Bi2—xPbxSr2Ca2Cu3Oy系高Tc超导体相变的研究

用DSC研究了高T_e超导体B_(2-r)Pb_rSr_2Ca_2Cu_sO_v(x=0,0.2,0.4,0.6)从室温至600℃范围内的相变。在320℃和440℃附近有二个吸热蜂,每一个峰对应一个相变过程。440℃附近的相变是不可递的,其原子激活能为1.37eV,是由高T_e相向低T_e相的转变。而320℃附近的相变则与超结构的形成有关。     

纤维素衍生物液晶相转变和织态结构

本文综述了纤维素衍生物液晶态相转变和织态结构。描述了纤维素衍生物从各向同性态向液晶态的转变过程和液晶态的织构特征。讨论了溶液浓度和温度对液晶相织构的影响。探讨了各种因素,如溶剂、取代基含量、外加力场和外加磁场等对液晶相的形成及织态结构的影响。     

Influence of silicon on the growth of barrier-type anodic films on titanium

Amorphous anodic titania, stabilised by incorporation of silicon species, is shown to grow to high voltages on sputter-deposited, single-phase Ti-Si alloys during anodizing at a constant current density in ammonium pentaborate electrolyte. The films comprise two main layers, with silicon species confined to the inner layers. An amorphous-to-crystalline transition occurs at ∼60 V on the Ti-6 at.% Si alloy, while the transition is suppressed to voltages above 140 V on alloys with 12 and 26 at.% silicon. The crystalline oxide, nucleated at a depth of ∼40% of the film thickness, is associated with the presence of a precursor of crystalline oxide in the pre-existing air-formed oxide. The modified structure of the air-formed oxide due to increased incorporation of silicon species suppresses the amorphous-to-crystalline transition until the onset of dielectric breakdown. The transport numbers of cations and anions during growth of the anodic oxides are independent of the concentration of silicon species in the inner layer, despite the marked change in the field strength.     

Time-series primitive static states for detailing work state and flow of human-operated work machine

This paper proposes a quantification method for a comprehensive work flow in construction work for describing work states in more detail on the basis of analyzing state transitions of primitive static states (PSS), which consist of 16 symbolic work states defined by using on-off state of the lever operations and joint loads for the manipulator and end-effector. On the basis of the state transition rules derived from a transition-condition analysis, practical state transitions (PST), which are common and frequent transitions in arbitrary construction work, are defined. PST can be classified into essential state transition (EST) or nonessential state transitions (NST). EST extracts common phases of work progress and estimates positional relations between a manipulator and an object. NST reveals wasted movements that degrade the efficiency and quality of work. To evaluate comprehensive work flows modeled by combining EST and NST, work-analysis experiments using our instrumented setup were conducted. Results indicate that all the PSS definitely changes on the basis of PST under various work conditions, and work analysis using EST and NST easily reveals work characteristics and untrained tasks related to wasted movements.     

图的点可区别边染色算法研究

针对一般图设计了一种新型的点可区别边染色算法。该算法把概率思想和图染色相结合, 根据点可区别边染色的约束规则确立目标函数, 利用交换规则逐步寻优, 当目标函数的值满足要求时染色成功。给出详细算法步骤并进行了测试和分析, 实验结果表明该算法可以求出满足猜想的点可区别边色数。     

聚合物材料脆韧转变判据及影响因素分析

综述了聚合物共混增韧机理包括弹性体增韧、刚性粒子增韧、弹性体与刚性粒子协同增韧等研究进展；着重介绍了临界基体层厚度、损伤竞争准数、分子链参数、临界界面黏结条件、临界特征长度等几种源于单一粒子填充的脆韧转变判据，并分析其在复合粒子填充改性聚合物中的适用性。此外，还结合增韧机理和脆韧转变判据讨论了基体性能、分散相状态及相间界面黏结强度等因素对复合体系韧性的影响，提出寻找合适的复合分散相、适当调整复合粒子的结构比例、改善相间界面黏结以及设计最佳断裂路径仍将是今后努力的方向。     

随机非线性和部分转移概率未知时马尔科夫系统的H1控制

研究上述系统时: 1) 利用了非线性的概率分布信息; 2) 利用了转移概率中已知部分和未知部分的关系. 利用李雅普诺夫泛函方法和线性矩阵不等式方法, 本文得到了使得系统随机稳定的充分条件并得到了相应的反馈控制增益. 文中最后给出的例子表明了所建立模型和分析方法的有效性.     

印刷哈萨克斯拉夫粘连字符的切分方法

哈萨克斯拉夫图像文本经过行切分和列切分后,存在水平方向接触和垂直方向重叠的粘连字符。为提高字符识别率,依据字符连通域的最小外接矩形切分开垂直方向重叠的粘连字符图像块;利用判决条件:字符宽度概率密度分布图、字符图像块垂直投影的波峰数目和字符图像块垂直投影波峰的对称性,分离初始粘连字符图像块中正确的单个字符图像块和实际接触的粘连字符图像块;在允许的字符宽度范围内,寻找粘连字符图像垂直投影图的极小值点,以切分实际接触的粘连字符。实验结果表明,该方法泛化能力较好且识别率有明显提高。     

Correlation between the morphology and dynamic mechanical properties of ethylene vinyl acetate/linear low‐density polyethylene blends: Effects of the blend ratio and compatibilization

The effects of the blend composition and compatibilization on the morphology of linear low‐density polyethylene (LLDPE)/ethylene vinyl acetate (EVA) blends were studied. The blends showed dispersed/matrix and cocontinuous phase morphologies that depended on the composition. The blends had a cocontinuous morphology at an EVA concentration of 40–60%. The addition of the compatibilizer first decreased the domain size of the dispersed phase, which then leveled off. Two types of compatibilizers were added to the polymer/polymer interface: linear low‐density polyethylene‐g‐maleic anhydride and LLDPE‐g phenolic resin. Noolandi's theory was in agreement with the experimental data. The conformation of the compatibilizer at the blend interface could be predicted by the calculation of the area occupied by the compatibilizer molecule at the interface. The effects of the blend ratio and compatibilization on the dynamic mechanical properties of the blends were analyzed from ?60°C to +35°C. The experiments were performed over a series of frequencies. The area under the curve of the loss modulus versus the temperature was higher than the values obtained by group contribution analysis. The loss tangent curve showed a peak corresponding to the glass transition of EVA, indicating the incompatibility of the blend system. The damping characteristics of the blends increased with increasing EVA content because of the decrease in the crystalline volume of the system. Attempts were made to correlate the observed viscoelastic properties of the blends with the morphology. Various composite models were used to model the dynamic mechanical data. Compatibilization increased the storage modulus of the system because of the fine dispersion of EVA domains in the LLDPE matrix, which provided increased interfacial interaction. Better compatibilization was effected at a 0.5–1% loading of the compatibilizer. This was in full agreement with the dynamic mechanical spectroscopy data. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4526–4538, 2006