三峡水库安坪库岸段斜坡破坏机制及稳定性评价

基于斜坡的工程地质测绘和实验室分析,总结了研究地段区域滑坡规律,引入粘弹性基础板的弯曲破坏原理,对该地段斜坡破坏机制进行分析。从岩体本身的质量和岩体在地球内外营力作用下所表现的自稳性两方面考虑,采用两级模糊综合评判理论对测区进行斜坡稳定性工程地质单元划分,并利用刚体平衡理论验证模糊评判结果。     

东津水电站引水隧洞进口不良地质段施工

东津水电站引水隧洞进口段工程地质条件恶劣，施工干扰大，渡汛工期紧。采用喷锚支护洞脸边坡，洞口明挖３ｍ浇筑钢筋混凝土明拱和Ｌ形护坡墙；洞身段采用新奥法施工，先打通上导洞；进口４０ｍ分段开挖，分段衬砌；进水塔压板混凝土模板采用门字框架钢支撑；排除了施工干扰，防止了洞口滑塌，进口段塌方的恶性事故发生，保证了引水隧洞工程的顺利施工。     

ψ(3770)精细扫描数据积分亮度的测量

工作在北京正负电子对撞机(BEPC)上的北京谱议(BES),于2003年12月在质心系能量从3.660到3.897 GeV区间内67个能量点上收集了数据,我们测量了此67个能量点数据样本的积分亮度.数据样本对应的总的积分亮度为(5550.96±13.56±108.24)nb-1.     

具有厚大断面的大型球墨铸铁铸件的生产

首先通过电炉—LF精炼炉—VD精炼炉—包内球化的工艺路线获得了足够的优质铁液,然后通过选取合适的分型面、设置合理的浇注系统、设计专用的冷铁、安放足够大的保温冒口和上表面加大加工余量来去除夹渣等措施,成功生产了具有厚大断面的大型球墨铸铁铸件。     

Accurate measurement of capture cross sections in deep level transient spectroscopy: Application to EL2 in GaAs

A rigorous formulation of capacitance changes during trap filling processes is presented and used to accurately determine the electron capture cross section of EL2 in GaAs at a particular temperature, 377K, in this case. The value, σ_n (377K) = 2.7 × 10⁻¹⁶ cm², is compared with that predicted from the emission dependence.     

Vorticity field structure associated with the 3D Tollmien-Schlichting waves

Details of the vorticity field structure associated with the 3D Tollmien-Schlichting waves have been examined based upon the recent numerical studies of the subject. First, a single obliquet-s wave has been found to have the velocity component parallel to the wave front playing an overall dominant role, in particular, to create the longitudinal vorticity. The so-called Benney-Lin longitudinal vortices are then demonstrated to be, in fact, a minor consequence compared with the localized longitudinal vorticity field and its periodic pumping. Finally, the formation of the longitudinal vorticity field in the fundamental- and subharmonic-mode interactions is explained. The research reported in this paper has been supported in part by Bundesministerium für Forschung und Technologie and by Deutsche Forschungsgemeinschaft. The major part of the paper has been presented at the Third Asian Congress of Fluid Mechanics, 1–5 September 1986, in Tokyo, as a General Lecture by the senior author, FRH.     

大比例尺地质剖面图第一条标高基线绘制方法的探讨

介绍了大比例尺地质剖面图第一条标高基线的几种绘制方法，总结了绘制经验。     

等径侧向挤压应变分析

对等径侧向挤压变形的应变进行了深入的分析，应用平面纯剪切变形应变分析的结果，得到了等径侧向挤压变形真应变和等效真应变的计算公式，分析了循环等径Ｓ型侧向挤压真空应变和等效真应变的变化规律。     

Thick bone section preparation using a silicon-rubber-based sealant

A method has been developed, using a silicon-rubber-based sealant, which allows 2–3-mm-thick specimens to be maintained in a protected fluid environment for a number of months, without risk of dehydration. Following this, the specimen can be retrieved, stained, embedded and sectioned further. For example, 2-mm-thick sections of fixed unstained bone are easily examined by means of epi-illuminated polarized light and fluorescence microscopies using either conventional or confocal optics. The method could easily be extended to other tissues, for example brain tissue.     

用EGS4分析9MeV行波直线加速器屏蔽系统

采用了国际上广泛使用的ＭｏｎｔｅＣａｒｌｏ模拟计算程序ＥＧＳ４对海关集装箱检测系统用加速器屏蔽系统进行了辐射模拟分析，与实际测试数据进行分析、比较，解释了特殊剂量分布的原因，提出了系统改进的参考方案。