影响薄壁球墨铸铁白口倾向和球墨数量的因素分析

研究了不同的冷却速度、稀土加入量、碳量、硅量、Si／C、Mn／S及孕育处理等工艺时薄壁球墨铸铁球墨数量和白口深度的影响。结果表明，随着冷却速率增加，薄壁球墨铸铁石墨小球越多，但容易产生白口。冷速较大时，加入稀土元素进行孕育和控制碳当量，可以有效的消除薄壁球墨铸铁的白口现象，当Si／C大于0．80、Mn／S大于20时薄壁件白口倾向较小。     

大断面蠕铁缸盖缩松原因分析及防治

对于大断面柴油机气缸盖,通过采用顶置发热冒口,并配合使用冷铁,能最大发挥冒口作用。对于大型单体气缸盖,可采用平组立浇方式,增强顺序凝固作用,进一步缩小缩松风险。     

钇基重稀土镁复合球化剂在铸态高韧性厚壁球铁件上的应用

应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。超过了用户要求和美国ＡＣ公司的标准。铸件中心部位铸态延伸率≥１７％，接近了铸件外层或附铸试块的水平。     

现代化小型型钢轧机建设的若干问题

本文阐述了实现小型型钢轧机连续化的重要性和迫切性，并指出了在建设小型连轧机中应重视的若干技术问题。     

钇基重稀土镁球化剂的应用研究

研究了钇基重稀土镁球化剂的组成，试验了钇基重稀土镁复合球化剂对抗球化衰退、抗石墨球畸变的作用。工厂试验结果表明，钇基重稀土镁球化剂具有脱硫、球化、抗球化衰退、抗石墨畸变能力强，细化基体组织、白口倾向小及提高厚大断面球铁本体力学性能的作用。     

Ni-Cr-Mo三元系1358 K等温截面的测定

应用三元扩散偶技术测定了Ni-Cr-Mo三元系1358 K的等温截面,借助电子探针微区成分分析方法分析了Ni-Cr-Mo三元扩散偶的相区成分,并对其相关系进行了研究.测得Ni-Cr-Mo三元扩散偶在1358 K下存在一个中间化合物NiMo,Cr和Mo在扩散偶中形成连续固溶体,Ni和（Cr,Mo）有限固溶,扩散偶中未发现三元中间化合物.实验发现Ni-Cr-Mo三元系1358 K的等温截面存在一个三相区：Ni＋NiMo＋（Cr,Mo）.     

简单断面孔型计算机绘图系统简介

介绍了简单断面孔型计算机绘图系统的编制方法、使用范围 ,计算机绘图的步骤及特点     

Numerical analysis of dimension precision of U-shaped aluminium profile rotary stretch bending

In order to enhance the dimension precision of bent part, advanced bending technologies is requested recently. Rotary stretch bending（RSB） is a suitable technology to realize high precision of bent part. The effect of processing parameters, namely the side pressure and the stretching force, on the dimension precision of aluminium profile RSB part was studied by finite element method. The numerical simulation of the U-shaped aluminium profile RSB was carried out, and the validity of the simulation was checked. Parametric analysis shows that the section distortion of the U-shaped profile LY 12M bent part decreases with the increasing of the side pressure, whereas the springback of curvature increases, and that both of the section distortion and the springback of curvature decrease with the increasing of the stretching force, moreover, the uniformity of curvature of the bent part is clearly enhanced with the increasing of the stretching force. The results above prove that RSB technology can better improve the dimension precision of aluminium profile bent part.     

Determination of isothermal section of Fe-Ti-Zr ternary system at 1173 K

Phase relations in the Fe-Ti-Zr ternary system at 1173 K were investigated by means of diffusion-triple approach together with electron probe microanalysis（EPMA） technique. A series of tie lines and tie-triangles were determined and the isothermal section at 1 173 K was established, which consists of four three-phase fields： β（Ti, Zr）＋FeZr2＋FeTi, FeZr2＋FeTi＋Fe2Zr, FeTi ＋Fe2Zr ＋Fe2Ti and Fe2Zr ＋Fe2Ti ＋Fe. The results show that the largest solubility of Ti in Fe2Zr is about 11.3 %（mole fraction） and the solid solubility of Ti in FeZr2 is about 26.9%, the solid solubility of Zr in Fe2Ti is about 8.1% and the solid solubility of Zr in FeTi is 7.2%. The binary compound FeZr2 is nearly a linear compound. No ternary compound is found.     

形变氮化08F钢冲击断口的分形研究

利用垂直截面法测量了０８Ｆ钢经不同形变氮化复合后冲击断裂表面的分形维数。结果表明，材料的冲击能Ａ和沿裂纹扩展方向剖面Ｋｏｃｈ曲线的分形维数Ｄ地均随表变量的增而增加。分形维维数Ｄ与ｌｎＡ之间呈正变化的关系，且满足下列关系式：ｌｎＡｋ＝４９．４３ＫＦ－５１．４４。