煤矿井下高压降尘供水系统监控装置的研制

根据煤矿井下高压降尘系统对供水的要求,研制了一种基于PIC18F4580单片机的井下高压降尘供水系统监控装置,介绍了该装置的硬件和软件设计。该装置可实时监测水箱水位、压力、运行状态,并可将这些保护状态信息通过CAN总线接口和转换单元并入煤矿监测监控网,实现远程监测。实验结果表明,该监控装置达到了设计要求,能保证高压降尘供水系统的实时监测与安全运行。     

Screening model for assessing ‘cost’ of minimum flow requirements in the Svartå River,Sweden

The minimum flow requirements in the Svartå River in Sweden are directed at maintaining fishlife and providing suitable dilution for waste flows. The implications of varying the minimum flow requirements in the river are examined using a mixed integer optimisation model. The model is formulated as a modified method-of-weights technique with the economic issues of hydro-electricity generation, irrigation and urban water supply placed in the objective function and the minimum flows specified within the constraint set. The integer component of the model is required to model the operating policy at the major flow regulation facility in the system and the restricted validity of the irrigation permits. Application of the model shows that in dry years where competition between minimum flow levels and the other economic uses, is most intense, the levels achieved by the various economic objectives are only slightly reduced even with significant increases in the minimum flow requirements. Variations in minimum flow requirements of up to 45% only produce changes of 10% or less in the economic objectives. The lack of sensitivity of the objective levels is due primarily to the level of control exerted indirectly on the whole system in dry years by the release regulation policy and the restricted validity of the irrigation permits. In normal to wet years these policies are not as restrictive and more choice is available. In such years, however, there is generally sufficient water to satisfy all requirements and allocation is not a critical issue. The model itself is formulated generally so that a range of scenarios beyond those examined specifically in the paper can be considered.     

A generalized equation for surface tension from the triple point to the critical point

A three-parameter generalized equation is proposed for surface tension from the triple point to the critical point. This equation not only fits the data well but also is good for interpolation between the normal boiling point and the critical point. This equation is also good for extrapolation to the triple point. This equation has been tested using the surface tension of water from the triple point to the critical point. The constants of this equation obtained using orthobaric surface tensions are given for a number of compounds. The isobaric surface tensions determined at a pressure of 1 atm do not differ significantly from the orthobaric surface tensions. Such data also have been used in obtaining equations from the triple to the critical point.Nomenclature T _c Critical temperature, K - T _t Triple point, K - T _m Melting point, K - T _r Reduced temperature, K - X (T _c-T)/T _c - Surface tension, dyne · cm^–1;10^–3N · m^–1 - _m Surface tension at the melting point - _f Surface tension at T _r=0.9 - _t Surface tension at the triple point - Relative deviation 100[ _obsd– _calcd]/ _obsd - Standard deviation [( _obsd– _calcd)²/(No. points—No. parameters)]^0.5     

一种简便的饮用水除铀方法及其机理

本文介绍一种利用原水中含有的无机盐,加入廉价的化学试剂除去饮用水中微量铀的简便方法。并对其除铀机理进行了探讨,证明除铀主要是以软化水过程中产生的氢氧化镁表面吸附共沉淀机理进行的。     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable     

用仪器中子活化分析法检验环境土壤标样的均匀度

近年来,国际上标准参考物质的种类与数量急剧增加,一些重要的领域,象地球化学、环境科学、生物学等都有了相应的SRM。国内研制SRM的工作也十分活跃。 标准样品必须均匀,故在分析定值和样品发行前,需要先作均匀性检验。由于均匀性是一个相对的概念,它与各个元素在SRM中的分布紧密相关。取样量直接影响均匀性的好坏。因此,当给出SRM中某元素的均匀性数值时,必须注明相应的取样量。由于仪器中子活化分析法(INAA)具有灵敏度高、不破坏试样、且可同时测定多种元素等特点,因此可在较小的取样量情况下,实现对SRM中多种痕量元素的均匀性检验。     

Water vapor and oxygen permeability of wax films

The water vapor (WVP) and oxygen (O₂P) permeabilities of beeswax (BW), candelilla wax (CnW), carnauba wax (CrW) and microcrystalline wax (MW), formed as freestanding films, were determined. CnW and CrW both had small values for O₂P (0.29 and 0.26 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹⁴, respectively), which are less than half the value for high-density polyethylene and about a decade greater than the value for polyethylene terephthalate. O₂P values for BW and MW were about 6−9× greater than those of CnW and CrW. WVP of CnW was 0.18 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹², which is about one-half the value for CrW and MW and about one-third the value for BW. The WVP of CnW was somewhat less than that of polypropylene and somewhat greater than that of high-density polyethylene. Differences in permeabilities among the wax films are attributed mainly to differences in chemical composition and crystal type as determined by X-ray diffraction.     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.     

气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。