Screening model for assessing ‘cost’ of minimum flow requirements in the Svartå River,Sweden

The minimum flow requirements in the Svartå River in Sweden are directed at maintaining fishlife and providing suitable dilution for waste flows. The implications of varying the minimum flow requirements in the river are examined using a mixed integer optimisation model. The model is formulated as a modified method-of-weights technique with the economic issues of hydro-electricity generation, irrigation and urban water supply placed in the objective function and the minimum flows specified within the constraint set. The integer component of the model is required to model the operating policy at the major flow regulation facility in the system and the restricted validity of the irrigation permits. Application of the model shows that in dry years where competition between minimum flow levels and the other economic uses, is most intense, the levels achieved by the various economic objectives are only slightly reduced even with significant increases in the minimum flow requirements. Variations in minimum flow requirements of up to 45% only produce changes of 10% or less in the economic objectives. The lack of sensitivity of the objective levels is due primarily to the level of control exerted indirectly on the whole system in dry years by the release regulation policy and the restricted validity of the irrigation permits. In normal to wet years these policies are not as restrictive and more choice is available. In such years, however, there is generally sufficient water to satisfy all requirements and allocation is not a critical issue. The model itself is formulated generally so that a range of scenarios beyond those examined specifically in the paper can be considered.     

石英砂的相变与换向器套筒铸件的变形

用呋喃树脂石英砂工艺生产牵引电机换向器套筒出现变形、裂纹等铸造缺陷,是由石英砂相变膨胀引起,后用高铬刚玉砂代替石英砂得到解决.     

20 kg铝锭铸造机铸模改进方案探讨

为了适应火车全面调速后货运高度的要求，提出了有效的铸模改进方案。对铸模改造前后的使用寿命进行了分析。通过改造达到了降低铝锭垛高的目的，同时延长了铸模的使用寿命。     

ON THE UNIMODALITY OF THE EXACT LIKELIHOOD FUNCTION FOR NORMAL AR(2) SERIES

Abstract. For stationary second-order autoregressive normal processes, the conjecture of uniqueness of the solution of the exact likelihood equations is examined. A sufficient condition for uniqueness is given; this condition is satisfied with very high probability if the number of observations is not extremely small. Moreover, it is shown that not more than two maxima may exist. Examples of data which actually produce a likelihood function with two local maxima are given.     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

Robust spatial flood vulnerability assessment for Han River using fuzzy TOPSIS with α-cut level set

This study aims to improve the general flood vulnerability approach using fuzzy TOPSIS based on α-cut level sets which can reduce the uncertainty inherent in even fuzzy multi-criteria decision making process. Since fuzzy TOPSIS leads to a crisp closeness for each alternative, it is frequently argued that fuzzy weights and fuzzy ratings should be in fuzzy relative closeness. Therefore, this study used a modified α-cut level set based fuzzy TOPSIS to develop a spatial flood vulnerability approach for Han River in Korea, considering various uncertainties in weights derivation and crisp data aggregation. Two results from fuzzy TOPSIS and modified fuzzy TOPSIS were compared. Some regions which showed no or small ranking changes have their centro-symmetric distributions, while other regions whose rankings varied dynamically, have biased (anti-symmetric) distributions. It can be concluded that α-cut level set based fuzzy TOPSIS produce more robust prioritization since more uncertainties can be considered. This method can be applied to robust spatial vulnerability or decision making in water resources management.     

基于FPGA的高速数据存储系统优化设计

针对遥测系统数据记录装置中数据传输速率与存储速率不匹配的问题,提出Flash的并行存储方案,采用交替双平面的编程方式可以使得存储器的存储速率达到单片Flash最高存储速率的2倍,即60 MB/s;对控制单元FPGA内部双端口RAM的逻辑设计进行改进,解决了数据存储异常的现象。在数据回收方面,提出了多备份的设计思想和备用读数接口的设计方案,已在工程应用中得到成功实践,验证了该数据记录装置的可靠性。     

基于现场总线的油品添加剂生产监控系统的设计

油品添加剂在工业中的应用越来越广泛,加入油品中能显著改善油品原有性能或赋予油品某些新的品质。介绍了油品添加剂的生产控制要求,通过对三合仪表自主研发的SHCAN2000系统以及FIX组态软件资料的查阅,设计一套基于现场总线的油品添加剂生产监控系统。     

Qt在EQT格式地震日志转换中的应用

主要讨论了基于Qt的地震日志格式转换软件的设计及其实现方法。     

SAR车辆信号仿真与微动特性分析

合成孔径雷达(SAR)由于其自身条件的限制,导致在日常的研究中需要人为的在计算机上对其信号进行一些仿真。在得到的仿真信号中包含着目标的微动信号,这些微动信号对应着目标的微动特性,它们是目标的本质属性,是目标特性研究的重点。而微动特性又会受到目标和雷达参数等的影响,因此,需要对不同参数下目标的微动特性进行研究。主要以机载SAR为模型,构建模型仿真,并对目标参数、雷达参数、仿真参数等进行完整的特性分析。其中仿真主要采用散射点模型,运用采样序列分段置零的仿真方法构建仿真模型;再运用时频分析方法对得到的仿真结果进行特性分析;由于场景中很多参数如PRF、车身速度、车轮半径、散射点采样个数、车身运动方向与方位向夹角等会对目标的微动特性产生影响,因此,改变这些参数再用时频分析方法对不同参数下的仿真结果进行分析,并最后对其进行总结来研究目标的微动特性。