穿壁焊极柱合金探索

本文对起动用铅酸蓄电池穿壁焊极柱用合金配方进行了探索 ,并得到了良好的应用效果     

脆断事故的原因分析和预防措施

分析高强度材料和大型工程结构元件发生低应力脆性断裂的原因及条件，指出传统强度设计理论的局限性，从设计和工艺上提出防止发生低应力脆断事故的具体措施，给使用高强度材料和设计大型工程结构元件时提供参考。     

25mm厚钢板产生层间撕裂的原因和防治

层间撕裂并非是厚板独有的质量问题 ,结合工程实例 ,分析 2 5mm厚低合金钢板产生层间撕裂的原因。通过对钢材的超声波探伤检测、化学成分分析和Z向性能检测 ,指出层间撕裂主要与节点设计不当和钢材内非金属夹杂物偏析、分层有关 ,并提出了预防措施。对产生裂纹的构件视严重情况提出了不同的修补处理方法     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Schäden durch kerbinduzierte Schwingbrüche

Failures by notch induced fatigue fractures Notches produce local stress concentrations and promote the formation of fatigue cracks. Characteristic types of notches as a result of design, manufacturing and operation are presented and remedial measures are discussed. Examples demonstrate the effect of different kinds of notches on various components.     

Early impact of a fat-enriched diet on behavioral responses of male and female rats.

Prolonged high-fat diets have been shown to affect an organism's stress responsiveness at the neuroendocrine level. In the present study, the authors used a 7-day protocol of fat administration in adult rats of both sexes to investigate the early behavioral impact of a moderately fat (20%) diet, often used by Western societies, on rats' reaction to acute stress and novelty. Their results show that this diet can reduce the rats' active behavioral responses to subsequent stressors and influence their corticosterone secretion. Fat-fed male rats adopted a less active behavior to cope with forced swimming stress, whereas their exploratory behavior in the open field environment was rather increased compared with chow-fed males. Fat-fed female rats exhibited a less active behavioral response to both stress paradigms compared with their chow-fed counterparts. Fat diet abolished facilitation in corticosterone secretion following a subsequent stressor in both sexes. However, only in males did fat diet exaggerate corticosterone response to novelty, irrespective of the previous stress history of the rat. These data indicate that a short-term metabolic stress can modify the rats' stress coping strategy in interaction with the gender. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A note on stress-constrained truss topology optimization

The purpose of this brief note is to demonstrate that general-purpose optimization methods and codes should not be discarded when dealing with stress-constrained truss topology optimization. By using a disaggregated formulation of the considered problem, such methods may find also “singular optima”, without using perturbation techniques like the ε-relaxed approach. Received February 19, 2002     

On integral equation approaches to the mechanics of fibre-crack interaction

The paper examines the problem of a penny-shaped crack which is formed by the development of a crack in both the fibre and the matrix of a composite consisting of an isolated elastic fibre located in an elastic matrix of infinite extent. The composite region is subjected to a uniform strain field in the direction of the fibre. The paper presents two integral-equation based approaches for the analysis of the problem. The first approach considers the formulation of the complete integral equations governing the associated elasticity problem for a two material region. The second approach considers the boundary integral equation formulation of the problem. Both methods entail the numerical solution of the governing integral equations. The solutions to these integral equations are used to evaluate the stress intensity factor at the boundary of the penny-shaped crack.     

Thermomechanical stress fields in high-temperature fibrous composites. I: Unidirectional laminates

This two-part paper presents a closed-form procedure for evaluation of estimates of local thermomechanical stress fields in two-phase fibrous composites and laminates. The first part is concerned with a unidirectional elastic laminate subjected to uniform mechanical loads and to uniform changes in temperature. Both phases are assumed to be elastic, with temperature-dependent moduli and expansion coefficients; the solution reflects the influence of thermomechanical interactions. Exact solutions are not possible for any real system, because the local geometry is not known in detail. Instead, estimates of the fields are found from a modified Mori-Tanaka approximation. Examples are presented for two SiC/Ti---Al---Nb composites. Local stresses of interest are found after cooling from fabrication to room temperature. The presence of local yielding, and the influence of coupling terms on the local stress magnitudes are examined. Extension of the results to laminated plates is presented in Part II (Dvorak, G.J., Chen, T. & Teply, J., Composites Science and Technology, 43 (1992) 359–368, this issue).     

局部缺陷对旋转壳内力分布的影响

本文应用有初始几何缺陷的壳体非线性应变分量公式及内时本构理论，对冷却塔在重力作用下的内力进行了弹塑性大变形计算，分析了常见的几种缺陷对冷却塔内力分布的影响。对于工程实际中有缺陷的冷却塔的整体性能分析具有重要意义，可以为工程设计提供理论基础。