我国金矿床氧化带的地质地球化学特征

根据氧化矿石的主要化学成分，应用ＦＡＳ图解进行氧化矿石的化学成分分类；通过对氧化带分带及发育型式的研究，建立了我国金矿氧化带形成的地质地球化学模式；对影响氧化带发育的因素进行了初步探讨。     

水轮机电液调速器人工失灵区的分析计算

本文对电液调速器的人工失灵区电路进行定量分析，导出了失灵区的一套计算公式，并指出失灵区与调差率、功率偏差的内在关系。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

矫直状态下钢管弹塑性变形区的研究

根据钢管矫直时的变形规律，通过对矫直中钢管的力学状态及矫直前后的状态参数分析，建立了一种适于现场应用的确定钢管弹、塑性变形区的新方法。     

Influence of water and accelerated aging on the shear fracture properties of glass/epoxy composite

The degradation of interlaminar shear strength and shear fracture toughness of glass/epoxy composites due to uptake of distilled water and sea water has been studied. The composites were immersed in water for up to eight months at temperatures up to 70 °C. Unreinforced matrix resin samples were also immersed for periods up to 2 years. Sea water was absorbed less rapidly than distilled water. Weight gains below 1% did not influence the shear strength while higher weight gains reduced shear strength up to 25%. The loss in apparent interlaminar shear strength was uniquely related to specimen weight gain. Mode II fracture toughness, G _IIc, also decreased with increasing immersion time after an initial incubation period, but the accelerated tests were found to reduce G _IIc less than the room temperature tests at comparable weight gains.     

全断面双护盾掘进机在引黄工程断层破碎带的卡机处理

万家寨引黄工程国际Ⅱ、Ⅲ标已查明的断层有34条，隐伏断层可能还有一些，除了利民堡区域性大断层（F32）外，较大的集中于7#洞北段59＋700—68＋820，主要有F65、F70、F90、F74。全断面双护盾掘进机适应于较复杂的地质条件，因此在通过断层破碎带时一般都较正常。但在通过引黄工程区域性大断层F65时，发生了卡机事故，处理用了3个月时间。该文对处理TBM卡机事故的施工进行了总结。     

标准型直燃机在严寒地区应用探讨

介绍了标准型直燃机的分类、原理及长庆至呼和浩特输气管道工程冷冻供热站的设计实例 ,重点论述了标准型直燃机在严寒地区使用的利弊     

渤海湾盆地复式油气聚集带高勘探程度区进一步挖潜的领域

渤海湾盆地复式油气聚集区经过了40年的勘探,目前已进入了高勘探程度区.油气聚集的复杂规律表明,渤海湾盆地仍具有巨大的资源潜力,进一步挖潜的领域非常广阔.以第三系为烃源岩的含油气层系的勘探精度仍有待于进一步提高,同时必须将以古生界、中生界和中上元古界为烃源岩的含油气层系作为今后挖潜的重要领域.渤海湾盆地任何层系都可能形成和聚集油气,因此仍有多种复杂的油气藏类型尚待进一步认识和发现.     

井眼剪切带分叉研究

井眼基本破坏形式是由于不稳定性造成的井眼岩石崩落坍塌和剪切带。井眼破坏的非均匀性采用传统的理论和方法不能得到较好的解释和预测。采用材料的分叉分析方法和变形局部化的数值模拟研究 ,可望对井眼失效的机理分析、预测和控制提供新的思路