一般应力比时焊接结构S－N曲线的预测方法

本文考虑了焊接结构的几何形状、受载形式、应力比、残余应力、尺寸效应以及材料等因素对疲劳寿命的影响，利用Ｐｅｔｅｒｓｏｎ公式和极值疲劳切口系数概念，建立了一般应力比时焊接结构Ｓ－Ｎ曲线的预估模型．文中对几类典型的焊接结构的Ｓ－Ｎ曲线进行了预测，预测值与实验结果符合较好．本文方法可以大量减少疲劳实验，具有一定的工程实用价值．     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

用于X光激光实验的反射式线聚焦光学系统的设计和分析

基于三维光线追迹的象差计算,对卢瑟福实验室用离轴球面反射线聚焦系统作了分析。然后,首次提出了用于X光激光实验的两类新的反射式线聚焦构型,即反射式光楔列阵和光锥列阵系统,并作了计算。最后,对所得结果作了比较和讨论。     

Cohesive stresses and size effect in quasi-brittle materials

A novel approach to the derivation of Bažant’s size effect law is presented. Contrarily to the original Lagrangian derivation which hinged on energetic consideration, a Newtonian approach based on local stress intensity factors is presented. Through this approach, it is shown that Bažant’s size effect law is the first (and dominant) term in a series expansion for the nominal stress. Furthermore, analytical expressions forB are derived for selected specimen geometries.     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

A mesomodel for the numerical simulation of the multiphasic behavior of materials under anisothermal loading (application to two low-carbon steels)

The determination of residual stresses induced by welding or heat treatment operations requires the use of complex models taking into account thermal, metallurgical and mechanical phenomena. In this paper, we propose a mechanical model in which each phase can follow its own constitutive law. This model also takes into account phase transformation plasticity, which is treated independently of the behavior of each phase. This model has been implemented into the French FEM code Castem 2000. The interest of the proposed method is that it allows one to mix any type of nonlinear behavior using Taylor homogenization hypothesis. There is no need to develop a theory to get the equations of the homogenized material law. Two numerical examples demonstrate the efficiency and the flexibility of this approach. The results obtained are compared to experimental values for a typical welding situation and a high-temperature response. This comparison seems to indicate that viscous effects in the materials have a significative influence on the residual stresses produced by welding.     

热流体喷射变形机理与喷嘴结构

高速短程纺技术能生产三维卷曲短纤维,该技术的关键之一是热流体喷射装置。本文介绍了热流体喷射装置的演变与特点及它的加工机理和某些已应用的实际装置。     

磨机大齿轮对缝处产生张口的初探

针对大中型磨机大齿轮对缝处在使用中会产生张口现象而降低其使用寿命的问题,从分析产生张口的原因入手,通过理论计算,提出设计的配合间隙,并指出在安装与使用中应注意的问题.