多级复合芯结构的强化沸腾传热研究

采用固相烧结技术制备了均匀多孔层、复合16芯和复合32芯三种多孔结构,并且建立了池沸腾传热测试系统来研究不同芯数量、粒径与结构高度对多孔结构沸腾传热性能的影响。实验结果表明,在测试范围内复合层高1 mm的多孔复合32芯结构传热性能较强,临界热通量(CHF)最高为386 W/cm²,传热系数最高达到9.5 W/(cm²·K)。同时利用高速摄影观察气泡行为来研究强化沸腾传热机理。可视化数据表明,相比于光滑表面,在高热通量下多孔复合表面上气泡周期更短,脱离更快,气泡的离开带来了更多的液体补充,进而不断提升传热性能,获得更高的CHF值。     

基于丝网探针的螺旋管内气液两相流气泡行为研究

核反应堆蒸汽发生器的传热面由螺旋管束组成。螺旋管的三维螺旋结构使得泡状流和塞状流等气液两相流中的气泡在重力、离心力和浮力等作用下在管道内部呈现不对称的相分布状态,两相滑移速度增大,显著影响换热性能并导致DNB型传热恶化难以预测。实验介质为空气-水,结合自主开发的电导式丝网探针技术并发展先进的数据后处理算法,实现了复杂流场的三维时空重构和离散气泡粒径的精细测量,获得了螺旋管内泡状流和塞状流的截面空泡分布规律。基于研究结果,可根据气泡分布规律对螺旋管道的几何结构进行调整以避免传热恶化,为螺旋管式蒸发器的安全设计提供了基础数据和优化思路。     

电极上气泡分离行为及其强化技术研究进展

电解水作为大规模生产氢气的途径,增强电解水效率对于氢能源的生产具有十分重要的意义。而如何提高电解水工艺的电解效率是一个被广泛关注的问题。在电解过程中,电极两端产生的气体有三种去向：逸出电解槽、溶解于电解质中、附着在电极上。但在电解过程中,附着在电极上的气泡会严重影响电极与电解质之间的接触面积,直接降低了电解效率。降低气泡在电极上的停留时间能够有效增加电解质与电极的接触时间,提高产氢效率。本工作主要综述了近年来促进电解过程中极板上氢氧气泡从电极分离行为的研究,分别从极板属性、电流、溶液浓度和外加物理场这几个方面对气泡成核、生长、聚结和分离行为进行了具体的归纳总结,讨论了各种强化气泡分离方法的特点,并展望了未来的发展方向和路线,为未来的电解气泡脱离技术的研究提供参考。     

Gas marbles: ultra-long-lasting and ultra-robust bubbles formed by particle stabilization

Bubbles and foams are ubiquitous in daily life and industrial processes. Studying their dynamic behaviors is of key importance for foam manufacturing processes in food packaging, cosmetics and pharmaceuticals. Bare bubbles are inherently fragile and transient; enhancing their robustness and shelf lives is an ongoing challenge. Their rupture can be attributed to liquid evaporation, thin film drainage and the nuclei of environmental dust. Inspired by particle-stabilized interfaces in Pickering emulsions, armored bubbles and liquid marble, bubbles are protected by an enclosed particle-entrapping liquid thin film, and the resultant soft object is termed gas marble. The gas marble exhibits mechanical strength orders of magnitude higher than that of soap bubbles when subjected to overpressure and underpressure, owing to the compact particle monolayer straddling the surface liquid film. By using a water-absorbent glycerol solution, the resulting gas marble can persist for 465 d in normal atmospheric settings. This particle-stabilizing approach not only has practical implications for foam manufacturing processes but also can inspire the new design and fabrication of functional biomaterials and biomedicines.     

碱液系统液泛原因探讨及处理措施

分析碱液脏起泡液泛的原因,提出了解决方法并实施,解决了问题,为碱液系统的安全稳定运行提供保障。     

Mass‐transfer enhancement by a reversible chemical reaction across the interface of a bubble rising under Stokes flow

Mass transfer around a bubble rising in a liquid under Stokes regime is investigated when a reversible chemical reaction, , is taken into account. Four dimensionless parameters control the interfacial transfer rate: the Péclet and Damköhler numbers, the ratio of the diffusion coefficient of both species, and the reaction equilibrium constant. The mass‐transfer equations are solved numerically with a finite element technique. A boundary layer approach is also proposed and solved with a coupled technique of finite difference and Chebyshev‐spectral method. The equilibrium constant and the ratio of diffusion coefficients have a strong influence on the coupling between the chemical reaction and mass transfer leading to an increase of the Sherwood number. The interaction between the chemical reaction and advection is clearly established by the simulations. Conditions corresponding to Péclet number larger than the Damköhler number reduces the effect of the chemical reaction. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3376–3388, 2014     

Regime transition in viscous and pseudo viscous systems: A comparative study

A comprehensive quantitative study on the effect of liquid viscosity (1 ≤ µ_L ≤ 1149 mPa‐s) on the local flow phenomena of the gas phase in a small diameter bubble column is performed using ultrafast electron beam X‐ray tomography. The internal dynamic flow structure and the bubble size distribution shows a dual role of the liquid viscosity on the hydrodynamics. Further, the effect of solid concentration (C_s = 0.05, 0.20) on the local flow behavior of the gas phase is studied for the pseudo slurry viscosities similar to the liquid viscosities of the gas–liquid systems. The effects of liquid and pseudo slurry viscosities on flow structure, bubble size distribution, and gas phase distribution are compared. The bubble coalescence is significantly enhanced with the addition of particles as compared to the system without particles for apparently same viscosity. The superficial gas velocity at which transition from homogeneous bubbly to slug flow regime occurs is initiated by the addition of particles as compared to the particle free system for apparently same viscosity. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3079–3090, 2014     

焊装折边胶工艺在汽车制造中的应用

介绍了折边胶应用性能、涂布工艺、过程失效分析与措施预防等,并着重论述了折边胶工艺对车身强度和涂装PVC气泡问题的影响。