ANALYSIS OF EXPERIMENTAL AND NUMERICAL RESULTS OF A TURBULENT SWIRLING FLOW IN A TUBE

In many applications swirling flow is used to enhance heat and mass transfer. One of the problems of modelling a turbulent swirling flow is the choice of the turbulent closure model which is acceptable for engineering purposes. To evaluate which model performs best, numerical results are compared with experimental data. Local velocity measurements are carried out on a swirling flow in a circular tube. The measurement method is hot-wire anemometry combined with visualization techniques. The numerical analysis is carried out using the k-ε model and the Algebraic Stress Model. In the experiment a symmetrical swirl was observed, Comparing the experimental data with the numerical results shows that the Algebraic Stress Model represents the experimental data quite well, whereas the k-ε model fails.     

Sorption of solvents in plastics and solvent desorption and retention

The experiments reported here have studied the following systems within the temperature range 25–50°C: sorption and desorption of solvents on LDPE, OPP, PS, rigid PVC, OPA, PETP and regenerated cellulose with methanol, ethanol, n-propanol, and ethyl acetate. With reference to these, the theory presented indicates the most important aspects related to the tests, refers to identification data on similar problems and enumerates the possibilities of interaction. The application of equation 1 and the reported measuring method allows the determination of diffusion coefficients within a vapour-saturated atmosphere system. As the gravimetric method also allows the determination of solubilities (α_L, the solubility coefficient), the permeation behaviour in the Fick range is calculable from The equation used by the author can be related to other equations from the technical literature, such as for the range Q_(t)Q∞>0.4, or where for the range <0.4 The agreement can be considered as good. The D values provide a calculation base within the scope of the outlined problem definition. The taste limits for solvents in water reveal which solvents could, as residual solvents, become critical. These values—connected with sorption/desorption identification values, evaporation numbers etc. —indicate where there is a risk and those cases where sufficient drying, or even the use of more adequate solvents is essential.     

一种新的无线电高度表原位检测的高度模拟方法

针对目前对高度表进行原位检测的需求,设计了一种新的高度模拟方法;该方法的实现以ARM为核心,通过高度模拟电路产生各种需要的高度电压信号,从而达到高度模拟的目的,并且无需对机载高度表进行拆装,操作简单、快捷、可靠性较高;实验结果表明,这种方法的高度模拟精度较高,具有一定的实用价值和经济效益.     

More on Goddard and the Kallikak family photographs.

Discusses retouching of the Kallikak family photographs in H. H. Goddard's (1912) study of mental retardation and heredity, with reference to analyses by R. E. Fancher (see record 1987-31600-001) and S. J. Gould (1981), and concurs with Fancher that the retouching was probably not done for deceitful purposes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

CAD与CAPP集成研究回转体类零件特征识别

本文研究了回转体轴类,轴套类零件的特征识别。对这类零件常用的特征单元进行了定义,描述了这类零件的特征模型:介绍了它的识别方法和特征参数定义方法。     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多媒体课件改变了教师的“主讲”地位

随着高等教育教学改革步伐和数字化教学的不断推进和发展,越来越多的教师热衷于多媒体教学课件的使用和研究,传统的教学模式被逐渐取代,教师教学的主导地位越来越不明显,数字教学的时代悄然而至。     

用仪器中子活化分析法检验环境土壤标样的均匀度

近年来,国际上标准参考物质的种类与数量急剧增加,一些重要的领域,象地球化学、环境科学、生物学等都有了相应的SRM。国内研制SRM的工作也十分活跃。 标准样品必须均匀,故在分析定值和样品发行前,需要先作均匀性检验。由于均匀性是一个相对的概念,它与各个元素在SRM中的分布紧密相关。取样量直接影响均匀性的好坏。因此,当给出SRM中某元素的均匀性数值时,必须注明相应的取样量。由于仪器中子活化分析法(INAA)具有灵敏度高、不破坏试样、且可同时测定多种元素等特点,因此可在较小的取样量情况下,实现对SRM中多种痕量元素的均匀性检验。     

四辊铝箔轧机预控参数在线整定

介绍Ф210mm/Ф500mm× 800mm四辊液压轧机厚度预控系统中采用人机界面实现参数在线调整的方法,能大大提高预控参数的控制精度,减少轧机产品的厚度误差,是厚度自动控制的一项创新.