声诱饵仿真试验系统

介绍了声诱饵仿真试验系统的组成、工作原理、对接装置结构等,建立了对接装置声耦合状态下的数学模型,对近场声压分布进行了仿真计算,得出了匹配材料厚度、发射和接收换能器的选取原则。     

The Role of Test Protocols in Automated Test Generation for Embedded-Core-Based System ICs

Modular testing is an attractive approach to testing large system ICs, especially if they are built from pre-designed reusable embedded cores. This paper describes an automated modular test development approach. The basis of this approach is that a core or module test is dissected into a test protocol and a test pattern list. A test protocol describes in detail how to apply one test pattern to the core, while abstracting from the specific test pattern stimulus and response values. Subsequent automation tasks, such as the expansion from core-level tests to system-chip-level tests and test scheduling, all work on test protocols, thereby greatly reducing the amount of compute time and data involved. Finally, an SOC-level test is assembled from the expanded and scheduled test protocols and the (so far untouched) test patterns. This paper describes and formalizes the notion of test protocols and the algorithms for test protocol expansion and scheduling. A running example is featured throughout the paper. We also elaborate on the industrial usage of the concepts described.     

游梁式抽油机二次平衡分析

为解决游梁式抽油机能耗大、效率低的问题，设计了二次平衡装置。这种装置通过是挂在抽油机后端的平衡重的平衡作用，降低一次平衡曲柄轴净扭矩的两个峰值，达到减少能耗提高效率的目的。对抽油机的二次平衡作了较详尽的理论分析，给出了实行二次平衡后曲柄轴净扭矩的计算公式和安装二次平衡装置前后曲柄轴净扭矩曲线图。在大庆油田两口井上进行的现场试验结果表明，安装二次平衡装置后，两口井年节约电费分别为0.25万元和1．17万元，经济效益明显。     

COMPRESSION FATIGUE CRACK GROWTH BEHAVIOUR OF AN ALUMINIUM ALLOY: EFFECT OF OVERLOADING

Abstract— The behaviour of fatigue cracks in an Al-alloy under cyclic compression, either with or without overloads, was studied. For constant-amplitude compressive cycling, a non-catastrophic (saturation) character of the fatigue crack behaviour was confirmed, with the final depth of a crack depending on the applied load level. Single (tensile or compressive) intermittent overloads were shown to re-activate a previously arrested crack while reversed (tensile—compressive or compressive—tensile) ones were also shown to maintain continual fatigue crack extension under otherwise fully compressive cycling.     

一种实时心电图数据压缩算法

提出了一种实时心电图ＥＣＧ数据压缩算法。它是将自适应变门限算法与转折点算法相结合。自适应变门限算法是对ＡＺＴＥＣ算法的改进．它计算ＥＣＧ信号的几个统计参数来确定可变门限值。转折点算法是分析采样点的趋势并只存储每对连续的采样点中的一个。它保留信号的斜坡标志发生变化的峰点和谷点。本文算法兼有这两种算法的优点。这种算法在较高压缩比的情况下重建心电图信号失真较小．     

压缩式致冷设备的电子宽温域多功能控制

设计并研制了一种用于压缩式致冷设备的电子式定温域多功能控制装置。它除具有控温范围宽、精度高、控温参数易调等优点外，还实现了低成本的温度显示、半自动除霜控制、加电延时保护、过欠压保护等功能。全部采用无触点控制方式，有良好的性能／价格比。     

低频电脉冲采油工程设备的开发与应用

低频电脉冲采油技术是通过升压、整流、充电等电路将电能蓄积在电容器中,通过触发电路,使能量瞬时释放,在井内液体中产生震动波,作用于地层,改善地层的渗流状况,达到提高采收率的目的。Ⅰ型设备在双河油田应用11井次,成功率72%;Ⅱ型设备在古城油田应用10井次,成功率90%。主要是由于Ⅰ型设备关键部件在处理油井时要放在井下,受高温、高压的影响及井下空间的限制,设备稳定性差、寿命短、能量小、效果差;Ⅱ型设备解决了上述问题,从而提高了试验成功率。