Deformation of Rodlike Elements of Composite Materials Subjected to Uniform Compression

On the basis of generalization of the results of investigation of the operation of rodlike elements of composite materials, we make a conclusion that the influence of various factors on the deformability of these elements is studied incompletely. The comparison of the stress-strain states for different models of concrete and reinforced-concrete elements makes it possible to describe the effect of longitudinal reinforcement (coefficient of reinforcement, strength and deformation characteristics) on the critical level of strains in the cross section. According to the results of our investigations, we give recommendations concerning the evaluation of the critical value of the coefficient of reinforcement above which one may observe the effect of reinforcement on the deformability of the analyzed sections. It is shown that the compression strength of the brittle base of the composite with inhomogeneous structure decreases as a result of the fracture processes. It is also demonstrated that the existing procedure used for the evaluation of the indicated decrease in strength requires significant improvement. The problem of evaluation of the ultimate value of the coefficient of reinforcement is also analyzed.     

将紫外光谱用于溴指数测定方法的选择

对未知组成的样品进行紫外光谱扫描 ,根据扫描结果以及各种溴指数测定方法的适用范围 ,选择测定未知物溴指数的适宜方法 ,以提高测定准确度。     

Precision equipment for symmetrical bending— Part 1. The loading system

The design and performance of precision bending equipment for testing straight beams with constant rectangular section under a pure bending moment is described. Part 1 deals with the loading arrangements and Part 2 with the rig for measuring beam deflection. The methods for recording deflection of strain gauges applied on the beam have been described elsewhere.^1–4
The reactions to the deadweight gravity loads are taken via ball bearings. The total bending moment inaccuracy, i.e. the sum of estimated systematic errors and random errors, the latter expressed as the 2Ga confidence interval about the mean (2G_cim), is about ± 25 x. 10^-4%, for 23 tests with a steel beam with 15 mm × 75 mm cross sectional dimensions, loaded to 1-1.5 mm/m strain.
The measuring rig stands on the beam via hardened and polished spherical segment feet and uses a capacitive transducer system with less than 5nm resolution. Various application tasks are described. The total inaccuracy of the measured deflection, i.e. apart from bending moment inaccuracy, is about ± 35 times 10^4% for about 10 reproduced, not repeated, tests with the same steel beam. The deflection for such a beam is of the order of 2 to 4 mm.     

票据使用与结算改革的构想

以票据为主体的结算制度，是我国结算改革的重大突破，也是结算改革取得显著成绩的表现。根据票据的特征，对票据使用在我国的可能性和必要性进行分析，并结合我国结算改革中存在的一些问题，提出几点设想。     

基于MFQ的补丁优先算法的研究与实现

目前采用的视频流调度算法，没有充分利用补丁流满足服务率高而占用系统资源少的优势，系统效率较低．为了提高效率，提出了一种基于MFQ的补丁优先算法，并给出了该算法的系统流程。通过对实验结果的比较，该算法在用户请求撤销率、节目调度不公平性和用户等待时间方面有明显的优越性．     

Random errors caused by temperature in magnitude of principal strains evaluated ith 3-element strain gauge rosettes

The effects of the uncertainties associated ith the apparent strain and gauge factor data, given by the manufacturer, in the evaluation of principal strains are examined. Principal strains are obtained by a reduction of the strains measured ith electrical resistance strain gauge rectangular or delta rosettes. The theoretical analysis points out the relevance of the effects caused.     

三角函数型增长曲线预测油田开发指标

提出了用三角函数表示的一类用于油田开发指标预测的增长曲线共6条，从而进一步完善和丰富了现有的增长曲线法。提出和推导了它们的Np-t、Qt-t、Qt-Np关系式、（Np/NRmax)Qtmax准数计算式以及参数求解式。其特片研究表明，它们特征相近；（Np/NRamx)Qtmax变化范围为0-0.36785，属于峰值产量出现在油田开发初期的情况，其Qt-Np关系为一不对称的拱形曲线。提出了求取曲线参数的过原点重复线性回归法。双河油田的实例表明该方法有一定实用价值。     

碾压混凝土穿透型诱导缝不同扩展阶段的强度指标试验研究

在不同削弱度碾压混凝土轴拉试件的穿透型诱导缝周围粘贴了应变片，得到在不同应力状态下诱导缝应变发展规律为：在加载初期，离缝端不同距离的应变发展较为均匀，数值上相差不突出；随着荷载的增加，应变开始出现不均匀发展，离缝端越远，应变变化越缓慢；当接近最大荷载的阶段，缝端应变急速发展，试件瞬间断裂。应变从均匀发展变为不均匀发展，实质上隐含了诱导缝起裂、稳定发展、失稳断裂的整个过程，针对这一试验现象，结合断裂力学理论，建立了诱导缝不同开裂阶段的远场温度应力强度指标模型。     

Production and structural features of a water-soluble polysaccharide from a mutant strain of Agrobacterium sp.

We have developed a mutant strain derived from Agrobacterium sp. ATCC 31750, which produces a water-soluble polysaccharide having potential utility to the food, feed, pharmaceutical and cosmetic industries. A high concentration of product (15 g/L) is obtained by 48 h cultivation of the mutant strain under optimized fermentation conditions. The water-soluble polysaccharide obtained from cultures of the mutant strain beta82 has Glc:Man:Gal in approximate molar ratios of 5.8:6.7:1.0. The molecular weight of the polysaccharide was determined to be approximately 1000 kDa by HPSEC analysis. Linkage analysis contained 3-Glcp, 3-Manp, terminal Glcp and terminal Manp, as well as a small proportion of 3- and 3,4-Galp, and 4,6-Manp residues. Based on analyses using FT-IR and ¹³C NMR spectrometers, most glycosidic bonds joining these sugar residues are of the α-type, and acetyl groups are apparently attached to the polymer chain at random.     

Temperament in Childhood Predicts Body Mass in Adulthood: The Cardiovascular Risk in Young Finns Study.

This study examined associations of temperament at ages 6 to 12 with body-mass index (BMI) and waist circumference (WC) at ages 24 to 30 years. The participants were 619 men and women derived from the population-based Cardiovascular Risk in Young Finns Study. Temperament was operationalized as (negative) emotionality, sociability, and activity. High emotionality predicted increased BMI, independently of WC, and independently of childhood and adulthood risk factors for adult obesity. None of the temperament dimensions had any associations with WC after controlling for BMI. The findings suggest that temperamental difficulty in childhood may be a useful risk indicator for general body mass in adulthood, and the mechanisms relating temperament with body mass should be further explored. (PsycINFO Database Record (c) 2010 APA, all rights reserved)