电力UPS的技术分析及在水电站的应用

分析了电力UPS电源装置的结构类型以及其基本技术特性,对各种类型的电力UPS电源结构的优缺点进行比较,结合水电站自身负荷特性和重要性提出选择电力UPS电源装置的一些观点。分析了几例在水电站工程应用UPS中出现问题的根源,提出如何在水电站的应用中综合考虑经济性和技术性,合理配置电力UPS电源装置。     

三参数最小费用流算法研究

本文提出三参数网络流,在加工能力和制造费用的基础上,增加了成材率．三参数网络流便于描述包含物理化学变化的钢铁、化工等制造流程．还给出了三参数网络流最小费用问题的求解方法,并给出了计算实例．     

Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc

Abstract： The hot deformation behaviors of AI-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340-500℃ and a strain rate range of 0.001-10 s 1 using uniaxial compression test on Gleeble-1500 thermal simulation machine. The results show that the flow stress increases with increasing strain and tends to be constant after a peak value. The flow stress increases with increasing strain rate and decreases with increasing deformation temperature. The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions. Based on the hyperbolic Arrhenius-type equation, the true stress-true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants （α, β, Q, n and A）, which reveals the dependence of the flow stress on strain, strain rate and deformation temperature. The predicted stress-strain curves are in good agreement with experimental results, which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.     

Fluid flow characteristics of single inclined circular jet impingement for ultra-fast cooling

The fluid flow characteristics of the single bunch inclined jet impingement were investigated with different jet flow velocities, nozzle diameters, jet angles and jet-to-target distances for ultra-fast cooling technology. The results show that the peak pressure varying significantly from nearly 0.5 to above 13.4 kPa locates at the stagnation point with different jet diameters, and the radius of impact pressure affected zone is small promoted from 46 to 81 mm in transverse direction, and 50 to 91 mm in longitude direction when the jet flow velocity changes from 5 to 20 m/s. However, the fluid flow velocity is relatively smaller near the stagnation point, and increases gradually along the radius outwards, then declines. There is an obvious anisotropic characteristic that the flow velocity component along the jet direction is about twice of the contrary one where the jet anlge is 60°, jet diameter is 5 mm, jet length is 8 mm and jet height is 50 mm.     

基于模型预测前馈-反馈控制的斗轮机上煤系统的优化

利用电厂悬臂式斗轮机循环往复式回转取煤过程中存在重复性的特点,记录前一回转周期取煤过程中的瞬时流量、悬臂回转速度和回转角度等数据,作为当前回转周期取煤时的煤层模型预测依据并进行前馈控制,以克服大迟延环节的影响;同时针对煤层模型预测不能准确预知当前取煤过程中突发的扰动,引入反馈系统进行控制,以解决煤层塌方等引起超载的问题.多次现场运行数据分析的结果表明,与原来的上煤系统相比,采用本方法的上煤流量更均匀,上煤效率更高.     

不同约束下机组组合决策结果的分析

机组组合因其约束集合的不同而具有不同的侧重点,因而适用于不同的场景。本文以单母线模型、计及直流潮流约束、计及交流潮流约束三类不同约束集下的机组组合问题为例,通过对决策结果的分析,探讨了网络约束制约机组启停的机理及三者之间的关联关系,并对其各自适用的场合提出建议。     

长春市粉煤灰蒸压加气混凝土围护结构传热系数现场检测分析

本文分析了传热系数现场检测方法的原理及适用条件,用热流计法检测粉煤灰蒸压加气混凝土围护结构的传热系数,并将实测数据与设计值、理论计算值进行了分析与研究．     

基于WSN和GPRS融合的大盈江水系河流生态流量监测系统研究

传统条件下的河流生态流量依靠经验和人工进行管理,根据经验和抽样得出数据,缺乏准确的数据依据及科学合理的统一规划。以云南大盈江水系为例,提出基于WSN和GPRS融合的河流生态流量数字监测系统研究,根据河流实际情况给出河流生态流量模型,确定水量监测设备模型,实现WSN与GPRS融合网络设计。