哈得逊隆起下石炭统基准面旋回与储集层预测

依据基准面旋回原理和方法,综合利用哈得逊地区的钻井、测井、地震以及地球化学资料,在研究区下石炭统识别出1个Ⅰ型和3个Ⅱ型层序界面,将哈得逊地区下石炭统划分为3个中期基准面旋回：SC1、SC2、SC3,对应于早石炭世海侵的3个海进-海退旋回.SC1旋回以滨岸砂坝沉积为主,而SC2、SC3旋回发育潮坪沉积体系.研究认为,SC1旋回滨岸砂岩及SC2下降半旋回的潮间带薄层砂岩为有利储集砂体,是地层-岩性型油气藏的重点勘探目标.     

Battery-Aware Routing for Streaming Data Transmissions in Wireless Sensor Networks

Recent technological advances have made it possible to support long lifetime and large volume streaming data transmissions in sensor networks. A major challenge is to maximize the lifetime of battery-powered sensors to support such transmissions. Battery, as the power provider of the sensors, therefore emerges as the key factor for achieving high performance in such applications. Recent study in battery technology reveals that the behavior of battery discharging is more complex than we used to think. Battery powered sensors might waste a huge amount of energy if we do not carefully schedule and budget their discharging. In this paper we study the effect of battery behavior on routing for streaming data transmissions in wireless sensor networks. We first give an on-line computable energy model to mathematically model battery discharge behavior. We show that the model can capture and describe battery behavior accurately at low computational complexity and thus is suitable for on-line battery capacity computation. Based on this battery model we then present a battery-aware routing (BAR) protocol to schedule the routing in wireless sensor networks. The routing protocol is sensitive to the battery status of routing nodes and avoids energy loss. We use the battery data from actual sensors to evaluate the performance of our protocol. The results show that the battery-aware protocol proposed in this paper performs well and can save a significant amount of energy compared to existing routing protocols for streaming data transmissions. Network lifetime is also prolonged with maximum data throughput. As far as we know, this is the first work considering battery-awareness with an accurate analytical on-line computable battery model in sensor network routing. We believe the battery model can be used to explore other energy efficient schemes for wireless networks as well.     

Non-pinched, minimum energy distillation designs

Non-pinched, minimum energy solutions are important class of distillation designs that offer the potential advantage of a better trade-off between capital investment and operating costs. In this paper, two important tasks associated with non-pinched distillation designs are studied. Thus the novel contributions of this work to the literature are

(1) A comprehensive methodology for finding non-pinched minimum energy designs.

(2) Understanding of the reasons for the existence of non-pinched distillation designs.

It is shown that the recent shortest stripping line distance approach of Lucia et al. [Lucia, A., Amale, A. and Taylor, R., 2007, Distillation pinch points and more. Comput Chem Eng, available on-line] is capable of systematically and reliably finding non-pinched, minimum energy distillation designs. In addition, we provide an understanding of the reasons behind the existence of non-pinched designs, which include trajectories that follow unstable branches of a pinch point curve in azeotropic systems, the inherent looping structure of trajectories in hydrocarbon separations, and the presence of ancillary constraints in multi-unit processes like extraction/distillation. Several distillation examples are studied and many numerical results and geometric illustrations are presented that show the shortest stripping line distance methodology is indeed a powerful and systematic tool for computing non-pinched, minimum energy designs and that support the underlying reason we provide for the existence of non-pinched designs.     

Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

低温电解的节能实验研究

本文以中国铝业河南分公司电解厂85kA中间点式下料预焙槽为研究对象，通过6个月的低温电解实验，改善“四低一高”(低电解温度、低分子比、低氧化铝浓度、低效应系数和高极距)技术条件，优化工艺技术条件配置，降低分子比和电解温度，维护炉膛的规整，维护电解槽工作电压的稳定，规范员工作业标准，达到提高电流效率、降低电耗的节能效果。     

氧气合理利用决策支持系统和空分装置操作仿真系统

分析了钢铁企业空分系统能源管理的特点 ,并开发出降低空分能耗的应用软件 :氧气合理利用决策支持系统和空分装置操作仿真系统。前者可为决策者提供全面的辅助决策信息和决策支持以降低氧气放散 ,实现氧气的合理利用 ;后者既可实现空分装置运行操作的仿真 ,也可实现空分装置的仿真实验和仿真操作 ,为实施空分装置的节能优化运行提供技术支持     

基于西门子楼宇自控系统的中央空调计费系统

介绍了基于西门子楼宇自控系统的空调计费系统的软硬件设计和具体实现.该系统的特点是借助西门子S600系统强大的数据处理和控制能力,采用时间记录和能量测量相结合的方法进行计费,具有实时监测和定时输出报表功能.该系统计量准确、计费合理、安全可靠、性价比高,满足了现代物业管理的需要.     

The Transport Properties of Hot Electrons in a Xenon/Methane Mixture

The results are given of numerical solution of the Boltzmann equation in a binomial approximation in view of elastic and inelastic electron collisions in Xe+CH₄ mixtures and in pure methane. The electron energy distribution functions obtained are used to calculate the electron transport coefficients for E/N values of up to several Townsends, i.e., the drift velocity, mobility, average and characteristic energies, diffusion coefficient. The results of calculation for pure methane fit the available experimental data. A similarity rule is found for the electron transport coefficients in a Xe+CH₄ mixture with different concentrations of methane molecules, which enables one to determine the values of transport coefficients in a mixture with a minor (less than 30 percents) methane content.     

The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.     

VSR调节技术在煤气加压机上的应用及分析

叙述了VSR(The Variable Spin Regulator）调节技术在南钢气体供应公司成功应用的实例。实际运行证明，VSR调节技术具有调节灵敏、抗喘、节能、软启动等方面的技术优势。文中还简明地阐述了VSR调节技术的原理并分析比较了液偶及变频调节。