建筑供排水用聚丙烯管道(PP-R)特性简析

PP -R管道具有质轻、连接方便、良好耐热性和较小导热系数、耐腐蚀且管道阻力小等优点 ,属绿色产品 ,本文对施工过程中就PP -R管与混凝土的粘结不密、抗紫外性能差等问题提出了相应的处理措施     

PRO/Ⅱ软件在硫磺回收中的二次开发应用

硫磺回收装置的设备需要有较大的操作弹性。针对其过程气进口压力低，手工计算难于进行严格的全程压降计算，现以PRO／Ⅱ软件为开发平台，通过扩充数据库和建立模拟流程，成功地将其用于硫磺回收装置的设备选型和核算，为工程设计提供了先进的计算手段。     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

纳米SiO2粉体的制备与研究

纳米SiO2粉体的制备是以硅酸钠和盐酸为原料，添加适宜的稳定剂(非离子表面活性剂)和分散剂，在适宜的pH值和温度下，采用化学沉淀法合成。研究表明，要得到性能优良纳米的SiO2粉体，最佳工艺条件为：温度20～40℃，pH=6，反应液质量浓度P1=20g／L，P2=1．20g／L，反应时间15min。结果表明：制备的纳米SiO2粒径30～50nm，比表面积大，分散性好，质量优良，可达到产业化的生产。     

神华集团孙家沟选煤厂工艺流程及设备的评价

简述了孙家沟选煤厂工艺参数的选择和设计情况及投产后的运行效果,评价认为,该厂建设速度快,工艺流程合理,设备性能良好,产品质量合格、稳定。     

关于中压电缆网双环接线方式供电能力的分析

结合北京地区现阶段对相关技术的规定,以实际供用电方案为例,对中压电缆网双环接线方式的供电能力进行深入讨论。通过设计环网单元划分,发现某些条件下双环网供电能力可以得到进一步提升。     

电厂电气运行中常见故障分析及其应对措施探讨

为了保证电厂的生产效率,必须要分析电气的运行特征,确定电气故障发生的原因,综合考虑多方面因素,选择切实可行的措施解决问题。简要分析了电厂电气运行常见故障发生原因,并提出了相应的解决措施。     

锅炉水处理系统除氧器的研制

锅炉和循环水处理系统的氧腐蚀是各种腐蚀中最严重的一种。因此，对给水进行除氧处理应该是最有效的防止腐蚀的方法。本文针对新研制出的新型活性铁除氧剂，又研制出与之相配套的除氧设备。该设备具有理想的除氧效果，常温操作，结构简单，弥补了过去一些除氧设备的不足。     

动筛跳汰系统设计中若干环节的探讨

论述了动筛跳汰机的选型原则及技术要求,提出了4m2动筛跳汰机分选系统设计中各环节技术参数及所用设备的选择条件,同时对动筛跳汰系统各环节的布置进行了探讨。