Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

临南油田夏52块沙三中泥质砂岩油层精细评价

临南油田夏 5 2块沙三中泥质砂岩油层分布广 ,未动用程度高 ,为了稳定产量 ,急需寻找可直接投产的泥质砂岩油层。本文利用相渗实验资料建立油相相对渗透率与含水饱和度关系 ,从而建立有效渗透率的解释模型。依据有效渗透率和有效厚度将泥质砂岩油层划分等级 ,分区评价 ,这不仅有利于合理开采和保护此类油层 ,降低其生产成本 ,也为预测此类油层产能提供依据     

几何非线性复合材料层合固体壳单元

通过定义广义应力,提出了一个改进的刚度矩阵,以克服固体壳元的厚度自锁问题,并能保证沿复合材料层合结构厚度方向上的连续应力分布;将应力插值函数分为低阶和高阶两部分,建议了一个新的非线性变分泛函,推导了一个用于几何非线性分析的九节点固体壳单元,该单元的计算精度和效率基本上与九节点减缩积分单元相当,与同类型其他单元相比,该单元显著提高了计算效率。     

汽车摩擦片厚度测量装置驱动电路的研究

本文通过对摩擦片厚度在线测量装置系统构成的全面分析，对其驱动电路子系统进行了理论探索和技术研究，完成了相应的电路设计、误差分析及器件选择等工作，并进行了具体的实验验证，证明该驱动电路具有良好的性能，可圆满实现摩擦片厚度在线检测和实时分析的工作任务。     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.     

冲击回波法检测隧洞混凝土衬砌厚度

冲击回波法是通过接收、分析在混凝土中传播的回波信号，判断结构混凝土厚度和内部质量的新型无损检测技术。室内试验和工程应用研究表明，该方法为隧洞混凝土衬砌厚度检测提供了一个有效的测试手段。     

黄河西霞院工程地震薄层反射问题的探讨

该文通过黄河西霞院夹砂层勘察存在的问题，引出了地层薄层地震反射同相轴出现的理论依据，从而计算出在本地区探测地层薄层厚度的分辨率。     

Substantiation of Application of Overburden Rehandling in Flat-Dipping Deposits

The layer reexcavation ratio is proposed to use for determination of overburden thickness in the combined conveying and direct-dumping systems of mining by draglines with haulage to goaf. It is established that this method ensures the decrease in costs of mining the horizontal and flat-dipping deposits.     

Investigation into Displacement of Placer Gold Particles

The experimental research in displacement of gold particles in washed-out thickness of sand-gravel layer is conducted. The parameters of ability of gold particles to migrate in pulp flow are determined, and their immersion into loose soil is investigated.     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions