次生伽马能谱分析方法的实验研究

本文指出一种地化学闭合模型的热中子瞬发活化伽马分析方法，它是地球化学测井的核心技术，标准谱的获得，基于标准谱的加权最小二乘解谱方法、灵敏度刻度及地球化学闭合模型是这一方法的关键环节。     

线性矩阵方程异类约束最小二乘解的迭代算法

多矩阵变量线性矩阵方程(LME)约束解的计算问题在参数识别、结构设计、振动理论、自动控制理论等领域都有广泛应用。本文借鉴求线性矩阵方程(LME)同类约束最小二乘解的迭代算法,通过构造等价的线性矩阵方程组,建立了求多矩阵变量LME的一种异类约束最小二乘解的迭代算法,并证明了该算法的收敛性。在不考虑舍入误差的情况下,利用该算法不仅可在有限步计算后得到LME的一组异类约束最小二乘解,而且选取特殊初始矩阵时,可求得LME的极小范数异类约束最小二乘解。另外,还可求得指定矩阵在该LME的异类约束最小二乘解集合中的最佳逼近解。算例表明,该算法是有效的。     

Adaptive model predictive inventory controller for multiproduct warehouse system

An inventory control system has been developed for a distribution system consisting of a single multiproduct warehouse serving a set of customers and purchasing products from multiple vendors. Purchase orders requesting multiple products are delivered to the warehouse in a process referred to as joint replenishment. The receipt of customer orders by the warehouse proceeds in order intervals and in order quantities that are subject to random fluctuations. The objective of warehouse operation is to minimize the total cost while maintaining inventory levels within the warehouse capacity by adjusting the purchase order intervals and quantities. An adaptive model predictive control algorithm is developed using a periodic square wave model to represent the material flows. The adaptive concept incorporates a stabilized minimum variance control-type input calculation coupled with input/output stream parameter predictions. The boundedness of the control output under the suggested algorithm is mathematically proven under the assumption that disturbances in the orders are bounded. The effectiveness of the scheme was demonstrated using simulations.     

一种检测单晶炉热场温度的新方法

为去除单晶炉热场温度测量信号中的低频干扰、提高温度信号的估计精度,本文提出了一种基于跨维模拟退火(trans dimensional simulated annealing,TDSA)的单晶炉热场温度检测方法.该方法首先将AIC(Akaike information criterion)信号个数判断准则纳入采样机制中以便对干扰个数采样估计,进而利用所设计的基于信号频谱和轮盘赌思想的Metropolis Hastings机制对相应个数的干扰频率进行采样,最后设计了混合均匀和高斯采样机制对单晶炉热场温度进行采样估计.仿真和单晶炉工程实验结果表明,该方法在干扰个数未知的情况下,能够有效地抑制低频干扰、准确检测单晶炉热场的温度.     

半参数广义线性模型惩罚似然估计的几个性质

本文在给出了半参数广义线性模型惩罚似然估计及惩罚准似然估计的基础上,得到了下面几个性质:(Ⅰ)极小惩罚似然估计及惩罚准似然估计等价于惩罚加权最小二乘估计;(Ⅱ)估计的收敛性及加速收敛法;(Ⅲ)估计的一种 Bayes 解释。     

搅拌设备设计的几点体会

从搅拌轴的支承条件、轴承间最佳距离的确定以及搅拌轴的稳定器等几个方面讨论 ,分析了其对搅拌设备设计的影响 ,并提出了相应的措施和方法。     

Three Dimensional Modeling of Shaft with Process Structures on CATIA

Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodruff/gib head taper keyseats, grinding undercuts, straight-sidedsplines, circlip slots and collars. The modeling steps are arranged in dialog menu interface by VB 6.0, the shaft creator, that permits users input geometric feature based parameters explicitly, and the standardized processdata are reorganized in Excel files that can be invoked correspondingly in the modeling procedure. It is aimed that this process may supply a simple way for shaft rapid modeling and comprehensive discipline for engineering students in their professional design activities.     

基于湍流自旋理论的二维方腔旋转流动的数值模拟

基于湍流自旋理论对旋转方腔内不可压流体的流动进行了二维数值模拟,用有限容积法在交叉网格上对控制方程进行离散,采用SIMPLEC算法进行计算,对流项的离散方面采用了延迟修正的QUICK格式,最后采用二维的TDMA算法进行迭代求解,并对边界条件处理采用了Block块技术.同时与经典理论即Navier-Stokes（N-S）方程的模拟情况做了比较.得出下列结论：N-S方程表明方腔旋转时内部流体只会作刚体旋转;而自旋模型表明该类流动具有不平凡性和不稳定性：即流体的内聚力不足以使流体跟随固体边界作刚体运动,旋转边界必然在流体中诱导出小尺度耗散涡旋,这些小尺度涡旋在固壁附近组织出正负相间的拓扑缺陷（涡旋场强）,这一流体定向奇性会与速度场耦合,并容易形成复杂的大尺度的涡旋运动.     

异步脑—机接口的空闲状态检测新方法*

提出一种新的空闲状态检测方法,以训练集中各类运动想象样本的类内散度和正确检测率为指标,结合接收机曲线确定分类阈值,设计最佳三分类器,并采用模糊化技术对预测标签进行处理。将该方法应用于2005年BCI竞赛数据IVc,测试的均方误差为0.278 7。实验结果验证了该方法的有效性。