AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

蒸汽压法测定导热油热分解温度的研究

根据克拉贝龙—克劳修斯方程，建立了国内外文献未见报道的测定导热油热分解温度的试验装置和试验方法，测定了大量国内外导热油的热分解温度，数据表明该法具有准确、简单、实用、省时、省力等优点     

Nb,Ti微合金钢热变形的动态模拟变形抗力模型

本文报道 Nb,Ti 微合金钢的热变形动态模拟变形抗力模型。在试验中用热加工模拟试验机进行高温压缩试验,其变形温度为1123—1423K,变形速率为0.1—60s~(-1)。结果表明,在峰值以前该钢种的流变应力数学模型为:σ=5.99.ε~(0.167)·(?)~(6.47×10~(-5)·T)·exp(4064/T)。形变激活能(Q)为444 kJ/mol,β系数为0.080。峰值应力(σ_p),临界应变(ε_c)和温度补偿应变速率参数(Z)之间的关系分别为:σ_p=12.56·lnZ-391.8;lnε_c=0.157·lnZ-7.39。     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

Effect of temperature and retention period on biogas production from lignocellulosic material

The extensive utilization of biogas for energy needs of rural dwellers would reduce their dependence on fossil fuels and fuelwoods and henoe camplement Government afforestation programes. In this investigation, effect of temperature and retention period on biogas production from lignooellulosic material, hereafter referred to as cow dung were studied. Maximum gas production was dotained at thermophilic temperature. The results of the effect of retention period shows that gas production was qotimum at 4th and 7th weeks of production.     

Prediction of High-Temperature Long-Term Strength for Damaged Structures

A method is proposed for analytical estimation of the high-temperature long-term strength of structures with material discontinuities, which are stress raisers. We consider the processes involving the formation of diffusion pores. Diffusion processes in metals are strongly enhanced with increasing temperature and stresses.     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

电子吊舱微环境智能控制系统

介绍了一种由高性能空气循环冷却系统和以微处理器为核心的智能测控系统组成的新型电子吊舱微环境控制系统，该系统制冷性能优良，节能效果好，数据采集，存储，实时处理，控制，报警功能完全硬件化，实现了对吊舱微环境温度，温度，压力的综合可靠控制，其设计思想和方法可推广应用于其它航空，航天和地面复杂环境的控制。     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

Introduction to geothermal exploration on ascension island, South Atlantic Ocean

The exploration for a geothermal resource on Ascension Island utilized a strategy that initially employed geologic mapping. On the basis of this, subsurface faults were mapped using an aeromagnetic survey. The faults were then explored using electrical resistivity surveys to define areas of potential hydrothermal fluid up-welling. The results of all of these techniques were used to site temperature gradient holes. A deep geothermal exploration well was then drilled in the area with highest heat flow adjacent to a rhyolite-to-trachyte volcanic complex.