Application of Galerkin Method to Dynamical Behavior of Viscoelastic Timoshenko Beam with Finite Deformation

The motion equations governing the dynamical behavior of a viscoelasticTimoshenko beam with finite deformation are derived and simplified byGalerkin method. The viscoelastic material is assumed to obey thethree-dimensional fractional derivative constitutive relation. Thedynamical behaviors of the simplified systems with order 1 and order 2are numerically computed and compared by using the computational methodpresented by the authors. The dynamical behaviors of the systems areuniform qualitatively, but there is a little deviation quantitatively.And the truncated system with order 1 is safer than the one of order 2.It is also shown that the lower order system is reasonable. Theinfluences of the load parameter and the fractional derivative parameter(material parameter) on the deflection of the beam are consideredrespectively. The numerical methods in nonlinear dynamics, such as phasediagram, and Poincaré section, are applied to reveal dynamical behaviorsof the nonlinear viscoelastic Timoshenko beam. There are plenty ofdynamical behaviors, such as periodicity, bifurcation, quasi-periodicityand chaos in the dynamical system.     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

Experience with Applying Formal Methods to Protocol Specification and System Architecture

In the last three years or so we at Enterprise Platforms Group at Intel Corporation have been applying formal methods to various problems that arose during the process of defining platform architectures for Intel's processor families. In this paper we give an overview of some of the problems we have worked on, the results we have obtained, and the lessons we have learned. The last topic is addressed mainly from the perspective of platform architects.     

小浪底水库调水调沙运用对大坝变形的影响分析

自2002年以来,小浪底水库汛前利用预泄汛限水位以上水量、腾空防洪库容的有利时机,连续5年进行集中调水调沙,获得了巨大的减淤效益.但在调水调沙期间,由于大流量下泄,水库水位下降较快,大坝变形明显增大,表现为水平位移向上游变化、垂直位移加速沉降变化的特点.监测分析结果表明,调水调沙运用不影响大坝安全稳定运行.     

薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

Influence of load and speed on wear characteristics of grey cast iron in dry sliding — selection for minimum wear

The wear of grey cast iron in dry sliding conditions has been studied with the aims of (1) finding the influence of working conditions on the wear rate, and (2) determining the region of speed and load where low wear is accomplished. Grey cast iron with flake and nodular graphite was submitted to investigation using a pin-on-disc machine. The results indicate that the flake graphite cast iron is more suitable for applications at speeds greater than 4 m s⁻¹ and lower loads, while nodular cast iron has greater wear resistance at lower speeds in the range of loads investigated - from 50 N cm⁻² to 200 N cm⁻²     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

��ɫ������������ѡ�꾮Һ����ģʽ

本文应用灰色关联分析方法,对70种不同类型和组成的钻井液,进行了两参数流变模式优选及评价。与现行方法比较的结果表明此方法与现行结果的吻合度高,并有新颖、数据要求量少、结论易于比较等优点。     

激光在塑性变形测量中的应用

本文将激光应用于云纹法，研究了缺口滚压强化后根部区域的位移场及应变分布规律。结果表明，本方法是提高塑性变形测量精度的有效手段。