Full scale thermal testing of latent heat storage in wallboard

Full scale thermal storage tests were conducted in a room lined with PCM wallboard having latent heat storage capacity. The results were compared with those obtained from tests conducted in a similar room lined with ordinary wallboard. The research showed that PCM wallboard can function efficiently as a thermal storage medium which can be applied to peak load shifting, improved use of waste and solar heat as well as more efficient operation of heating and cooling equipment.     

大型储罐的罐壁设计

根据十万立方米浮顶油罐罐壁板应力测试的实测结果，运用应力分析程序，对罐壁板应力分布情况进行了分析和比较，通过调整罐壁板的厚度，使新设计储罐的罐壁板应力分布更加均匀、合理。     

关于供排水管网的水力计算和校核

以往对电站技术供排水系统大都未进行水力平差计算，致使一些实际电站的供排水系统达不到预期的效果，甚至影响机组的正常运行。据此，给出了供排水管网的平差计算方法，有利于正确评估电站管网，另外，提出了管网校核应注意的问题。     

光盘用光学头物镜性能的综合评估

论述了采用波象差均方根、点扩展函数、光学传递函数对高次旋转对称非球面光学头物镜性能进行综合评估的方法。作者在正则坐标理论基础〔１〕上编制了光学头物镜性能综合评估软件。给出了评估实例。     

淀粉液化液灭酶方法的研究

某些情况下淀粉液化液需要严格控制液化的程度 ,因此需要及时终止残余淀粉酶的活性。实验用降低液化液 pH值、升高温度、以及两者并用等 3种方法结束液化反应过程 ,实验结果可作为工业生产过程参考。     

Cognitive adaptation, psychological adjustment, and disease progression among angioplasty patents: 4 years later.

The long-term effects of the Cognitive Adaptation Theory Index (CATI) on psychological and physical health outcomes among men (n=199) and women (n=99) treated for coronary artery disease with percutaneous transluminal coronary angioplasty were examined. The CATI reflects a positive view of the self, a positive view of one's future, and a sense of personal control over daily life. This index was created from questionnaires administered during hospitalization for the initial angioplasty. Four years later, the CATI predicted positive adjustment to disease, even when initial adjustment was taken into consideration. In addition, the CATI predicted a reduced likelihood of sustaining a subsequent cardiac event over 4 yrs. This association was more robust for men. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.