浅谈氯碱氢的一种深度脱水工艺

概述了氢的主要工业生产方法和实际应用,详细介绍了氯碱氢三级脱水工艺过程,并运用在线分析手段,准确显示了干燥过程中的氯碱氢水分含量变化规律。     

Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites

This paper addresses the nonlinear stress-strain response in glass fibre non-crimp fabric reinforced vinylester composite laminates subjected to in-plane tensile loading. The nonlinearity is shown to be a combination of brittle and plastic failure. It is argued that the shift from plastic to brittle behaviour in the vinylester is caused by the state of stress triaxiality caused by the interaction between fibre and vinylester. A model combining damage and plasticity is calibrated and evaluated using data from extensive experimental testing. The onset of damage is predicted using the Puck failure criterion, and the evolution of damage is calibrated from the observed softening in plies loaded in transverse tension. Shear loading beyond linear elastic response is observed to result in irreversible strains. A yield criterion is implemented for shear deformation. A strain hardening law is fitted to the stress-strain response observed in shear loaded plies. Experimental results from a selection of laminates with different layups are used to verify the numerical models. A complete set of model parameters for predicting elastic behaviour, strength and post failure softening is presented for glass fibre non-crimped fabric reinforced vinylester. The predicted behaviour from using these model parameters are shown to be in good agreement with experimental results.     

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

An equiatomic CoCrFeNiMn high-entropy alloy was synthesized by mechanical alloying (MA) and spark plasma sintering (SPS). During MA, a solid solution with refined microstructure of 10 nm which consists of a FCC phase and a BCC phase was formed. After SPS consolidation, only one FCC phase can be detected in the HEA bulks. The as-sintered bulks exhibit high compressive strength of 1987 MPa. An interesting magnetic transition associated with the structure coarsening and phase transformation was observed during SPS process.     

Inverted pendulum stabilization: Characterization of codimension-three triple zero bifurcation via multiple delayed proportional gains

The paper considers the problem of stabilization of systems possessing a multiple zero eigenvalue at the origin. The controller that we propose, uses multiple delayed measurements instead of derivative terms. Doing so, we increase the performances of the closed loop in presence of system uncertainties and/or noisy measurements. The problem formulation and the analysis is presented through a classical engineering problem which is the stabilization of an inverted pendulum on a cart moving horizontally. On one hand, we perform a nonlinear analysis of the center dynamics described by a three dimensional system of ordinary differential equations with a codimension-three triple zero bifurcation. On the other hand, we present the complementary stability analysis of the corresponding linear time invariant system with two delays describing the behavior around the equilibrium. The aim of this analysis is to characterize the possible local bifurcations. Finally, the proposed control scheme is numerically illustrated and discussed.     

A web-based software tool for participatory optimization of conservation practices in watersheds

WRESTORE (Watershed Restoration Using Spatio-Temporal Optimization of Resources) is a web-based, participatory planning tool that can be used to engage with watershed stakeholder communities, and involve them in using science-based, human-guided, interactive simulation–optimization methods for designing potential conservation practices on their landscape. The underlying optimization algorithms, process simulation models, and interfaces allow users to not only spatially optimize the locations and types of new conservation practices based on quantifiable goals estimated by the dynamic simulation models, but also to include their personal subjective and/or unquantifiable criteria in the location and design of these practices. In this paper, we describe the software, interfaces, and architecture of WRESTORE, provide scenarios for implementing the WRESTORE tool in a watershed community's planning process, and discuss considerations for future developments.     

Symptoms and risks for musculoskeletal disorders among male and female footwear industry workers

BackgroundConsidering the growing participation of woman in the labor market and the high prevalence of the musculoskeletal disorders (MSD) in the footwear industry workers, the aim of this study was to evaluate and compare female and male footwear industry workers in relation to their demographics, occupational characteristics, stress levels, MSD symptoms prevalence, physical activity levels, alcohol and tobacco use.MethodsThe study included 175 female and 182 male footwear industry workers. Data was collected using the Perceived Stress Scale – 10, the Standardized Nordic Questionnaire, the International Physical Activity Questionnaire, the Alcohol Use Disorders Identification Test, and the Fagerstrom test for Nicotine Dependence.ResultsThe female workers were younger, had less time in the company and in the current job. They reported more stress (p = 0.001), had less time for physical activity (p = 0.004), higher prevalence of MSD symptoms in the last 12 months (p = 0.003), and consumed less alcohol (p = 0.006) than the male workers.ConclusionsFemale and male footwear industry workers presented significant differences in their demographics, occupational characteristics, stress levels, MSD prevalence, physical activity levels, alcohol and tobacco use. These differences should be taken into consideration in the implementation of intervention programs for optimum outcomes.Relevance to industryFemale footwear industry workers were more stressed, presented higher prevalence of MSD symptoms, and reported less time for physical activity than male footwear industry workers. The differences between male and female workers should be taken into consideration in the implementation of MSD prevention programs.     

Back-analysis of geotechnical parameters on PVD-improved ground in the Mekong Delta

This study presents a back-analysis of geotechnical parameters on prefabricated vertical drain improved ground at a site in the Mekong Delta. Various time?settlement behaviors that reflected different clay thicknesses and loading patterns were observed. The total surface settlement behavior at several monitoring locations was simulated using an updated exponential method that considered staged construction. The analyzed results were validated by substituting the values into a theoretical solution for radial consolidation. The estimated theoretical behaviors were comparable with the monitored behaviors. The geotechnical parameters were back-analyzed by applying the previously analyzed results to various theoretical and empirical formulas. However, the use of extensometer data that were installed at large intervals produced different values of the geotechnical properties. Furthermore, finite element analysis supported the back-analyzed total settlement behaviors and nearly disregarded the application of the geotechnical properties that were obtained using either surface or subsurface settlement data. However, settlements and excess pore pressures in the sublayers were not successfully predicted even when the geotechnical properties were adjusted. Thus, subsurface instruments that can be installed closely in thick clay deposits are required to reliably reevaluate the variations in geotechnical properties along a certain depth.     

Superior foetal electrocardiogram signal elicitation using a novel artificial intelligent Bayesian methodology

Innumerable casualties due to intrauterine hypoxia are a major worry during prenatal phase besides advanced patient monitoring with latest science and technology. Hence, the analysis of foetal electrocardiogram (fECG) signals is very vital in order to evaluate the foetal heart status for timely recognition of cardiac abnormalities. Regrettably, the latest technology in the cutting edge field of biomedical signal processing does not seem to yield the desired quality of fECG signals required by physicians, which is the major cause for the pathetic condition. The focus of this work is to extort non-invasive fECG signal with highest possible quality with a motive to support physicians in utilizing the methodology for the latest intrapartum monitoring technique called STAN (ST analysis) for forecasting intrapartum foetal hypoxia. However, the critical quandary is that the non-invasive fECG signals recorded from the maternal abdomen are affected by several interferences like power line interference, baseline drift interference, electrode motion interference, muscle movement interference and the maternal electrocardiogram (mECG) being the dominant interference. A novel hybrid methodology called BANFIS (Bayesian adaptive neuro fuzzy inference system) is proposed. The BANFIS includes a Bayesian filter and an adaptive neuro fuzzy filter for mECG elimination and non-linear artefacts removal to yield high quality fECG signal. Kalman filtering frame work has been utilized to estimate the nonlinear transformed mECG component in the abdominal electrocardiogram (aECG). The adaptive neuro fuzzy filter is employed to discover the nonlinearity of the nonlinear transformed version of mECG and to align the estimated mECG signal with the maternal component in the aECG signal for annulment. The outcomes of the investigation by the proposed BANFIS system proved valuable for STAN system for efficient prediction of foetal hypoxia.     

Effect of the cultivation mode on red pigments production from Monascus ruber

In submerged cultures performed in chemically defined fermentation medium containing glucose and glutamate, the growth and production of water‐soluble red pigments and citrinin by the filamentous fungus Monascus ruber were studied under various carbon/nitrogen (C/N) ratios. The specific production of the red pigments was optimal at a glucose/glutamate ratio of about 10 and then steadily decreased at higher C/N ratio. In contrast, the production of the mycotoxin increased with increased C/N with an optimum in the range of 30–45. In a fed‐batch mode, it was also found that the production of pigments was not favoured in fed‐batch mode by feeding the medium with glucose while keeping the C/N ratio lower than 10. This low production likely resulted from concurrent high accumulation of L‐malic acid that was reported to inhibit this production. In contrast, this mode of cultivation was rather favourable for the production of the mycotoxin.     

Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams

The neutral axis depth is considered the best parameter for quantifying the moment redistribution in continuous concrete beams, as exemplified in various design codes worldwide. It is therefore important to well understand the variation of neutral axis depth against moment redistribution. This paper describes a theoretical investigation into the neutral axis depth and moment redistribution in concrete beams reinforced with fibre reinforced polymer (FRP) and steel bars. A finite element model has been developed. The model predictions are in favourable agreement with experimental results. Three types of reinforcement are considered, namely, glass fibre, carbon fibre and steel. Various levels of reinforcement ratio are used for a parametric evaluation. The results indicate that FRP reinforced concrete continuous beams exhibit significantly different response characteristics regarding the moment redistribution and variation of neutral axis depth from those of steel reinforced ones. In addition, it is found that the code recommendations are generally unsafe for calculating the permissible moment redistribution in FRP reinforced concrete beams, but the neglect of redistribution in such beams may be overconservative.