AlN 粉末制备的热力学分析和实验研究

对制备 AlN 的体系 AlCl_3-NH_3-N_2进行了热力学分析,确立了 AlN 粉末合成所需要的热力学条件.在700～1000℃下,利用无水 AlCl_3和 NH_3的化学气相淀积反应合成得到了高纯 AlN 超细粒子粉末,研究了反应温度、AlCl_3浓度和总流量等对 AlN 粉末理化性质的影响.实验确立了产物低温和高温热处理条件.     

SiC粒子增强铸造Al基复合材料的研制

本文用真空烘烤封罐法对 SiC 粒子进行预处理,在固液两相区内搅拌添加,制造了铸造 Al 基复合材料。测试表明,该复合材料具有铸造性能好,力学性能高的优点,适用于采用压铸、石膏型精密铸造、金属型铸造等工艺方法成型的活塞、连杆等要求苛刻的零件。     

颗粒增强TiAl基复合材料及其Si的韧化作用研究EI

运用ＸＤ工艺制备了颗粒增强ＴｉＡｌ基复合材料。增强颗粒均匀分布于ＴｉＡｌ基体中并细化ＴｉＡｌ合金。通过在ＴｉＢ_２／ＴｉＡｌ、ＴｉＣ／ＴｉＡｌ复合材料中加入适量的Ｓｉ，颗粒增强ＴｉＡｌ基复合材料的室温延性得到了改善。     

Monitoring water quality in reservoirs with IRS-1A-LISS-I

An attempt has been made to quantify the relationship between the variation in IRS-IA-LISS-I (Indian Remote Sensing Satellite-1A Linear Imaging Self-Scanning System) radiance data and field measured change in secchi disc depth. Secchi disc depth was measured for 47 predetermined sampling locations on reservoir surface water. At extinction depth (secchi depth), water samples were collected from all the sampling locations. Suspended sediments of eight locations representing various reaches of the reservoir were selected for mineralogical, particle size and optical properties analysis. The LISS-I radiance value in band 1 (0.45–0.52µm) band 2 (0-52–0.59 µm) and band 3 (0.62–0.68 µm) were used in a regression analysis. The absorption infrared band 4 (0.77–0.86 µm) was not included in the analysis. In these, the dependable variable was secchi depth (SD) and the LISS-I-radiance data was the estimator variable. Forty-seven data sets of 20 October 1988 from Tawa reservoir surface water were used to obtain an estimator equation for SD. The verification of the estimator equation was tested by applying it to a data set of 21 measurements of 28 September 1988 for this reservoir. The coefficient of correlation between observed and estimated values for the 28 September 1988 data set wasr=0.92 for SD, indicating that the equation could accurately predict the water clarity (SD) for this reservoir on new occasions from IRS-IA-LISS-I spectral data. It is shown that mineral composition and optical properties of suspended sediments influence the reflected radiance of water quality. It is concluded that IRS-IA-LISS-I data provide a useful means of mapping water quality in reservoir.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

柘溪水库泥沙淤积情况调查简介

通过对 1995年柘溪水库泥沙冲淤调查资料的分析 ,对比 196 3年建库时及 1974年库区泥沙冲淤情况 ,获得建库以来库区泥沙沉积率及其泥沙分布的关系曲线 ,可为已建或拟建的同类泥沙淤积分析提供参考。     

脱硫废水旋转喷雾蒸发特性实验研究

脱硫废水旋转喷雾干燥技术是一种利用热烟气蒸发脱硫废水的零排放技术。开展了不同悬浮物（SS）含量的脱硫废水原水以及经浓缩的高盐废水的蒸发实验,采用可视化手段观察了脱硫废水在干燥塔内的蒸发特性,考察了脱硫废水喷雾蒸发过程中停留时间、进口烟气温度、气液比对蒸发特性的影响。结果表明,旋转喷雾蒸发工艺对高盐、高SS含量等复杂脱硫废水组分具有较佳的适应性;脱硫废水从旋转雾化器喷出后迅速蒸发,主蒸发区在雾化盘下方0.75~1.00 m区域内;随后是蒸发析出的未干盐分及未完全蒸发的废水液滴进一步蒸干至含水率低于2 %;烟气在喷雾干燥塔内的停留时间需要维持在20 s以上才能保证塔出口灰分含水率低于2 %;入口烟气温度越高,其塔底及塔出口的灰分含水率越低,在气液比为12 000 m³/m³（标准状态）的废水工况下,入口烟温为280 ℃时已经难以保证废水液滴良好蒸发;在入口烟气温度为340 ℃、气液比大于10 000 m³/m³（标准状态）时,塔底灰分含水率小于2%,蒸发效果良好。     

Micron-Scale Soft Actuators Fabricated from Multi-Shell Polystyrene Particle-Gold Nanoparticle Nanohybrids

Actuators made of soft matter are needed for a variety of fields ranging from biomedical devices to soft robotics to microelectromechanical systems. While there are a variety of excellent methods of soft actuation known, the field is still an area of intense research activity as new niches and needs emerge with new technology development. Here, a soft actuation system is described, based on a core-multi-shell particle, which moves via photothermal expansion. The system consists of a novel polystyrene-based thermally expandable microsphere, with a secondary shell of a silicate-silane graft copolymer, to which gold nanoparticles are covalently linked. The gold nanoparticles act as photothermal nano-transducers, converting light energy into the thermal energy necessary for microsphere expansion, which in turn results in material movement. Actuation is shown in isolated particles in thermal and photothermal regimes using metal ceramic heaters or 520 nm laser illumination, respectively. Macroscale actuation is demonstrated by making a composite material of particles suspended in the transparent elastomer polydimethylsiloxane. The sample demonstrates an inchworm-like movement by starting from an arched geometry. Overall, this work describes a new particle-based actuation method for soft materials, and demonstrates its utility in driving the movement of a composite elastomer.     

SiC含量对SiCp/Al复合材料摩擦性能的影响

采用粉末冶金技术制备了SiC_p/Al复合材料,探讨了SiC颗粒质量分数对SiC_p/Al复合材料密度、布氏硬度、微观形貌以及摩擦磨损性能的影响。结果表明,SiC颗粒表面形成了少量可提高界面结合性的Al₄C₃化合物。随着SiC质量分数增加,SiC_p/Al复合材料的密度没有明显的变化,当SiC质量分数增加至25%时,密度明显下降。SiC_p/Al复合材料的布氏硬度随着SiC质量分数的增加呈先增长后减小的变化趋势。当SiC质量分数为20%时,材料的硬度最优（HBW 114）,平均摩擦系数达到最大值（0.3425）,摩擦后试样表面形貌平整且犁沟较浅,SiC颗粒未出现明显剥落。