覆膜滤料的滤尘性能测试方法研究

由于覆膜滤料的结构和性能有别于普通滤料，因而普通滤料的滤尘性能测试方法不完全适用于覆滤料。本文作者在总结实践经验的基础上，提出了在覆膜滤料的滤尘性能测试中应注意的一些问题和应增加的测试项目。     

手持式GPS测量在地球化学勘查中的应用

在大比例尺的化探测量中，用GPS单点绝对定点技术来进行测网的布设，减少了控制测量环节。降低了生产成本。因此，GPS绝对定点在化探测量中仍有应用的前景。但是，绝对定位时必须做到：(1)合理选择校正的控制点(三角点或四角点)；(2)正确校正参数；(3)定期地检测仪器；(4)保证仪器的高度角和有效工作时间。本次该方法应用在化探的测网布设中。实测面积7km^2，经传统测量仪器检查验收，证明文中提出的方案完全可以用于生产实践。     

测井相识别模型及其在东海油气勘探中的应用

文章提出一种测井相识别模型,该模型用常规测井信息,定量地确定测井相在钻遇地层中的空间位置,建立测井相。配合东海油气勘探工作,用该识别模型对苏堤构造带的钻遇地层进行了测井相分析。     

复合多功能通风管道的性能及在空调系统中的应用

详细介绍了复合多功能通风管道的各种性能,并与薄钢板通风管道作了比较,指出了其在空调系系统中的推广应用具有广阔的发展前景。     

UCT测井技术在河南油田的应用

介绍了超声波固井质量检测仪(UCT)的原理、结构及测井方法，分析了UCT测井资料的应用情况。实践表明，UCT能准确地探测套管腐蚀，直观评价水泥与套管、水泥与地层一、二界面的胶结质量。     

后浇带质量控制的措施

后浇带起着超长建筑的温度伸缩、高层建筑高层部分与裙房间沉降缝的作用,已普遍采用,但有些工程由于施工不当,设了后浇带起不到应有作用,本文就施工中如何采取有效措施,对后浇带的质量进行控制,作了探讨,以期能真正发挥后浇带的作用。     

Inference for pth‐order random coefficient integer‐valued autoregressive processes

Abstract. A pth‐order random coefficient integer‐valued autoregressive [RCINAR(p)] model is proposed for count data. Stationarity and ergodicity properties are established. Maximum likelihood, conditional least squares, modified quasi‐likelihood and generalized method of moments are used to estimate the model parameters. Asymptotic properties of the estimators are derived. Simulation results on the comparison of the estimators are reported. The models are applied to two real data sets.     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

FHCF: A Simple and Efficient Scheduling Scheme for IEEE 802.11e Wireless LAN

The IEEE 802.11e medium access control (MAC) layer protocol is an emerging standard to support quality of service (QoS) in 802.11 wireless networks. Some recent work shows that the 802.11e hybrid coordination function (HCF) can improve significantly the QoS support in 802.11 networks. A simple HCF referenced scheduler has been proposed in the 802.11e which takes into account the QoS requirements of flows and allocates time to stations on the basis of the mean sending rate. As we show in this paper, this HCF referenced scheduling algorithm is only efficient and works well for flows with strict constant bit rate (CBR) characteristics. However, a lot of real-time applications, such as videoconferencing, have some variations in their packet sizes, sending rates or even have variable bit rate (VBR) characteristics. In this paper we propose FHCF, a simple and efficient scheduling algorithm for 802.11e that aims to be fair for both CBR and VBR flows. FHCF uses queue length estimations to tune its time allocation to mobile stations. We present analytical model evaluations and a set of simulations results, and provide performance comparisons with the 802.11e HCF referenced scheduler. Our performance study indicates that FHCF provides good fairness while supporting bandwidth and delay requirements for a large range of network loads. Pierre Ansel received a multidisciplinary in-depth scientific training in different fields such as Pure and Applied Mathematics, Physics, Mechanics, Computer Science and Economics from the Ecole Polytechnique, Palaiseau, France. Then, he joined the Ecole Nationale Superieure des Telecommunications, Paris, France in 2005 where he went further into electronics, databases, computer network security and high speed networks. He received a multidisciplinary master of sciences degree and an additional master of sciences degree in telecommunications in 2005. He did a summer internship in 2003 in INRIA, Sophia Antipolis, France where he worked on the Quality of Service in 802.11 networks at Planete Group, France. Then in 2004, he joined France Telecom R&D, Issy-les-Moulineaux, France to work on Intranet Security issues. He designed a WiFi security supervision architecture based on WiFi Intrusion Detection Sensors. He is currently a French civil servant and belongs to the French Telecommunications Corps. Qiang Ni received the B.Eng., M.Sc. and Ph.D. degrees from Hua Zhong University of Science and Technology (HUST), Wuhan City, China in 1993, 1996 and 1999 respectively. He is currently a faculty member in the Electronic and Computer Engineering Division,School of Engineering and Design, Brunel University, West London, U.K. Between 2004 and 2005 he was a Senior Researcher at the Hamilton Institute, National University of Ireland, Maynooth. From 1999 to 2001, he was a post-doctoral research fellow in the multimedia and wireless communication laboratory, HUST, China. He visited and conducted research at the wireless and networking group of Microsoft Research Asia Lab during the year of 2000. From Sept. 2001 until may 2004, he was a research staff member at the Planète group of INRIA Sophia Antipolis France. Since 2002, he has been active as a voting member at the IEEE 802.11 wireless LAN standard working group. His current research interests include communication protocol design and performance analysis for wireless networks, cross-layer optimizations, vertical handover and mobility management in mobile wireless networks, and adaptive multimedia transmission over hybrid wired/wireless networks. He has authored /co-authored over 40 international journal/conference papers, book chapters, and standard drafts in this field. He is a member of IEEE. E-mail: Qiang.Ni@ieee.org Thierry Turletti received the M.S. (1990) and the Ph.D. (1995) degrees in computer science both from the University of Nice – Sophia Antipolis, France. He has done his PhD studies in the RODEO group at INRIA Sophia Antipolis. During the year 1995–96, he was a postdoctoral fellow in the Telemedia, Networks and Systems group at LCS, MIT. He is currently a research scientist at the Planete group at INRIA Sophia Antipolis. His research interests include multimedia applications, congestion control and wireless networking. Dr. Turletti currently serves on the Editorial Board of Wireless Communications and Mobile Computing.     

后热处理对新型马氏体耐热钢焊缝性能的影响

针对电力施工过程中对具有冷裂倾向的马氏体型耐热钢焊后后热处理时机选择与标准存在差异，即是否必要在冷却至100-120℃恒温一段时间后再进行后热处理的问题，安排了一系列的试验对后热处理的最佳时机予以讨论，对热处理后的焊缝组织进行力学性能试验和金相分析，对冲击后的试样进行了断口分析。试验证明，后热处理时机的不同对马氏体耐热钢焊缝冲击韧度有比较大的影响，马氏体耐热钢的后热处理应在马氏体转变完全后开始较为合适。