.     

基于扩散距离和MDS的非刚性模型相似性分析

在非刚性模型相似性分析方法中, 基于测地距离的等距嵌入方法对模型拓扑变化非常敏感, 对于有局部拓扑变化的完全相似的模型也无法得到正确结果。为了弥补这一不足, 提高非刚性模型相似性分析的准确性, 将扩散距离与多维尺度分析(MDS)相结合, 计算非刚性模型的等距嵌入模型, 再利用迭代最近点(ICP)算法通过计算嵌入模型的相似性来实现原始非刚性模型的相似性分析。实例证明该方法对含有拓扑变化的非刚性模型可以得到理想的相似性分析结果。