测量不确定度计算与实验方案的恰当选择

文章介绍了不确定度的定义及其一般计算公式，通过具体实例介绍了实验后不确定度的计算和实验前的误差估计。并对有多种可能的实验方案，利用误差估计的方法，选择出最佳的实验方案，使其不确定度最小。     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

Business programmes and information systems methodologies

Abstract. An Information Systems Methodology is usually presented as a sequential set of tasks — planning, analysis, design and construction — resulting in a new business application. This classical 'forward-engineering' approach must be adapted to changing business needs — business process redesign, quality management, process and systems templates, advanced technologies, application packages, the reuse of existing information systems resources, and rapid delivery cycles. Using the most general concept of a Business Programme, this paper describes a methodological approach incorporating these modern themes that is qualitatively and quantitatively different from the classical model. It provides a framework for the integration of otherwise independent methodologies, and shows how an entire programme can be formulated, planned and executed. An example is provided, and the approach is justified.     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

焦化防砂室内实验研究

油井防砂工艺技术的研究与发展对疏松砂岩油藏的正常开采至关重要.焦化防砂是通过向地层内注入热空气使原油在高温下发生氧化裂解生成焦炭从而将地层砂固结的一种防砂新技术.为了对该项技术进行全面系统的理论分析与评价,设计并制作了一套焦化防砂实验装置,利用该装置进行了焦化防砂室内实验研究.焦化效果以岩样的抗压强度进行评价,实验结果表明,影响焦化后岩样抗压强度的主要因素为空气最高温度、处理时间和空气流量.此外,对焦化处理后的岩样所作的岩样组成分析揭示出,稠油胶结机理为氧化作用使部分油分和胶质变成沥青质,沥青质受到高度的缩合作用而成为高分子量的甲苯不溶物.由于新生胶质的氧化比原生胶质的氧化困难得多,因此适合焦化防砂的油层,其原油必须含有一定量的原生胶质和沥青质.     

武钢四烧工程多目标优化方法烧结试验

采用二次回归正交设计进行烧结试验，获得了七个目标的数学模型，并验证了其可靠性，用多目标计算机选优法对四烧车间的工艺参数进行了选优。     

WQ—10型煤气平焰烧嘴的半工业性试验研究

对ＷＱ－１０型煤气平焰烧嘴进行半工业性试验，得到了该烧嘴较长时间运行下的一些性能。结果表明，该烧嘴平火焰稳定，炉顶温度分布均匀，燃烧烟气中ＣＯ、ＮＯ含量达到了ＹＢ／Ｔ０６２－９４标准的要求。     

烧结通用配料计算软件系统的开发

本文介绍了烧结通用配料计算软件系统的总体结构，软件的功能及其设计特点，该软件已在多个烧结经验中得到成功应用。