中原油田-曲阜-济南天然气管道工程沿线土壤腐蚀性评价

依据SY／T0007—1999《钢质管道及储罐腐蚀控制工程设计规范》对中原油田-曲阜-济南天然气管道工程沿线土壤进行了腐蚀评价，指出该管道沿线土壤以中强性腐蚀为主，文章对土壤腐蚀评价过程进行了较详细的介绍。     

添加稀土引致的磷化膜变化与促进机制

用能谱与SEM分析，发现加入稀土硝酸盐(REN)后明显提高了无定形晶体Zn2Fe(PO4)2在磷化膜表面的覆盖率，而使得膜的耐蚀性能提高.此时膜内相关元素含量比例发生了变化：P增大,Zn减小，可见磷对膜耐蚀性的贡献比锌大.讨论认为，稀土硝酸盐是一个有良好载氧能力的催化剂，具有良好的成核促进作用和阴极去极化作用，从而能加速磷化并使膜的耐腐蚀性能提高.      

Advances in the research of nitrogen containing stainless steels

The current status of nitrogen containing stainless steels at home and aboard has been introduced. The function and existing forms of nitrogen in the stainless steels, influence of nitrogen on mechanical properties and anti-corrosion properties as well as the application of nitrogen containing cast stainless steels were discussed in this paper. It is clear that nitrogen will be a potential and important alloying element in stainless steels. And Argon Oxygen Decarbonization (AOD) refining can provide an advanced manufacture process for nitrogen containing stainless steels with ultra-low- carbon and high cleanliness.     

土壤中阴离子对碳钢腐蚀的影响

应用弱极化曲线技术和交流阻抗谱研究了土壤中C1-、SO4^2-、CO3^2-、NO3-离子对碳钢腐蚀的影响。结果表明：阴离子对碳钢腐蚀的影响是显著的。当土壤中分别添加Cl-、CO3^2-、NO3-离子时，随着阴离子含量的增大，碳钢的腐蚀速率增大，在某一离子含量时，腐蚀速率达到最大，然后腐蚀速率随着离子含量的增加而减小。在含SO4^2-离子的土壤中随着SO4^2-离子含量的增大，土壤中碳钢的腐蚀速率增大。在有四种阴离子土壤中，阻抗谱均为单容抗弧，且大都在低频区出现扩散弧。     

Grinding-hardening with liquid nitrogen: Mechanisms and technology

This paper studies an innovative development of a steel grinding–hardening technology using an inert cryogen—liquid nitrogen. It was found that phase transformations took place during grinding with the application of liquid nitrogen and resulted in hardened surface layer in a ground component. The layer had a fine laths martensite structure which gave rise to a remarkably high hardness. It was also shown that the treatment can produce superior surface integrity, with compressive surface residual stresses and without surface oxidation. Due to the inert nature of the liquid nitrogen, the grinding process becomes environmentally conscious.     

水洗钽粉中氮的测定

针对水洗钽粉中杂质元素的干扰,采用EMGA-620W氧氮分析仪,测定了水洗钽粉中的氮,并与脉冲气相色谱法测氧氮(联测)进行了比较,认为该法快速、准确、可靠。     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.     

影响PET树脂反应活性因素的分析

探讨了影响连续固相增粘产品活性的因素，提出了控制主反应器的温度、氮气流量、基础切片的端羧基、氮气露点等主要因素，实现生产的平稳控制，从而保证产品黏度的稳定。     

甲醛法测定铵盐含氮量

对甲醛法测定铵盐含氮量进行了研究，提出采用百里酚酞和酚酞混和指示剂进行测定。该法简单、快速、准确，能满足生产实际和样品检验需要。     

Fabrication of TiO2 composite materials for air purification by magnetic field effect and electrocodeposition

Novel air purification materials were fabricated by the application of a magnetic field. In a magnetic field perpendicular to a copper plate, nickel particles with a diameter of 10 m were arranged to form numerous pillar-like structures on the matrix surface, and copper as a binder was deposited onto the three-dimensional surface. The total surface area of the pillars and the matrix increased with the magnetic flux density, up to about 800 cm² per cm² of the original matrix surface at 6.2 T. After successful codeposition of TiO₂ particles on the fabricated materials by electroplating, their photocatalytic activities were evaluated on the basis of the removal efficiency of nitrogen oxides (NO _x ), which are some of the most hazardous air pollutants. It was concluded that the samples with the pillar-like structures had two opposite characteristics: large surface area as a positive effect and shadowing against ultraviolet (UV) irradiation as a negative effect. However, total photocatalytic activity increased to twice as much as that of the flat sample by improving the UV irradiation method and the preparation condition of the materials