读者决策采购（PDA）成功实施的关键性因素分析

读者决策采购作为一种全新的基于读者需求的资源建设模式,目前国内还没有高校图书馆实施。介绍了读者决策采购面临的问题,提出PDA要在我国高校图书馆成功实施,需制定严格的标准、选择合适书商并及时进行跟踪与评价。     

Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens

Wire-arc-sprayed nickel-aluminum is widely used in the aircraft industry for dimensional restoration of worn parts and as a bond coat for thermal barrier coatings and other top coats. Some repair applications require thick coatings, which often result in lower bond strength. A mechanism being investigated to ex-plain this decrease in bond strength is the free edge effect, which includes both coating residual stresses and coating thickness. The layer-removal method was used to determine experimentally the residual stresses in wire-arc-sprayed nickel-aluminum coatings of different thicknesses. Bond strength evalu-ations were performed using an improved ASTM C 633-79 test specimen. Finite-element analysis and fracture mechanics were used to investigate the effects of coating thickness and residual stress state on coating bond strength.     

岸吊焊缝裂纹分析与改进措施研究

从材料的焊接性能、焊接结构、焊条、预热与焊后热处理、焊接工艺参数等角度对岸吊胎架焊缝裂纹进行了分析,提出了改进措施,取得了良好的效果。     

Experimental Study of Microstructure Evolution during Tempering of Quenched Steel and Its Application

LARGE-SIZED FORGINGS are usually intensivelyquenched to obtain the desired microstructuredistribution,high strength and hardness.Becauseresidual stresses are high in quenched large-sizedforgings,tempering processes follow quenchingprocesses to reduce the residual stress and obtain goodmechanical properties.Several differentmicrostructures are generated in quenched steelforgings,such as martensite,bainite and retainedaustenite.Modeling of microstructure evolution inquenched steel during …     

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

Social network,social trust and shared goals in organizational knowledge sharing

The aim of our study was to further develop an understanding of social capital in organizational-knowledge-sharing. We first developed a measurement tool and then a theoretical framework in which three social capital factors (social network, social trust, and shared goals) were combined with the theory of reasoned action; their relationships were then examined using confirmatory factoring analysis. We then surveyed of 190 managers from Hong Kong firms, we confirm that a social network and shared goals significantly contributed to a person's volition to share knowledge, and directly contributed to the perceived social pressure of the organization. The social trust has however showed no direct effect on the attitude and subjective norm of sharing knowledge.     

时间序列季节调整方法在中国的发展:PBC版X-12-ARIMA

中国人民银行(PBc)版X-12-ARIMA软件是基于中国特点而定制的时间序列季节调整软件.通过总结时间序列季节调整方法的特点以及相应软件在国外的发展,针对我国应用的特点,尤其是春节因素的考虑,在解剖X-12-ARIMA方法原理的基础上,在春节因素计算方法、软件应用界面以及用户使用帮助等3个主要方面加以改进,具有数据导入、调整设置文件、运行方式以及结果输出4方面的特色.     

基于元胞自动机的股票价格宏观变化的研究

为了研究股票价格在宏观上的变化趋势以及产生这些变化的主要因素.提出了一种新的基于元胞自动机的模型分析股票价格宏观变化,构建了新的股票价格变化规则以及新的股票交易量的变化模型,假设了两大类影响股票价格宏观变化趋势的肉素,同时也细化了股票交易量的函数.模拟了当影响因素都利好,影响因素都利空以及影响因素利好利空交替出现的情况下,股票价格在宏观上的变化情况.仿真结果在一定程度上模拟了股票价格的宏观变化情况和股票价格变化的波动壤集性,说明了假设的两大类因素的合理性以及演化模型的正确性.