Polysulphone and poly(phenylene sulphide) blends: 1. Thermal characterization and phase morphology

The phase behaviour and morphology of injection moulded specimens of polysulphone (PSF) and poly(phenylene sulphide) (PPS) blends were studied by differential scanning calorimetry (d.s.c.), dynamical mechanical thermal analysis (d.m.t.a.) and transmission electron microscopy (TEM). The blends are phase separated regardless of the blend composition as revealed by d.s.c., d.m.t.a. and TEM. Upon annealing at 160°C for 2 h, d.m.t.a. results indicate that the PPS phase remains in the amorphous state at compositions <10%. At compositions between 20 and 35%, the PPS appears to be dispersed in a mixed mode of amorphous and crystalline domains. Above 35% the PPS phase appears to become fully crystallized upon annealing of the blends. At 10% PPS, TEM results showed 35–200 nm size dispersion both in the as-moulded and in the annealed specimens. At 20% the PPS phase varied widely in size, from 35 nm to tens of micrometres but remained as an included phase. TEM also revealed a compound morphology of the included phase at a composition of 50 wt% of each component.     

车轮的热烈和磨损机理与抗热裂耐磨车轮的研制

本文研究了车轮踏面的热裂和磨损机理,结果表明,车轮热裂主要与其含碳量和硬度有关;在使用合成闸瓦时,车轮踏面的磨损率与新形成的“白层”(马氏体)的断裂韧性有关。研制的抗热裂耐磨车轮(55SiMn)取得了明显的运用效果。     

TBC experience in land- based gas turbines

This paper summarizes prior and on-going machine evaluations of thermal barrier coatings (TBC) for power generation, that is large industrial gas turbine applications. Rainbow testing of TBCs on turbine nozzles, shrouds, and buckets are described along with a test of combustor liners. General Electric Power Generation has conducted more than IS machine tests on TBC turbine nozzles with various coatings. TBC performance has been quite good, and additional testing, including TBCs on shrouds and buckets, is continuing. Included is a brief comparison of TBC requirements for power generation and aircraft turbines.     

固态功率组件热耦合效应研究

文中基于热叠加原理研究了固态功率组件中多个离散分布的集中热源的热耦合效应,并证明强迫对流下应用热叠加原理计算的温度场与整场系统数值模拟的结果相当吻合,用它来进行热耦合效应的分析研究是有效的.     

Recent development and applications of an optical method for measurements of thermophysical properties

The experimental determination of thermophysical properties has been greatly improved by the introduction of laser technology. The laser beam is used for sensing and also for heating (or exciting) the specimen. The advantage of using a laser beam is most strongly felt in the measurement of the thermal conductivity or the thermal diffusivity, which are some of the most difficult properties to measure. Interesting features of new techniques for investigating various aspects of thermal conductivity in fluids and solids are reviewed. An optical method, the so-called forced Rayleigh scattering method, or the laser-induced optical-grating method, has been developed and used extensively by the present author's group. The method is a high-speed remote-sensing method which can also quantitatively detect anisotropy, namely, direction dependence of heat conduction in the material. It was used for determination of the thermal diffusivity and its anisotropic behavior for high-temperature materials such as molten salts, liquid crystals, extended polymer samples, and flowing polymer melts under shear. Interesting applications of the method were demonstrated also for thermal diffusivity mapping and microscale measurement.Invited paper presented at the Twelfth symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Epitaxial growth and thermal-conductivity limit of single-crystalline Bi2Se3/In2Se3 superlattices on mica

Nano Research - Thermal transport in superlattices is governed by various phonon-scattering processes. For extracting the phonon-scattering contribution of hetero-interfaces in chalcogenide...     

一种新型的加固计算机箱设计

介绍了一种新型加固计算机机箱,其独特的双层箱体结构,使它适合在各种复杂恶劣的环境条件下使用。通过设计实践,阐述了该箱体的结构特点和密封、隔振缓冲、电磁兼容等方面的具体解决方法,特别是箱体成型和综合热设计等关键技术。经环境试验和工程实际应用的检验,证明其具有较好的综合防护性能。