基于TL矩法的洪水频率分布参数估计方法优选

为分析TL矩法在洪水频率分析中的普适性,以陕北地区神木、绥德、杏河、刘家河、黄陵和志丹6个水文站的年最大洪峰流量序列为例,选取广义Pareto分布、广义极值分布和广义Logistic分布,对线性矩法、极大似然法与TL矩法3种参数估计方法进行拟合优度评估。结果表明:除杏河站用广义极值分布外,其他5个水文站的年最大洪峰流量序列用广义Pareto分布拟合效果更佳;与线性矩法和极大似然法相比,TL矩法在各水文站均表现出更佳的拟合效果,是一种洪水频率分布参数估计的较好方法。     

基于互补原理确定黄土高原Budyko方程的流域特性参数

Budyko方程的流域特性参数一般根据植被覆盖度等下垫面特征进行确定,但相关资料不易获取。本文针对黄土高原地区29个小流域,通过分析流域特性参数、植被覆盖度和互补关系中大气湿润指数之间的关系发现,大气湿润指数能够间接反映植被覆盖度的大小,进而能够利用常规气象数据确定流域特性参数,并拟合出了经验公式。相比采用固定流域特性参数,这种方法能够提高Budyko方程对实际蒸散发量的模拟效果。相比于植被覆盖度等下垫面资料,常规气象数据时间序列长、且更易获取,因此本方法具有较好的应用前景。     

Parametric 3D modeling of young women's lower bodies based on shape classification

Three-dimensional (3D) human body modeling is an important research direction in the field of clothing virtual design. On the basis of 3D human body scanning, this paper studied a method to build a 3D parametric lower body model according to body classification. The research includes three main parts. (1) Anthropometry and body shape classification. We randomly selected 333 young women ages 18–25 years old in Northeast China as the experimental sample. Then we divided the lower body shape into three categories using principal component analysis and K-means clustering. (2) Determination of feature cross sections and points, and reconstruction of feature curves. According to the average values of each body type, we obtained the mean reference body by Euclidean distance method. We determined feature cross sections and points, and extracted the 3D coordinates of the feature points of the mean reference body to reconstruct the feature curves. (3) The surface lofting and establishment of parametric 3D lower body model. According to the shape characteristics of the lower body, we constructed the guiding lines for the crotch and lower limbs, and established parametric lower body models for three body types.Relevance to industry3D human modeling is an important part of garment industry digitization. This research provides an effective way to construct a parametric 3D lower body model. The method offers a reference for the parametric virtual human modeling and virtual fitting of trousers.     

基于xPC的气压ABS调节器动态参数测控系统开发

对反映气制动ABS调节器性能的静态参数和动态参数进行分析,提出基于xPC实时内核技术的动态数据采集系统设计;针对测试系统实现的关键技术进行了研究,主要包括测试软件界面设计及参数设置、通讯接口模块设计、数据实时保存与显示系统软件设计等;通过长期测试试验表明,系统采样频率可达1kHz,完全满足行业标准要求,从而证明系统开发的有效性和可靠性。     

Gain‐scheduled dynamic output feedback control for discrete‐time LPV systems

This paper presents synthesis conditions for the design of gain‐scheduled dynamic output feedback controllers for discrete‐time linear parameter‐varying systems. The state‐space matrix representation of the plant and of the controller can have a homogeneous polynomial dependency of arbitrary degree on the scheduling parameter. As an immediate extension, conditions for the synthesis of a multiobjective ??_∞ and ??₂ gain‐scheduled dynamic feedback controller are also provided. The scheduling parameters vary inside a polytope and are assumed to be a priori unknown, but measured in real‐time. If bounds on the rate of parameter variation are known, they can be taken into account, providing less conservative results. The geometric properties of the uncertainty domain are exploited to derive finite sets of linear matrix inequalities based on the existence of a homogeneous polynomially parameter‐dependent Lyapunov function. An application of the control design to a realistic engineering problem illustrates the benefits of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

保持几何特征的自适应弹性二次曲线模型

物体形状特征的准确提取往往受到图像获取、目标分割等过程中各种因素的影响,因而需要构造一种鲁棒的形状表现来保有其本质特征。揭示弹性二次曲线(EQW)模型中能量权重因子和样条重叠度因子与形状几何特性间的关系,提出一种自适应保持几何特征的EQW形状表现模型,并将该模型与交互式Live Wire算法相结合,应用至图像分割中,对于各种模态图像中的目标进行分割实验。直观上,本文方法能够在去除噪声同时较好地保持目标形状的显著特征;量化结果方面,交互式分割误差保持在较小稳定范围内,引入EQW模型带来的时间开销亦在可接受范围内。     

自适应的有效非局部图像滤波

研究了基于预选择的非局部均值滤波方法,并指出已有方法在提取图像子块特征方面的不足,利用梯度域奇异值分解(SVD) 提出一种自适应的有效非局部滤波方法。该方法对基于预选择的非局部滤波方法的贡献主要有:1)是一种基于图像子块结构特征的鲁棒预选择方法;2)研究了相似集大小与滤波性能的关系;3)相似子块的自动选取;4)提出一种局部自适应的滤波参数选取方法,根据图像局部内容的不同确定滤波参数。此外,利用欧氏距离的对称性进一步提高运行速度。实验结果表明:本文方法滤波后的图像在主客观方面都优于原算法和其他快速方法,且运行速度较快,是一种有效的滤波方法。     

小口径离轴抛物面反射镜挠性支撑设计分析

关于反射镜支撑稳定性优化设计问题,离轴抛物面反射镜作为空间光学遥感器的重要光学元件,面形精度直接影响遥感器性能。针对反射镜所处环境,组件一阶频率要求高,设计了一种反射镜背部中心单点挠性支撑结构,并利用拓扑优化技术对反射镜进行了轻量化设计。为了结构设计的合理性,采用有限元技术对反射镜组件进行了模态分析、结构强度分析、谐响应分析及热环境分析。分析结果表明:反射镜在重力作用下最大面形误差RMS=1.16nm;在±10℃温度载荷作用下最大面形误差RMS=11.46nm;反射镜组件一阶频率为574.19Hz。使挠性支撑结构具有良好的静、动态特性和热尺寸稳定性,满足反射镜面形要求。