变形温度和变形程度对Ti－31合金性能和组织的影响

通过高温和室温拉伸试验，研究了变形温度和变形程度对Ｔｉ－３１合金板材性能和组织的影响。结果表明，合金在７５０～８５０℃的温度下变形５％～２０％空冷后，其室温机械性能均能达到材料的技术指标要求。并发现了材料在９００℃的临界变形区。     

汛期采金船的缆绳牵拉

本文介绍了采金船渡汛时的停泊方向及采金船在洪水中可能产生拖曳力的估算方法，为了防止采金船汛期发生溜船事故，建议采用缆绳牵拉固船的措施，以保障采金船的汛期安全。     

对遂昌金矿采场结构参数的探讨

对于遂昌金矿合理的采场结构参数，目前没有理想的确定方法。本文联系上盘围岩的构造裂隙，矿房的支护形式等提出采场稳定跨度判断指标。经４０个采场的检验，值信度达９７．５％。     

Predicting the shape of organic crystals grown from polar solvents

A method for predicting the shape of organic crystals grown from polar solvents is presented. The model is an improvement of the recent method developed by Winn and Doherty (A.I.Ch.E. Journal 44 (1998) 2501) for predicting the shape of organic crystals grown from solvents in which the energy of adhesion at the interfaces is dominated by dispersive forces (e.g., non-polar solvents). The principal characteristic of the new method is that it can account for the role of hydrogen donor and hydrogen acceptor atoms in forming strong bonds at the interface. This technique is a first step towards predicting the shapes of organic crystals grown from polar solvents, and has been applied successfully to predict the shape of adipic acid grown from water, and succinic acid grown from water and from propanol.     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

低电阻率气层测井评价方法

粘土矿物成份是造成气层电阻率低的主要原因。用灰色静态模型计算孔隙度，用BP神经网络计算束缚水饱和度等参数。与岩心分析结果比较，储层参数计算结果精度有所提高。用储层参数建立气层和水层的判别式，判别结果与试油有较好的一致性。综合数字处理结果建立了气层产能评价模型，处理结果与试油结果比较，符合率82％。     

Suitable test structures for submicron ion beam analysis

For the precise determination of the sizes of submicron beam spots test structures with an excellent edge definition are required. For this purpose a semiconductor heterostructure consisting of an 1.62 μm GaInP epi-layer grown on (0 0 1) GaAs has been made, which provides atomically sharp edges for beam spot size measurements. Since the sample has been thinned down by standard transmission electron microscope (TEM) preparation techniques, it can be used for both PIXE and STIM. The sample has been investigated with a TEM and the ion nanoprobe LIPSION. A one-dimensional beam profile in the low current mode was determined by a STIM measurement using 2 MeV protons and yielded a FWHM of (41±4) nm, which is the smallest value reported so far for high energy nuclear micro- and nanoprobes. Furthermore we present nickel nanowhiskers produced at the GSI Darmstadt by electrochemical preparation of etched ion track membranes that have been used to obtain two-dimensional images of the shapes of submicron beam spots. For these measurements a scan over a single nickel nanowhisker having a diameter of 220 nm and a height of about 6 μm was performed.     

汽油辛烷值智能调合系统

采取一种能够在线学习、不断提高、建立一系列模型的策略，提出了一种具有学习功能的汽油辛烷值智能调合系统。该系统可以根据成品汽油辛烷值指标、生产成本和市场价格等因素提供一个较好的油品调合调度方案。实际应用结果表明，利用参数学习的方法计算调合汽油辛烷值是可行的。     

大孔距小排距的孔网参数在中深孔爆破中的应用

天铁集团的石矿厂多年来爆破效果不理想，粉矿率高，通过对爆破孔网参数的优化，采用大孔距、小排距的孔网参数在中深孔爆破中取得了较好的效果。     

孔板—均速管组合法测量汽—水两相流双参数

利用孔板与均速管组合在线测量汽—水两相流双参数，解决了稠油热采中同时测量蒸汽流量与干度的难题。其工作程序用Mcs-51单片机汇编语言编制而成，主程序由初始化、数据采集处理，热物理参数生成、汽—水两相流量、干度、质量流量、热量计算以及累计运算等模块组成。通过在现场进行标定；干度用化验CI^-法进行标定，流量用锅炉入口的涡轮流量计标定。经胜利和新疆两油田进行的大量试验可知，该仪表测量水蒸汽流量和干度其均方差皆小于7%，满足了工业应用要求。