天荒坪电站500 kV开关站开挖与边坡整治施工——兼论开挖爆破对高边坡稳定的影响及对策

在大型水利水电施工中，经常遇到岩质高边坡稳定问题，天荒坪抽水蓄能电站５００ｋＶ开关站所处的地形地质条件非常复杂，本文着重介绍在边坡开挖和支护过程中，根据不同的地形地质情况所采取的控制爆破和支护措施。     

边坡锚固优化设计理论与应用

论述了边坡锚固优化设计的概念、原理及方法，并运用该理论对牛矿东山头滑体的加固设计进行了实例分析。     

稀土在搪瓷面釉上应用的研究

采用稀土氧化物和无机化合物的复合物（不简称ＲＩ－复合物）作为搪瓷釉浆悬浮剂，使之全部或大部分代替粘土，进行了一系列试验，已获得成功，突破了长期来搪瓷工业离不开粘土的传统工艺，并实现了工业化生产。     

凸非球面补偿检验的工艺球面分析解

本文从三级像差理论出发,推导了几种工艺球面检验凸二次曲面的计算公式。根据这些公式计算结果,进行了光路追迹,给出了这些公式对凸二次曲面的补偿范围;并讨论了几种特殊情况下的平面解。     

平衡纵剖面数值试验及其对防洪的影响研究

本文采用一维非恒定流非均匀沙的水沙数学模型，以长江中游螺山汉口河段为背景，进行了根化数值模拟试验，分析了该概化河段平衡纵剖面的变化规律及其与上游来水来沙条件的关系，并和相应的理论公式进行了比较。在此基础上，对水沙条件发生较在变化时的平衡纵比降以及带来的对长江中下游防洪的影响进行了分析。     

A new surface characterization technique: RIMAPS (Rotated Image with Maximum Average Power Spectrum)

This work introduces a new imaging technique, Rotated Image with Maximum Average Power Spectrum (RIMAPS), for use in determining orientation and characteristics of surface topography. It consists of computing the maximum value of the averaged power spectrum, given by one step of the two‐dimensional Fourier transform, for each angle of rotation of a digitized image. The basic measurement science of this technique is described and different cases are studied. The characterization of simple geometrical figures explains the meaning of peaks and their angular positions given by RIMAPS analysis. A known surface pattern made on a sample of pure copper, mechanically ground, is used to study reproducibility, dependence on image quality and topography scale relative to pixel size and magnification. Samples of pure zinc, mechanically ground and chemically etched, were used to show the main features of RIMAPS analysis when characterizing a more complicated pattern on a real surface. All the studies performed under different conditions for observation and acquisition of images give strong evidence of the stability and robustness of RIMAPS as a technique for the characterization of topography.     

黑河干流中游地区耗水量变化的历史分析

黑河流域水资源极其匮乏，加之地区上的配置不均衡和中游地区水土资源的过度开发，导致黑河下游出现了严重的生态环境问题，已影响到我国北方广大地区生态环境质量，受到国家的高度重视和全社会的广泛关注。黑河水资源开发利用主要集中在中游地区，该区是全国重要的商品粮、蔬菜和经济作物生产基地之一，耗水量占流域耗水量的85％以上，是黑河的主要耗水区和径流利用区。利用黑河上游控制站莺落峡站和中游控制站正义峡站水文资料，分析了黑河中游耗水量的变化，结果表明：20世纪80年代以前黑河中游耗水量在4．4亿m^3左右，比较稳定；进入20世纪80年代以后，耗水量明显增加，80年代耗水量比70年代以前增加了1．97亿－2.49亿m^3;90年代耗水量又比80年代增加了1.64亿m^3左右；80年代以来流域耗水量呈明显增加的趋势，这是以人类活动影响为主的结果。     

APPLICATION OF RESPONSE SURFACE METHODOLOGY FOR THE MAXIMIZATION OF CONCORA CRUSH RESISTANCE OF PAPERBOARD

Response surface methodology is often used by researchers in different fields to determine the optimum values for controlled variables to maximize or minimize the response variables. Either maximization or minimization might be necessary depending on the response property. For example, if the response variable represents the yield of a process, maximization could be necessary; on the other hand, if the response variable is the biological oxygen demand (BOD) of an effluent the aim would definitely be minimization

Response surface methodology can be used two ways. It can be applied to the full-scale production or it can be scaled to a laboratory or the pilot plant. When applied to the full-scale production, the method is known as evolutionary operation (EVOP). EVOP is the continuous optimization of a process. The optimum conditions in a production plant can change depending on many factors such as raw material, ambient temperature, and equipment wear. Therefore, controlled variables should be optimized continuously to keep the response variable as close as possible to the maximum or minimum value. Hence, controlled variables are systematically changed around a center point to depict any shift of the response variable from the extreme. A thorough discussion of EVOP is given by Box, Evolutionary Operation: A Method for Increasing Industrial Productivity, Appl. Statist., 6, 81-101 (1957).