High-speed ground moving target detection research using triangular modulation FMCW

The frequency modulated continuous wave (FMCW) radar has the characteristics of low probability of interception, good hidden property and the ability to counter anti-radiation missiles. This paper proposes a new method for high-speed ground moving target detection (GMTD) using triangular modulation FMCW. According to the characteristic of the opposite range shift induced by the upslope and downslope modulation FMCW, the upslope and downslope are imaged, respectively. After compensation of continuous motion of the platform and time difference between upslope and downslope signals for imaging, the moving target can be detected through displaced phase center antenna (DPCA) technology. When the moving target is detected, the moving target image is extracted, and correlation processing is used to obtain the range shift, which can be used to estimate the target radial velocity, and further to find the real position of the target. The effectiveness of this method is verified by the result of computer simulation. __________ Translated from Journal of Xidian University, 2008, 35(4): 586–591 [译自: 西安电子科技大学学报(自然科学版)]     

水压引信目标分类的研究

本文提出一种模糊统计分类 FSC 方法,用于研究水压引信目标分类问题。在建立水面目标场多级网络分类模型的基础上,分析讨论了此方法的特征提取、识别函数、模糊与冲突、搜索算法等技术问题,并通过仿真实验,对水面目标航速、吨位、横距进行分类处理,结果表明,FSC 方法行之有效。     

ADS熔盐散裂靶中子学性能研究

与传统加速器驱动次临界系统（ADS）采用金属靶作为散裂中子靶的设计不同,加速器驱动次临界熔盐堆（AD-MSRs）采用靶堆一体的设计,直接使用燃料熔盐作为散裂中子靶。由于熔盐靶的中子学性能直接影响AD MSRs的能量放大系数、核废物的嬗变和核燃料增殖的效率,所以本研究基于MCNPX程序,详细计算了高能质子轰击氟盐和氯盐两种熔盐靶产生的散裂中子产额、散裂中子能谱、能量沉积分布以及散裂产物等中子学性能,并与液态Pb和铅铋共熔体（LBE）两种液态金属靶进行了对比。计算结果表明,熔盐靶在散裂中子产额上与液态金属靶有一定的差距,但熔盐靶内能量沉积分布的梯度较小,更有利于靶区的热量导出。与液态Pb和LBE靶相比,熔盐靶的散裂产物中包含更多的气体以及高质量数的α发射体核素。     

基于背景分类的运动目标检测算法

针对光线暗、对比度和分辨率低的监控视频,提出了一种基于背景分类的运动目标检测算法。 首先用视频第一帧图像HSV空间的色度H和亮度V作为背景特征进行初始化,建立两种包含色度和亮度特征的背景模型类,即初始化得到的原始背景类和受光照或者其他因素影响得到的在原始背景周围波动的背景波动类,利用这两个背景模型进行前景检测和背景更新。为提高前景检测的准确率,背景模型的更正加入背景更正机制和权重机制,使得背景中样本的数量根据背景的实际情况处在一种动态的变化中,提高前景分割的效率。用不同场景下的监控视频进行算法对比实验,结果证明,该算法获得的前景完整清晰,视频处理的速度较快。提出的算法简单实用,对噪声干扰表现出良好的鲁棒性。     

Boolean difference techniques in fault tree analysis

For an electrical, mechanical, or hybrid system described diagramatically as a network of interconnected components, fault tree modeling of system reliability as a function of individual component failure probabilities gives rise to logic expressions obtained from the network connections. Application of the method of Boolean differences in the analysis of such Boolean expressions is discussed, and it is shown that the influence of the status of specific components on the reliability of the total system may be investigated by straightforward algebraic operations on the network failure function.     

A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

基于差分进化算法的面目标瞄准点寻优

瞄准点的寻优选取是导弹火力筹划的核心理论问题之一。针对此问题,本文基于矩形面目标毁伤面积计算设计评价函数,利用差分进化算法原理对面目标的瞄准点坐标进行实数编码,并设计差分进化算子,建立面目标瞄准点寻优模型。通过设计面目标计算实例对模型进行验证,实验结果表明,差分进化算法的稳定性较强且具有较好的操作性,模型求得的瞄准点可信度较高,能够提升导弹打击效果并降低打击成本,为火力筹划中瞄准点寻优提供了新方法。     

修正的抗剪强度参数可靠度分析方法

在抗剪强度参数可靠度分析中,针对摩尔库仑强度准则方程表现出的非线性,给出了修正的可靠度分析方法.首次选取泰勒级数的部分二次项,用一个距原点最近点处拟合的超低维曲面近似极限状态面.推导了修正的可靠度计算公式,较原有的可靠分析方法(JC法),计算精度得到进一步的提高.     

依靠可靠性管理提高机组稳定性

论述了发电设备可靠性在电力系统中的重大意义。借助可靠性管理对设备检修进行管理,为设备提供最佳的检修工期及最佳检修时间,并逐步完成由计划检修向状态检修过渡,及时根据设备情况提供有效的可靠性分析,为设备状态检修做出裁决,使设备真正做到“有病则医,无病运行”,在生产的全过程充分发挥可靠性管理的重要作用。     

软件可靠性模型Jelinski－Moranda的计算机实现

Ｊｅｌｉｒｉｓｋｉ一Ｍｏｍｎｄａ模型是软件可靠性模型中的古典模型。本文给出此模型的计算机实现，并引用一个实例对此程序进行验证。