A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.     

降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度破损的措施

为了降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度的破损,对气体悬浮焙烧炉焙烧过程中氧化铝粒度的影响因素进行了分析,提出了降低粒度破损的一些措施。     

HCMOS器件γ辐射损伤电路分析

本文对最基本的HCMOS器件(反相器和与非门)作了γ辐射损伤实验。通过器件性能变化,分析了γ辐射对电路的作用。     

Hemispheric contributions to nonverbal abstract reasoning and problem solving.

Hemispheric involvement in reasoning abilities has been debated for some time, and it remains unclear whether the right hemisphere's involvement in problem solving is modality specific or dependent on the type of spatial reasoning required. In the current study, 2 types of nonverbal reasoning abilities were examined, spatial reasoning and proportional reasoning, in 109 patients with cerebrovascular disease that was confined to either the right or the left hemisphere or was diffuse in nature. Results indicated that no lateralizing effects were present based on type of spatial reasoning. Findings are consistent with the suggestion that higher order cognitive processes involved in nonverbal abstraction and problem solving are not strongly lateralized to the right hemisphere but rather are more generally distributed throughout the cortex. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

应用在地下工程施工中的新技术（Ⅱ）

为有效保护地面上的生态环境，开发利用地下空间资源并营建新世纪的地下水城，在新的21世纪里将会建造更多的地下工程以满足人们生产生活的各种需要。文中介绍了地下工程施工中采用的逆作法、盾构法、新奥法、沉管隧道、顶管工程和大型沉井施工新技术，供同行们参考应用。     

在役加氢反应器试验板脆化和氢损伤的测定与研究

充分利用了带主焊缝的役后试板，在国内首次开展回火脆化、氢介质下断裂韧性与疲劳扩展的研究，结果表明，加氢反应器焊缝有明显的脆化表现。同时，核查了反应器开停车升温速度和降温速度规定，以及确定了裂纹允许尺寸的参考数据，为今后安全运行提供了充分的依据。     

Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

底敞口充气浮箱研究和试验

提出底敞口充气浮箱的结构和概念。经模型模拟试验研究分析，经典浮力定律可用于这种浮箱的浮力计算；其动充气状况还具有一定的允许伤损面积。它的研究将为水陆两用车辆增大浮力，缩小外形，提高水上自下而上能力和潜驶潜伏提供具有诱惑力的工程应用前景。     

钼顶头破坏行为及强韧化分析

通过对钼顶头破坏行为的分析，说明了钼顶头破坏的主要原因。并进一步通过对钼顶头强韧化的分析，阐述了钼顶头延长使用寿命的措施，并制定了钼顶头生产工艺。     

硅片和硅器件工艺中的背面损伤吸除技术

本文介绍了硅片背面的三种主要损伤吸除技术：机械损伤、激光辐照和离子注入技术。对这三种吸除技术的机理、工艺条件、应用情况和近来进展，作了详细的评述。