大庆油田水平井分流压裂技术

水平井分流压裂的技术原理是将水平井的水平段分成若干个单元，在每个单元的最佳部位进行射孔，每段的射孔数由孔径、单元数、设计施工排量等参数决定，射孔方案为压裂方案的有机组成部分。大庆油田已有5口水平井实施分流压裂，根据油层厚度分为两类：裂缝限制在油层内和裂缝穿透隔层贯穿多个薄油层。通过肇57-平35井和肇57-平33井进行的分流压裂贯穿多个油层现场试验，介绍了大庆油田水平井分流压裂的设计方法、压裂液体系、现场施工控制方法和效果分析方法。微地震裂缝监测结果表明，在最大施工排量7．5m^3／mim条件下，一次施工形成3～4条裂缝，加砂量最大达到75m^3（陶粒），平均砂比达到35％以上。水平井采用分流压裂技术施工后，初期产能可达到相邻直井压裂后产能的2．0倍以上。如何检测裂缝是否穿透了隔层并贯穿多个油层，是指导水平井分流压裂技术的选井选层，提高压裂效果的关键技术。图8表2参2。     

过渡金属对Au-Pd/TiO_2-Al_2O_3催化剂加氢脱硫性能的影响

研究了掺杂过渡金属Ru,Ni,Co对Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫活性的影响,并采用X射线衍射、电感耦合等离子发射光谱、程序升温还原和程序升温脱附等方法对TiO2-Al2O3复合载体、Au-Pd/TiO2-Al2O3和Au-Pd-TM/TiO2-Al2O3(TM表示过渡金属)催化剂进行了表征。实验结果表明,掺杂过渡金属未改变Au-Pd/TiO2-Al2O3催化剂的结构;掺杂Ru或Ni增强了Au-Pd/TiO2-Al2O3催化剂的活性组分与TiO2-Al2O3复合载体的相互作用,降低了反应活化能,提高了催化剂活性组分的分散度和活性比表面积,改善了Au-Pd/TiO2-Al2O催化剂的吸附性能,从而提高了Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫的活性;而掺杂Co的效果则与之相反。     

Characterization of Tomato Pulp Stickiness during Spray Drying using a Contact Probe Method

A contact probe test was developed to characterize the surface stickiness of a tomato pulp droplet at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to seven different moisture levels. The instantaneous tensile force curve was recorded during the probe withdrawal from which the maximum tensile force and other useful information were obtained and cross-examined against images of bonding, debonding, and failure of the material. Generally, at higher moisture contents tomato pulp exhibited cohesive failure followed by semi-adhesive failure, but when moisture content decreased to a certain level, a peak tensile pressure was observed and the failure was adhesive. In addition, higher temperatures shifted the points of adhesive failure toward lower moisture content.     

N.m.r. study of the ferroelectric phase transition in a 7030mol% copolymer of vinylidene fluoride (VF2) and trifluoroethylene (TrFE)

Nuclear magnetic resonance (n.m.r.) studies of ¹⁹F nuclei in a $\text{70}\text{30}\text{mol}\text{\%}$ random copolymer of vinylidene fluoride and trifluoroethylene were performed at 9.14 MHz and 20.0 MHz. The free induction decays (FIDs) were analysed in terms of two T₂ components attributed to the amorphous and crystalline portions of the polymer. The changes in crystallinity as well as the effects of the ferroelectric transition were observed during cycles of heating and cooling between 20°C and 140°C. The crystalline component of the FID lengthens by a factor of 2 at 100°C on heating and decreases by this factor at 60°C on cooling, thus exhibiting the thermal hysteresis of this ferroelectric transition. The spin-lattice relaxation was also investigated. From measurements at 9.14 MHz the observed longitudinal relaxation time T₁ appears to be dominated by the dynamics of the amorphous phase and exhibits no anomaly through the phase transition. However, from measurements at 20 MHz, well defined minima of T₁ were observed, which are associated with the ferroelectric transition (especially after repeated annealing of the samples). Results are discussed in terms of the crystalline phase structure, which appears dynamically disordered above the ferroelectric phase transition. An analogy is considered with the plastic phase transitions encountered in molecular crystals.     

Dynamics of hydrated iron(II) cations in nafion polymer membranes

Mössbauer studies of Fe²⁺ in water-soaked nafion polymer membranes in the temperature range between 90 K and 250 K have been performed. Above a critical temperature (～ 180 K) the spectra exhibit both elastic narrow absorption lines and quasielastic broad lines. These spectra are typical of bounded diffusion phenomena observed by Mössbauer spectroscopy in macromolecular systems like haemoglobin, myoglobin and ferritin. Similar spectral shapes have been observed by quasielastic neutron scattering from water in nafion membranes. Within 50 K above the critical temperature the total Mössbauer absorption area decreases by an order of magnitude whereas the narrow absorption line decreases by two orders of magnitude. The results are interpreted in terms of bounded diffusive motion of the iron. Using a model based on overdamped harmonically bound Brownian motion, the essential parameters of the iron motion can be derived as a function of temperature. The iron motion most probably reflects the motion of a large Fe²⁺ complex, e.g. Fe(H₂O)²⁺₆, which is attached to the polymer side chains via the sulphonic group.     

Electrical Resistance Measurement of Glass Transition and Crystallization Characteristics of Zr—Al—Cu—Ni Metallic Glasses

In this paper,glass transition and thermal stability of the Zr-Al-Cu-Ni metallic glasses were investigated by using electrical resistance measurement(ERM),DSC and X-ray diffraction techniques.The experimental results show that the ERM is capable of detecting the glass transition of the amorphous alloys and can help to distinguish the crystallization products of the Zr-Al-Cu-Ni metallic glasses owing to the difference of the electrical resistivity between the precipitation phases.     

堤身的数据采集及断面设计的几点建议

针对堤防设计的基础资料采集和设计优化，提出了一些合理性建议。     

蜂窝梁在大跨度走廊设计中的应用

介绍仪征化纤股份有限公司大跨度走廊中蜂窝梁的设计。     

Experimental evaluation of fishway modifications on the passage behaviour of adult Chinook salmon and steelhead at Lower Granite Dam,Snake River,USA

Previous studies of Pacific salmonid passage over Snake River dams indicated slowed passage at transition pools, the transition area between the fishway entrance and the fish ladder. In 2001 and 2002, we conducted an experiment to determine if modified weirs affected adult salmon and steelhead passage times and route selection through the Lower Granite Dam transition pool. Fish attraction flows through the lower ladder weirs were experimentally increased using removable panels. During the experiment we monitored radio‐tagged adult Chinook salmon and steelhead to determine passage routes and times through the transition pool. The weir treatment increased the number of spring–summer Chinook salmon passing straight through the transition pool compared to those exiting the transition pool to the collection channel or tailrace. Mean passage times through the transition pool differed among routes and were significantly lower during treatment periods for the exit‐to‐collection channel route in spring‐summer Chinook salmon, but not for other routes. Passage times among routes differed in steelhead, but there was no evidence of treatment effects on route use or passage time. Fall Chinook exhibited similar trends in route use and passage time to spring–summer Chinook, but differences were not significant, perhaps because of relatively small sample size. Total dam passage times did not differ by treatment or route for any run. Fish depth during passage of the transition pool suggested that most fish passed through submerged orifices and supported the hypothesis that increased water velocity through these orifices caused the increase in straight‐through passage in spring–summer Chinook. Collectively, the results suggested the weir modifications provided improvement to passage through the transition pool for spring–summer Chinook and no evidence of negative effects on other runs. The results from this study were used to develop new design criteria and modifications of the Lower Granite Dam fishway. Copyright © 2006 John Wiley & Sons, Ltd.