核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.     

地层测试对油层改造选井选层的重要性及改造措施有效性评价

经对胜利油田近三年来典型井例测试资料分析评价及其增产措施效果分析认为，有三类地层压裂增油效果很好：地层物性相对较好的常压系统且存在严重堵塞的储层；物性较好的常压地层；高压低渗透储层。有两类地层酸化效果很好：灰岩、白云岩裂缝、低产低渗透储层；物性较好且存在严重污染堵塞的储层。其它地层压裂、酸化一般是无效的。     

中原油田气井堵水工艺技术探讨

针对中原油田气田的开发现状,为寻求更加经济、有效的治水措施,通过对国内外气田开发状况的调研,对找水技术和堵水技术进行了归纳,在此基础上研究出适合于中原油田气井堵水的GWPA堵剂系列,现场应用效果较好。     

地面遥控可调弯接头的设计

钻进过程中,为实现定向控制目标,发明了地面遥控可调弯接头,它通过改变钻井液排量来使上、下花键轴在花键筒内上下滑动,由于各花键齿端部形状的特点,这一滑动会导致上、下花键筒之间发生转动,又由于上、下花键筒的转动轴线与它们的外表面不平行,就会使它们之间出现需要的各种弯角,从而在地面就能改变井下弯接头的结构弯角,满足定向控制技术的需要。整个调节过程花费时间很少,因此可节约钻井成本。     

东海西湖凹陷探井钻井完井液技术

介绍了东海西湖凹陷的储层特征。在分析探井储层损害原因的基础上，提出了优化的海水钻井完井液体系。两口井应用表明，储层保护效果明显。     

二流量试井工艺及资料解释分析方法

描述了二流量试井工艺的实现，从常规分析和双对数曲线拟合两上方面，给出了二流量试井的资料解释分析方法，分析认为二流量试井同样可以计算出正常关井测压力恢复（或压力降落）资料所解释的油藏及流体参数。这种试井方法不但可以减少因正常关井测压对产油量和注水量的影响，而且可以减缓因突然关、开井造成的套管变形或损坏。实践证明，该试井技术方法具有较好的经济效益和应用前景。     

利用控制头酸化测试联作的新方法

采用采油树进行酸化作业，安全可靠，但在原钻机试油过程中，采用采油树酸化作业工作量大而繁重，存在一些不便之处。利用控制头替代采油树酸化作业，可以解决困扰酸化施工时来回倒换井口的难题，并且可以缩短试油周期，减少管柱起下钻次数，为含硫化氢油气井的施工提供了安全保障。1997年以来，在塔中26井、塔中126井利用控制头实施酸化作业并获得成功，为酸化测试联作及超深高含硫井的施工积累了实际经验。     

永久式防倒灌隔水采油工艺在长庆油田的应用

长庆油田存在严重的套管腐蚀损坏,采取的主要治理措施是隔水采油工艺技术。原有隔水采油工艺存在隔采周期短、检泵时水层倒灌污染油层、多次隔采后坐封难度大等问题,为此,试验应用了永久式防倒灌隔水采油工艺。现场试验、应用表明,该工艺具有隔采成功率高、隔采周期长等优点,能有效防止检泵时上部水层倒灌污染油层,具有很好的应用价值和推广前景。     

临盘油田分层注水管柱有效率影响因素分析

分层注水管柱有效率低一直是困扰临盘油田开发生产的一大难题。针对这一现状，在分析油藏结构、施工工艺和现场资料的基础上，分析了影响分层注水井管柱有效率的因素，阐述了封隔器、工艺操作、管枉自身及温度等制约分层注水管柱有效率提高的原因，并提出了相应的对策和措施。     

GEOLOGICAL MODEL EVALUATION THROUGH WELL TEST SIMULATION: A CASE STUDY FROM THE WYTCH FARM OILFIELD, SOUTHERN ENGLAND

This paper presents an approach to the evaluation of reservoir models using transient pressure data. Braided fluvial sandstones exposed in cliffs in SW England were studied as the surface equivalent of the Triassic Sherwood Sandstone, a reservoir unit at the nearby Wytch Farm oilfield. Three reservoir models were built; each used a different modelling approach ranging in complexity from stochastic pixel‐based modelling using commercially available software, to a spreadsheet random number generator. In order to test these models, numerical well test simulations were conducted using sector models extracted from the geological models constructed. The simulation results were then evaluated against the actual well test data in order to find the model which best represented the field geology. Two wells at Wytch Farm field were studied. The results suggested that for one of the sampled wells, the model built using the spreadsheet random number generator gave the best match to the well test data. In the well, the permeability from the test interpretation matched the geometric average permeability. This average is the “correct” upscaled permeability for a random system, and this was consistent with the random nature of the geological model. For the second well investigated, a more complex “channel object” model appeared to fit the dynamic data better. All the models were built with stationary properties. However, the well test data suggested that some parts of the field have different statistical properties and hence show non‐stationarity. These differences would have to be built into the model representing the local geology. This study presents a workflow that is not yet considered standard in the oil industry, and the use of dynamic data to evaluate geological models requires further development. The study highlights the fact that the comparison or matching of results from reservoir models and well‐test analyses is not always straightforward in that different models may match different wells. The study emphasises the need for integrated analyses of geological and engineering data. The methods and procedures presented are intended to form a feedback loop which can be used to evaluate the representivity of a geological model.