Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

天然调味料──酵母抽提物的研究进展

着重论述了酵母抽提物的特性、在食品中的应用前景、制造方法、工业化生产中存在的问题及其解决方法，并对酵母抽提物的发展方向作一展望。     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

PVInSb红外探测器的阻抗——频率特性分析

通过理论计算和实际测试，给出了ＰＶＩｎＳｂ红外探测器的低频阻抗－频率特性曲线，结合检测阻抗／动态电阻的方法和阻抗－频率特性曲线的变化规律，分析讨论了ＰＶＩｎＳｂ红外探测器的阻抗与动态电阻的异同，从而说明在涉及ＰＶＩｎＳｂ红外探测器的阻抗／动态电阻时，即使在低频范围也要具体考虑频率因素的影响。     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

澳大利亚进口焦煤煤质特性与结焦特性研究

通过质量检测、煤的岩相分析和20kg试验焦炉炼焦试验，对澳大利亚两种进口焦煤诺维茨煤和峰景煤的煤质和结焦特性进行了研究，两种进口焦煤低灰、低硫，为单一煤层煤，煤质稳定，配煤炼焦有利于焦炭质量稳定。峰景煤和国内柳湾煤的结焦性能相当，诺维茨煤的结焦性能与国内恒山煤和祁县煤的结焦性能接近。     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．     

Electric and dielectric properties of solution-gas interface-grown PbS films

Dielectric properties andI–V characteristics of solution-gas interface-formed PbS thin-film capacitors (Al/PbS/Al) of various thicknesses have been studied in the frequency range 10-10⁶ Hz at various temperatures (300–443 K). Current-voltage (I–V) characteristics show space-charge-limited conduction. Dielectric constant (ε) increases with increasing film thickness and temperature and decreases with increase of frequency. The loss factor (tanδ) peaks observed in tanδ vs frequency and tanδ vs temperature reveal relaxation effect from dipolar orientation. These maxima shift to higher-temperature region with increasing frequency. The large increase in capacitance (C) and dielectric constant (ε) towards low-frequency (f) region indicates the possibility of an interfacial polarization mechanism in this region.