内蒙某铅锌矿选矿工艺研究

该矿是铜、铅、锌等多种金属可供综合利用的多金属矿床。铜、铅分离的工艺流程研究是十分重要的。也是设计中的重点和难点。     

排气结构对导叶式旋风管分离性能的影响

通过对比实验测定了不同排气结构下导叶式旋风管的分离效率及压降,同时用智能型五孔球探针测试仪测定了不同排气结构的旋风管内流场分布,结合性能实验与流场测量的结果,研究了排气芯管内径及其结构型式对分离性能的影响,为旋风管结构优化和开发及其分离机理的研究提供了一定的实验基础。     

透平膨胀机转速波动异常分析及处理

介绍了透平膨胀机转速表显示转速大幅度波动的情况,分析了原因并提出了处理方案。     

漫谈钢铁企业用空分装置的流程选择

钢铁企业的氧气厂要深入了解本企业的用氧情况及周边市场的需要，据此确定拟新增空分装置的设计参数，选定最适宜的空分流程。探讨了空分流程选择时要考虑的几个方面。介绍了一种对空分装置的投资和长期运行费用之间进行经济性分析的定量计算公式，并得出了四点结论。     

膜分离法回收合成氨弛放气中氢气

介绍了膜分离的原理和应用。实践表明该方法具有效率高、流程简单、操作灵活容易、纯度高和收率高等优点。     

硫酸铵-氯化亚锡-孔雀绿体系浮选分离铂

研究了在盐酸介质中硫酸铵存在下氯化亚锡—孔雀绿—水体系浮选分离铂的方法。在最佳实验条件下，铂的浮选率可达100．0％，并与常见贱金属完全分离。     

电分标准工作曲线的推导与实践研究

本文根据人眼视觉特性、孟塞尔方程及彩色复制理论,并结合实际工艺路线和工艺条件,推导出标准阶调复制曲线和标准电分工作曲线。它与德国Hell公司所绘的电分标准工作曲线基本一致。并做到了各工序有数据,有质量标准,使平印制版做到有规可循。     

循环流液相等电聚焦方法及应用研究

利用循环流液相等电聚焦技术，对Ｈｂ、Ｃｙｔ．Ｃ和ＢＳＡ混合物进行分离，对ＲＮａｓｅＡ粗制品进行精制。该方法上样量大，活性回收好。对聚焦过程中扩散、对流和电渗的影响进行了讨论。     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.