磷酸盐激光玻璃非激活吸收系数测量研究

介绍了高功率激光放大器系统中磷酸盐激光玻璃的静态透过率测量。在正常运行条件下,4片长按布儒斯特角放置的国产N31钕玻璃片对1.054um的激光波长平均静态透过率为94.5%,介质的损耗系数为0.294%cm-1,平均非激活吸收系数为0.146%cm-1。在此基础上对片状放大器的增益系数的测量结果进行了修正,获得了5.25%cm-1的小信号增益系数。     

钢板侵彻过载的三维数值模拟

利用LS—DYNA有限元程序，用弹塑性模型建立材料模型，对高速弹丸侵彻均质钢板问题进行了数值模拟，并与测试结果进行了比较，说明了有限元分析的有效性，为引信设计提供参考。     

QP19-L型PDC钻头在TK320井的应用

针对塔河地区的地层特点和PDC钻头的破岩机理，优选了适合于该地层钻进的QP19-L型PDC钻头，总结了PDC钻头的使用技术措施。在TK320井二开井段的应用表明，该钻头能明显提高机械钻速，缩短钻井周期，值得推广应用。     

模块化蓝光光存储性能静态测试系统

蓝光光存储是信息存储领域发展的一个重要方向。测试系统是研究蓝光光存储材料的必备条件，为建立蓝光光存储研究平台，设计和搭建了一套模块化蓝光光存储性能静态测试系统。激光工作波长为406．7nm。系统采用调制解调技术降低系统噪声，提高测量粘度：采用光点移动模式降低对样品尺寸的要求；采用纳米平台提高记录点的反复定位性能。实验结果证明测试系统性能良好，可以满足蓝光光存储性能静态测试要求。     

锥形凸台成形的一种叠加滑移线场力学模型

分析了锥形凸台在不同体积成形工艺中的成形机理，基于模块化思想将锥形凸台的成形过程划分为挤压成形与角部充满两个特征时段；将上述两个特征时段的滑移线场力学模型有机联结，构建了锥形凸台成形过程的一种叠加滑移线场力学模型；介绍了叠加滑移线场力学模型的应力场与变形力的求解方法。该模型丰富了金属体积成形过程的特征单元库，可套用于局部成形的应力场与变形力求解，实现局部成形的模具优化设计。     

烧结机双层插板式卸灰阀的研制

烧结机双层卸灰阀由蘑菇头式改为电液推杆插板式，有效地解决了系统卸料及漏风问题，实现了控制自动化，提高了设备作业率，改善了岗位环境。     

Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail injection system in a diesel engine

This paper investigates the effect of injection parameters on the characteristics of dimethyl ether (DME) as an alternative fuel in a diesel engine with experimental and analytical models based on empirical equations. In order to study macroscopic and microscopic characteristics of DME fuel, this work focuses on the atomization characteristics of DME and compares experimental and predicted results for spray development obtained by empirical models for diesel and DME fuel. Detailed comparisons of spray tip penetration from three different empirical correlations and from visualization experiments of diesel and DME fuels were conducted under various fuel injection conditions. In comparison with the results of different empirical equations for measured spray tip penetration, the experimental results of this study provide good agreement with the calculation results based on empirical equations, except during the earliest stage of the injected spray sequence. The results of atomization characteristics indicate that DME showed better spray characteristics than conventional diesel fuel. Also, the fuel injection delay and maximum injection rate of DME fuel are shorter and lower than those of diesel fuel at the same injection conditions, respectively.     

锅炉未焊透椭圆接管结构应力数值分析

应用有限元法对未焊透的椭圆接管结构进行了应力数值分析,并应用压力容器分析设计法,对该结构进行了疲劳分析,得出结构因未焊透缺陷导致疲劳破坏。     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

超高吨位灌注桩静载试验中的预应力混凝土反力装置

在复兴大桥超高吨位灌注桩的静载试验,预应力混凝土反力装置替代了传统的钢梁反力系统。这套装置主要包括预应力锚桩、预应力承台与预应力反力梁。试验结果表明,直接获得超高吨位大直径嵌岩桩的极限承载力相当不易,而对这类问题预应力混凝土反力装置是值得考虑的。