Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

初论带状光纤缆结构设计

推导出了成叠带状光纤在松套管中余长的两个计算公式，此两公式是带状光纤缆结构设计需要用到的基本公式。此外，还对带状光纤缆结构设计作了初步讨论。     

玻璃包装改进及经济效益分析

论述了平板玻璃包装技术改进对提高包装质量和企业经济效益的影响,介绍了平板玻璃包装箱(架)的性能,简述了计算机辅助设计及计算机辅助管理在玻璃包装结构设计及包装质量管理中的效用。     

对遂昌金矿采场结构参数的探讨

对于遂昌金矿合理的采场结构参数，目前没有理想的确定方法。本文联系上盘围岩的构造裂隙，矿房的支护形式等提出采场稳定跨度判断指标。经４０个采场的检验，值信度达９７．５％。     

结构粘结剂的试验研究

粘结剂是粘钢加固技术的关键材料,通过对粘结剂的试验研究,得到了粘结剂的拉压试验曲线与材料力学指标以及粘附于各种标号混凝土时,粘结层的抗剪强度;并且还进行了粘结剂的短期流变试验。     

可调链式切皂机的结构设计

阐述了可调链式切皂机的设计思想、工作原理、结构特点、机械特性及设计注意事项。     

一种实用的新型双转动单螺杆泵

针对目前单螺杆泵使用中存在的转速低、振动大和离心力大等局限性,研制了一种实用的新型双转动单螺杆泵。这种泵结构简单,省掉了减速机构和万向装置,实现了内、外转子同方向高速平稳转动。该泵有4大特点:(1)把现有螺杆泵转子的滚动+绕偏心距摆动的复杂运动简化成绕其中心的纯转动,故噪声小,振动小,离心力小;(2)内、外转子是纯转动,无摆动现象,故动力轴和螺杆之间无需万向装置,内、外转子可制成全金属型,耐温达200℃以上;(3)无需减速机构,电动机可直接与内、外转子对接,使螺杆泵转速由400r/min提高到3500r/min;(4)外转子可以模块化加工。     

Stability Criteria of Underground Workings under Zonal Disintegration of Rocks

Using the energy approach as the base, the criteria are developed for brittle rock failure in outcropping in the workings driven in the rock masses of different degree of disturbance. A method is presented for estimating the stability of workings under conditions of zonal disintegration.     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

Effect of oxygen flow rate on the structural and electrochemical properties of lithium nickel oxides synthesized by the sol–gel method

The structural and electrochemical properties of LiNiO₂ powders were investigated as a function of the oxygen flow rate employed in the preparation of lithium nickel oxide. It was found that oxygen played an important role in the synthesis of highly crystallized LiNiO₂(R3¯m). In the crystallization process of LiNiO₂, a deficiency of oxygen in the calcination reactor induced the formation of impurities and cubic rock-salt structure (Fm3m) in LiNiO₂ powders. For LiNiO₂ prepared at higher oxygen flow rates, the electrode delivered high discharge capacities with relatively good retention rates. But very low electrode capacity was obtained from LiNiO₂ prepared at lower oxygen flow rates.