二流量试井工艺及资料解释分析方法

描述了二流量试井工艺的实现，从常规分析和双对数曲线拟合两上方面，给出了二流量试井的资料解释分析方法，分析认为二流量试井同样可以计算出正常关井测压力恢复（或压力降落）资料所解释的油藏及流体参数。这种试井方法不但可以减少因正常关井测压对产油量和注水量的影响，而且可以减缓因突然关、开井造成的套管变形或损坏。实践证明，该试井技术方法具有较好的经济效益和应用前景。     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。     

连续流动分析仪应用于水中硫化物的测定

对连续流动法测定硫化物进行初步探讨和研究。同时与其他几种测定硫化物的方法进行了比较。实验结果表明，连续流动法对硫化物分析在线性、稳定性、最低检测限、准确性和精密度等方面均优于其他方法。     

土工格室在生态防洪工程中的应用

河北省迁安市滦河生态防洪工程是河北省重点工程建设项目，在建设中采用土工格室生态护岸工程技术，不仅大大提高了工程建设的速度和质量，而且延长了堤坝使用寿命，减少了维护成本，收到了环保、生态等方面的综合效益。     

江苏沙河抽水蓄能电站工程上进出水口设计

介绍了江苏沙河抽水蓄能电站上进出水口设计特点,上进水口体型参数的确定,工程处理措施,结构稳定分析和结构计算。     

Characteristics of the reactive distillation column with a novel internal

A new catalyst loading method, in which catalyst particles are packed in a reactor with a novel internal, has been studied by measuring pressure drop, RTD, liquid holdup and mass transfer. It can be inferred from experimental results that the internal changes the conventional gas and liquid counter-current flow into a new cross-current flow, so the problems of excessive pressure drop and “flooding” are avoided. When pressure drop, liquid holdup, RTD and mass transfer coefficient are similar, the catalyst loading fraction of the new method is much higher than that of conventional methods. Furthermore, the reactive distillation reactor with the novel internal has advantages such as simple structure, low operating cost, and convenience for installation and removal of the catalyst.     

论黄河三角洲流路演变及河口治理的指导原则

通过分析黄河三角洲流路演变中溯源堆积及溯源冲刷对典河下游河道影响的范围，幅度和作用历时，提出在黄河泥沙从根本上减少之前，河口治理的指导原则应是在有利于工农业发展和有利于防洪防凌前提下，有计划地安排河口流路。     

GaAs FET辐射退化研究

低噪声ＧａＡｓ ＦＥＴ和功率ＧａＡｓ ＦＥＴ经中子辐射都未发生致命性的通或断失效，直流偏置伏态下，其失效模式仅仅表现为源漏饱和电流ＩＤＳＳ的退化降低，据此提出了ＩＤＳＳ退化失效与快中子注量φｎ之间的解析关键式ｌｎｙ＝ａ＋ｂｌｎφ。     

A region-based selective optical flow back-projection for genuine motion vector estimation

Motion vector plays one significant feature in moving object segmentation. However, the motion vector in this application is required to represent the actual motion displacement, rather than regions of visually significant similarity. In this paper, region-based selective optical flow back-projection (RSOFB) which back-projects optical flows in a region to restore the region's motion vector from gradient-based optical flows, is proposed to obtain genuine motion displacement. The back-projection is performed based on minimizing the projection mean square errors of the motion vector on gradient directions. As optical flows of various magnitudes and directions provide various degrees of reliability in the genuine motion restoration, the optical flows to be used in the RSOFB are optimally selected based on their sensitivity to noises and their tendency in causing motion estimation errors. In this paper a deterministic solution is also derived for performing the minimization and obtaining the genuine motion magnitude and motion direction.     

Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.