黑龙江省新林—呼中地区水系沉积物地球化学特征及找矿意义

在新林—呼中地区森林沼泽-冻土景观区,开展1∶50 000水系沉积物测量,探讨该区水系沉积物中元素含量分布、元素组合特征和区域地球化学异常特征,为下一步划分成矿远景区,开展地球化学找矿提供依据。结果显示:该区具备中高温热液型Cu、Pb、Mo、Au多金属矿成矿条件;早白垩世二长花岗岩区和白音高老组火山岩区Cu、Pb、Zn、Mo、Au显著富集,强烈分异,是寻找Pb、Cu、Mo、Au多金属矿化(床)的有利地段;区域异常与燕山早期酸性侵入体密切相关,应是晚侏罗世—早白垩世岩浆侵入、喷发以及构造运动强烈作用的结果。     

Influence of blade deformation and yawed inflow on performance of a horizontal axis tidal stream turbine

For a better design of tidal stream turbines operated in off-design conditions, analyses considering the effects of blade deformation and yawed inflow conditions are necessary. The flow load causes deformation of the blade, and the deformation affects the turbine performance in return. Also, a yawed inflow influences the performance of the turbine. As a validation study, a computational fluid dynamics (CFD) simulation was carried out to predict the performance of a horizontal axis tidal stream turbine (HATST) with rigid blades. The numerical uncertainty for the turbine performance with blade deformation and a yawed inflow was evaluated using the concept of the grid convergence index (GCI). A fluid–structure interaction (FSI) analysis was carried out to estimate the performance of a turbine with flexible composite blades, with the results then compared to those of an analysis with rigid blades. The influence of yawed inflow conditions on the turbine performance was investigated and found to be important in relation to power predictions in the design stages.     

Structural,electronic, and magnetic properties of zigzag-edged BN nanoribbons with 558-type line defects

The 558-type line defect is introduced into zigzag-edged BN nanoribbons (ZBNNRs), similar to that be found in graphene, and the structural, electronic, and magnetic properties for such defective ZBNNRs are investigated systematically. It shows that they are highly stable. In the nonmagnetic state, the metallic property of ZBNNRs remains unchanged regardless of the defect positions, but different defect positions give rise to different influences on the total DOS and PDOS at the Fermi level. Interestingly, in the magnetic state, the thermal stability of magnetism is enhanced greatly when the line defect appears at most positions, even comparable with room temperature. When the line defect position shifts from the B-edge to the N-edge, the transition from the half-metal to the magnetic semiconductor or spin unpolarized semiconductor is induced. And also, the response of defect ribbons to an in-plane transverse electric field is essentially different from defect-free ribbons, and the half-metallic feature can be enhanced by an electric field for the line defect introduced into certain positions in a ribbon.     

Detection of Damaged Distribution Surge Arresters Using an Impulse Generator

Distribution surge arresters with an internal series gap have been installed on Japanese distribution lines at high density to reduce lightning‐related overvoltages. In contrast, surge arresters are sometimes damaged by direct lightning strokes, particularly in winter. Measurement of the insulation resistance between the terminals of the surge arrester and measurement of the dc discharge voltage of the surge arrester are generally adopted to detect damaged arresters. However, if metal‐oxide (MO) varistors are damaged and the internal series gap is not damaged, it is difficult to detect damaged arresters by the two conventional methods. Therefore, this paper presents a proposed detection method that can accurately detect damaged arresters. In the proposed method, first, the voltage between the terminals of the surge arrester is measured when the output of an impulse generator is applied to the surge arrester. Second, the damaged arrester is detected by comparison between its voltage waveform and the voltage waveform of the nondamaged arrester. The detection rate of damaged arresters by the proposed method is markedly higher than the rates of detection by the two conventional methods.     

再析纺纱时钢丝圈在钢领上位置倾侧

进一步叙述在离心力分量FMy不略去时钢丝圈平面空间位置,它在坐标平面x'Ay'上迹线u的倾角κ0,并且∠κ=∠δ;经实例计算,钢丝圈平面的位置角δ较小。但已说明了纺纱时钢丝圈外脚超前。钢丝圈平面在坐标平面y'Az'上迹线w的倾角χ表明它呈整体前倾,导致钢丝圈纱线通道高度减小。分析钢丝圈上纱作用点J的坐标比q/s得出,质心高度低、圈形小的钢丝圈前倾大,纱线通道小。至于钢丝圈外倾角τ,它是钢丝圈几何图形在坐标平面x'Az'上投影对于轴Az'形成的,可直接从动态图上测量得。指出:纺纱时钢丝圈外倾是不可避免的,其质心坐标c应由气圈纱张力及形状确定之;按τ和c/a算出的τ0v将是角τ0的最小值;角τ0可从钢丝圈和钢领呈弧面接触,钢丝圈下腿圆弧半径须为r1的条件确定;掌握"圈径"概念对钢丝圈和钢领设计和使用非常有利,应注意圈径长度A0M0≌AMv,每只钢丝圈都有属于自己的圈径A0M0,其斜度和长度已被确定而成为技术特征数。     

An incremental intrusion detection system using a new semi‐supervised stream classification method

In recent years, the utilization of machine learning and data mining techniques for intrusion detection has received great attention by both security research communities and intrusion detection system (IDS) developers. In intrusion detection, the most important constraints are the imbalanced class distribution, the scarcity of the labeled data, and the massive amounts of network flows. Moreover, because of the dynamic nature of the network flows, applying static learned models degrades the detection performance significantly over time. In this article, we propose a new semi‐supervised stream classification method for intrusion detection, which is capable of incremental updating using limited labeled data. The proposed method, called the incremental semi‐supervised flow network‐based IDS (ISF‐NIDS), relies on an incremental mixed‐data clustering, a new supervised cluster adjustment method, and an instance‐based learning. The ISF‐NIDS operates in real time and learns new intrusions quickly using limited storage and processing power. The experimental results on the KDD99, Moore, and Sperotto benchmark datasets indicate the superiority of the proposed method compared with the existing state‐of‐the‐art incremental IDSs.     

2020加强型数控角钢线的技术水平及特点分析

本文通过对2020加强型数控角钢线的技术水平及特点分析,介绍了锻压产品中该系列产品发展趋势,同时对其取代国外同类产品,创造社会效益和经济效益的期待。     

(F,K, b)-vex sets and some related properties

In this paper, we introduce the concept of (F, K, b)-vex sets in vector spaces which is a generalization of (E-b)-vex sets given by Mishra, Mohapatra and Youness. Some properties of (F, K, b)-vex sets are investigated.     

How to design effective priority rules: Example of simple assembly line balancing

Priority rule-based methods (PRBMs) rely on problem-specific knowledge to construct good solutions in a very short time. They can be used as stand-alone procedures or can be integrated into (partial) enumeration procedures, like branch and bound or dynamic programming, and heuristic solution methods. PRBMs are especially important for solving NP-hard optimization problems.In this paper, we formulate general design principles on how to construct good-performing PRBMs, based on a thorough computational investigation. Our principles allow to construct effective PRBMs already ad hoc, i.e. without time-consuming data mining algorithms. We conduct our analysis on the example of the NP-hard Simple Assembly Line Balancing Problem (SALBP), on which with small modifications most situations in the planning of assembly lines are based. We also provide a cross-validation of our results and illustrate the application of the formulated principles.