用双向扭转圆柱组合螺旋弹簧实现扭矩测试

利用单个圆柱螺旋扭转弹簧扭转原理,给出了一种用双向扭转圆柱组合螺旋弹簧实现扭矩测试的方法。根据扭转弹簧模型,给出了预紧力、加载的证明,并对实验结果进行分析;该结构用于扭矩测试系统既实用可靠,又简单易加工;降低了测试系统的成本,具有很高的实用价值。     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

不同类型在役抽油机机架受力分析

通过现场测试和检查,对油田特定区域内经过优化后的各种不同类型抽油机在额定载荷下的支架以及连杆受力情况进行了分析和评价。为在油田范围内进行机采设备的选型和推广提供一些参考。     

电解多功能天车打壳机构非正常失效的分析及解决方案

主要分析了电解多功能天车打壳机构中打击头、夹套、拉杆非正常失效的原因,并提出了解决的方案.     

明胶-异丙基丙烯酰胺水凝胶的溶胀性

以明胶和N -异丙基丙烯酰胺 (NIPAM )为原料 ,制备了明胶 -PNIPAM (聚N -异丙基丙烯酰胺 )水凝胶 ,研究不同的明胶 /NIPAM配比、温度、离子强度对其平衡溶胀度的影响。结果表明 :交联剂质量分数为 2 %时 ,当温度高于最低临界溶液温度 (LCST)值 ,水凝胶中明胶组分越多 ,凝胶的平衡吸水量越大 ;当温度低于LCST ,质量比为明胶 /NIPAM =5 /5 ,水凝胶的溶胀度最大。交联剂质量分数为 0 3%时 ,无论温度在LCST以上或以下 ,溶胀度都随明胶含量的增加而增加。离子强度对溶胀度的影响呈非单调性关系。     

In situ polyurethane/silica composite formation via a sol‐gel process

Polyurethane acrylate anionomer (PUAA)/silica composite gels were prepared by the sol‐gel reaction of tetraethoxysilane (TEOS) and methacryloxypropyl trimethoxysilane (MPTS) incorporated to PUAA gels by using a swelling method. The formation and structure of composites were confirmed by FTIR, X‐ray diffraction, and SEM. As a result, we found that silica components in composites are located within the ionic domains of their gels and interacted with PUAA via hydrogen bonding. This drastically enhanced the mechanical properties of the composites. Mechanical properties are also improved by MPTS, because MPTS improves the dispersibility and adhesion of silica components in PUAA/silica composite gels. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2327–2334, 2002     

Formation and investigation of epoxy intumescent compositions modified by active additives

Results are reported of research on intumescent composites based on epoxy resin cross‐linked with polyethylene polyamine and containing ammonium polyphosphate and such modifying additives as calcium borate, manganese dioxide, nickel, and chromium, containing tubulenes as gas‐formers and carbonization stimulators. The changes in composition and physicochemical properties of modified compositions under conditions of heat and fire were investigated by X‐ray photo‐electron spectroscopy, atomic force microscopy, and local force spectroscopy. Ammonium polyphosphate mainly stimulates carbonization processes on the inner surface of a bubble being formed during foam coke formation. The introduction of metal‐containing tubulenes leads to the formation of fire‐retardant and low flammability‐compositions with high coke and carbon structures content. The use of calcium borate in the compositions considerably increases the strength of foam coke being formed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1477–1483, 2002     

溢流反弧段水流边界层有关概念的探讨

本文对溢流反孤段水流边界层的定义方法进行分析讨论。在分析及弧段流速分布的基础上提出离心力附加边界层厚度和粗糙度附加边界层厚度的概念,研究了壁面曲率和壁面粗糙度对溢流反弧段边界层发展的影响。     

步行机攀登横杆的受力模型及分析

针对４足步行机器人的横杆攀登过程，在考虑弹性变形的基础上利用刚度矩阵建立其受力模型，并通过计算机仿真对攀登过程的不同情况进行了分析，其结果为具有攀登功能的步行机构结构设计及控制算法确定提供了理论依据。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.