组织协同进化分类算法用于雷达目标一维像识别

针对雷达目标一维像识别问题，提出了一种基于组织协同进化分类算法的识别方法．该方法与现有进化分类方法的不同之处在于它的进化操作直接作用于样本而不是规则，采用了一种自下而上的搜索机制，即先使若干样本的集合得到进化，再从进化结果中提取规则．这样有利于避免在进化过程中产生无意义的规则．该方法不需要进行特征提取；对于高维数据，不需要预先进行降维处理；没有复杂的运算，训练和识别的速度都很快．对3种飞机微波暗室实测数据的识别实验表明，该方法性能稳定，优于基于支撑矢量机与子波核函数的方法，识别率均达到了96％以上．实验中还对算法的抗噪能力进行了测试，获得了良好的效果．     

长庆油田苏平1井固井技术研究与应用

苏平l井完井方式运用了技术套管一次上返、悬挂尾管和筛管技术。该井技术套管段井眼大、裸眼段长，加上大斜度、小间隙的尾管段．对水泥浆体系的性能要求较高。总结分析了长庆天然气水平井苏平l井的固井技术问题，介绍了苏平l井的井身结构与地层性质。通过研究．确定采用低失水GSJ水泥浆体系。该体系成功地应用在三次工程建井过程中，解决了长裸眼、大灰量、大斜度、尾管小间隙等固井技术问题。固井质量达到工程要求。     

坨五站中间乳化层快速增长原因及治理方案

胜利采油厂坨五站高含水(95％)原油化学预脱水中，二级沉降罐内油水相之间的中间乳化层增长迅速，引起了一系列问题。现场调查和大量室内测试结果表明，产生这一现象的原因有：油溶性破乳剂WD-1加入点不合理。有2／3的含水原油在通过油水分离器之后才与破乳剂混合；二级沉降罐进油口伸入油相内，油流的冲击达不到中间层；WD-1对坨五站混合原油中的稠油破乳脱水性能欠佳，不能适应坨五站混合原油组成和含水的变化。针对上述各种原因筛选出了性能更好的一种破乳剂1916。根据确定的几种原因采取了相应的措施：将破乳剂加入点改在3个并联油水分离器之前；将二级沉降罐的进油口移到水相内；改用筛选出的破乳剂1916，结果使中间乳化层的增长受到了抑制。图2表4参2。     

基于PLC的焦炉集气管压力专家控制系统

通过对焦炉煤气集气管压力系统的分析研究，提出基于专家系统的集气管压力协调控制方案，使得系统在传统PID控制的基础上，能够按照系统实际运行状况智能选择控制策略。全部系统基于西门子S7系列PLC构成，并采用PROFIBUS电缆组成总线型网络。     

Cryptography and cryptographic protocols

We survey the paradigms, approaches and techniques used to conceptualize, define and provide solutions to natural cryptographic problems. We start by presenting some of the central tools (e.g., computational difficulty, pseudorandomness, and zero-knowledge proofs), and next turn to the treatment of encryption and signature schemes. We conclude with an extensive treatment of secure cryptographic protocols both when executed in a stand-alone manner and when many sessions of various protocols are concurrently executed and controlled by an adversary. The survey is intended for researchers in distributed computing, and assumes no prior familiarity with cryptography.Received: June 2001, Accepted: July 2002,     

论社区服务产业化

社区经济作为一种优化的资源配置方式，利用社区服务为载体，将社区内互不相联的各种经济成份变为利益共同体，建立一种新的经济生产方式，从而带动社区乃至更广区域的经济发展。     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

选煤厂洗水闭路循环改造及效果

根据生产实际中洗水不能闭路循环的问题 ,因地制宜进行改造和加强管理 ,实现洗水闭路循环。     

Heat transfer mechanism of a swirling impinging jet in a stagnation region

Heat transfer characteristics of a swirling impinging jet have been experimentally examined using a combined particle image velocimetry (PIV) and laser‐induced fluorescence (LIF) technique for simultaneous measurement of velocity and temperature fields. The present study shows that the radial width of the jet stretches with increasing swirl intensity, and that the stretching phenomenon contributes to the maximum local heat transfer coefficient. At the stagnation region, the flow near the heated surface is mixed intermittently by reverse flows toward upstream, and spatial distributions of temperature are correlated with instantaneous velocity vector maps. The dynamic behavior of recirculation zones, attributed to swirl number Sw and impinging distance, mainly determines the turbulent heat transfer at the stagnation region. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 663–673, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10120     

初春施工技术要点探讨

论述了初春施工这个特定的施工季节所具有的特征，从气候、施工人员、工程情况及受冻土体等方面对初春施工易出现的问题进行了分析，对施工过程及施工技术规律性问题做了细化性研究和探讨。