等离子体抛光对表面粗糙度的影响

为了得到超光滑表面且无表层损伤的光学元件,引入一种新型的超光滑表面加工技术——等离子体抛光.在新设计的等离子加工实验平台上进行了等离子体加工工艺实验,对氧气流量,放电功率大小,磁场大小几个参数对基片表面粗糙度的影响进行了实验研究,且优化了工艺参数.结果表明增加氧气流量,合理控制功率和磁场强度都会使等离子体抛光基片表面粗糙度减小.当氧气流量为50 sccm,功率为80 W,磁场强度为17 mT时,粗糙度达到最小值0.9 nm.     

多维超几何分布的最可能成功数

超几何分布是一种重要的离散型概率分布,本文利用反证法以及比较法求出了三维超几何分布的最可能成功次数,并在此基础上,求出了多维超几何分布的最可能成功次数.     

Fissure evolution and evaluation of pressure-relief gas drainage in the exploitation of super-remote protected seams

Based on nonlinearity contact theory and the geological structure of the Xieqiao Coal Mine in the newly developed Huainan coal field, rock movements, mining fissures and deformation of overlying strata were simulated by using the interface unit of FLAC3D to evaluate the pressure-relief gas drainage in the exploitation of super-remote protected seams. The simulation indicates that the height of the water flowing fractured zone is 54 m in the overlying strata above the protective layer. The maximum relative swelling deformation of the C 13 coal seam is 0.232%,while the mining height is 3.0 m and the distance from the B8 roof to the C13 floor is 129 m, which provides good agreement with a similar experiment and in situ results. The feasibility of exploitation of a super-remote protective coal seam and the performance of the pressure-relief gas drainage in a super-remote protected layer are evaluated by comparisons with practice projects. It demonstrates that the relieved gas in the super-remote protected layers could be better drained and it is feasible to exploit the B8 coal seam before the C13 super-remote protected coal seam. The method is applicable for the study of rock movements, mining fissures and deformation of the overburden, using the interface unit to analyze the contact problems in coal mines.     

Influence of isothermal aging onσprecipitation in super duplex stainless steel

The time-temperature-transformation (TTT) curve of the 00Cr25Ni7Mo4N duplex stainless steel was obtained with a Formastot-digital thermal dilatometer,and the influence of isothermal aging on σ precipitation was studied by metallographic observation,X-ray diffraction (XRD),and transmission electron microscopy (TEM).The results show that the decomposition of ferrite phase is accompanied by the formation of σ phase at 750-1000℃,especially in the range of 800-900℃.The longer the aging time,the higher the amount of σ precipitation.The area fraction of various phases remains at a certain value upon the completion of ferrite deformation.The temperature of 850℃ is the most sensitive transaction temperature,the incubation time for the formation of o precipitation is less than 1 min,and aging for 20 min leads to the complete transformation of ferrite.The o phase is formed preferentially at the α/α/γ junction,and then grows along the α/α boundary in the matrix.     

利用玉米秸秆制备高吸水树脂

将玉米秸秆预处理后与丙烯酸接枝共聚制备高吸水性树脂,采用单因素实验确定了合成条件中各因素的最佳水平:θ=45℃,引发剂中过硫酸钾用量为单体质量的0.8%,交联剂N,N-亚甲基双丙烯酰胺(MBAM)用量为单体质量的0.6%,m(AA)∶m(玉米秸秆)=8∶1,丙烯酸中和度为70%,t=4 h。对最佳条件下制备的树脂进行了性能测试,对秸秆预处理前后及产物进行了扫描电镜分析。结果表明,该树脂具有良好的吸水、保水性能,吸水率最高达到291 g.g-1,吸盐水率达到49 g.g-1。     

Effect of grinding on chemical and physical properties of rice husk ash

The effect of grinding on the chemical and physical properties of rice husk ash was studied. Four rice husk ashes with different finenesses,i.e. coarse original rice husk ash (RHA0),RHA1,RHA2,and RHA3 were used for the study. Ordinary Portland cement (OPC) was partially replaced with rice husk ash at 20% by weight of binder. The water to binder ratio (W/B) of the mortar was maintained at 110%±5% with flow table test. Specific gravity,fineness,chemical properties,compressive strength,and porosity test of mor...     

超高层钢结构建筑圆管柱的制作技术探讨

随着钢结构的不断发展,钢结构在越来越多的领域得到了广泛的应用,其技术日益成熟.为了不断提高钢结构工程的制作技术,根据青岛开发区国际贸易中心钢结构的特点和设计要求,结合其制作过程中的加工工艺,介绍了超高层钢结构建筑主体——大型圆管柱在制作中的生产工艺和加工流程,重点阐述了圆管柱的制作、组装、焊接等方面的要点,提出了一些加工过程中的建议,对其他相同结构形式的钢结构建筑具有一定的借鉴作用.     

开封引黄灌区灌溉条件下稻田土壤盐分阈值研究

结合各生育期水稻耐盐度、各处理实际种前初始土壤含盐量和对应生育期最高的土壤含盐量,分析了各灌溉处理条件下的稻田土壤含盐量在水稻各生育期的动态变化规律和允许初始土壤含盐量阈值.结果表明:控制灌溉及控制灌溉加淋洗条件下,各水稻生育期土壤含盐量均有不同程度降低,随着淋洗水量的增加土壤含盐量逐渐降低,并获得了不同灌溉方式下的允许稻田初始土壤含盐量阈值.此结论对实际应用有指导意义.     

糙米储藏品质评价数学模型的建立

为对糙米储藏过程中的劣变进行及时调控,选用2个粳糙米样品,测定不同储藏条件下的脂肪酸值、发芽率、生活力、电导率、降落数值等生理生化指标,进行各指标间的相关性分析,采用灰色关联度分析法对各项指标进行储藏品质敏感指标的筛选,并以各项敏感指标为自变量,以碾磨后的大米食味值为因变量,采用逐步回归的方法建立敏感指标与糙米最终食味值间的数学模型.结果表明:脂肪酸值、电导率对粳糙米储藏品质有显著影响,其中脂肪酸值对储藏品质敏感度最大,电导率次之;辽星糙米储藏品质评价的数学模型为y =92.57 +0.83X脂肪酸值-2.08X电导率,盐丰糙米储藏品质评价的数学模型为Y=-99.42+4.03X脂肪酸值-1.44X电导率.     

丛枝菌根(AM)对水稻生长促进及化肥减量研究

为了考察丛枝菌根(Arbuscular Mycorrhiza,AM)对水稻生长促进及化肥减量效果,以摩西球囊霉(Glomus mosseae)为实验材料在不同丛枝菌根真菌(Arbuscular mycorrhizal fungi,AMF)含量的基质中进行水稻盆栽试验.对比分析了水稻根部AMF的侵染状况,及其对水稻生长的促进作用,并在此基础上探讨了AMF强化在农业面源污染化肥减量中的作用.结果表明:自然基质中土著G.mosseae普遍存在,并可与水稻根系形成菌根结构,但其对水稻的影响与AMF空白基质相比差异并不显著.AMF强化能显著提高其对水稻根部的侵染率.与自然基质相比,AMF强化使水稻的株高、总生物量、根系总表面积及产量分别提高了20.6%、30%、36.6%、45.3%.经计算,每生产100kg水稻,AMF强化相对于自然条件下氮肥、磷肥、钾肥施用量分别减少3.14kg、1.88kg、2.42kg,削减程度高达47%.AMF强化能够有效促进水稻生长并提高其产量,而且在农业面源污染化肥减量方面具有重要作用.