多种采暖方式的特点及其选择

介绍了多种采暖方式．并对各种采暖的适用性、一次性投资、运行费用和对环境的影响作了对比，提出了选择的优先顺序，为房地产开发商和用户对于采暖方式的选择提供了参考。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。     

A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition

Waste combustion is an interesting alternative for waste management and energy recovery. Knowledge of the waste higher heating value (HHV) is important for judging it’s worth as fuel. This work introduces a new equation, based on thermochemical concepts, to calculate HHV from elemental composition. This equation is expressed in terms of mass percentages on a dry basis of carbon (%C), hydrogen (%H), oxygen (%O), nitrogen (%N), and sulfur (%S); the HHV is computed in MJ/kg. The equation is as follows: HHV=(1−(%H₂O/100))(−0.3708(%C)−1.1124(%H)+0.1391(%O)−0.3178(%N)−0.1391(%S)). The thermochemical concept on which this expression is based involves a wide applicability. This equation neglects the inorganic carbon, hence it is not very adequate when there is a significant concentration of it. The predictions from this approach were contrasted against those proceeding from equations currently used in combustion technology, and also against bomb calorimeter data. The new equation is clearly competitive with respect to other formulations, and it can be very helpful for presenting a waste HHV value based on different derivation suppositions.     

转子叶片在非均匀来流条件下的流体激振特性

该文通过研究得出非均匀来流对转子叶片流体激振的三个重要特征 :非均匀来流相对于转子叶片的非定常流中主频分量是产生叶片动应力的决定因素 ;非均匀来流的非均匀度 (相当于非定常流的波幅 )大小和叶片流体激振的动应力大小成正比 ;转子叶片流体的定常压力水平与叶片动应力的水平密切相关。图 4表 2     

红外加热节能技术的现状与发展前景

本文综述了国内外节能的现状与发展趋势,论述了远红外电加热领域的发展前景,强调了加强基础理论研究的重要性,介绍了我国红外加热应用的领域和国外新开发的红外产品。     

硫化钠在黑白钨加温精选中的应用研究

介绍了柿竹园黑白钨混合粗精矿加温精选中 ,添加硫化钠与水玻璃混合剂比单一添加水玻璃能更有效地使白钨矿与萤石等含钙矿物及脉石矿物分离。论述了硫化钠在加温精选中的作用效果并探讨了其作用机理     

孔板—均速管组合法测量汽—水两相流双参数

利用孔板与均速管组合在线测量汽—水两相流双参数，解决了稠油热采中同时测量蒸汽流量与干度的难题。其工作程序用Mcs-51单片机汇编语言编制而成，主程序由初始化、数据采集处理，热物理参数生成、汽—水两相流量、干度、质量流量、热量计算以及累计运算等模块组成。通过在现场进行标定；干度用化验CI^-法进行标定，流量用锅炉入口的涡轮流量计标定。经胜利和新疆两油田进行的大量试验可知，该仪表测量水蒸汽流量和干度其均方差皆小于7%，满足了工业应用要求。     

RF antenna analysis with the ICANT code

The ICANT code computes self-consistently the surface current distribution on a 3D antenna model radiating in a plasma or vacuum and has been used to analyze the coupling properties of various antenna models. In this work it is used to assess near-fields generated by different versions of the TCABR (Tokamak Chauffage Alfvén wave heating experiment in Brazil) antenna as well as coupling properties of the TEXTOR tokamak in Forshungszentrum Jülich. Two different strap models planned for the TCABR antenna are shown to be practically equivalent in terms of maximum electric field. Textor coupling calculations are close to experimental values.     

砂岩储集层微波加热产生微裂缝的机理及意义

微波加热无需介质传热,具有升温速度快、热惯性小、选择性加热、穿透力强、过程易于控制等优点,已被试验性地应用于石油开采中。但有关微波加热对储集层岩石微观结构影响的研究还很缺乏,限制了该项技术在油气开采领域的广泛应用。通过实验手段研究了微波加热前后砂岩岩样微观结构变化、微裂缝产生机理及特征。结果表明,砂岩在微波加热过程中容易产生微裂缝,且不同岩石的微波加热致裂机理不尽相同,主要包括:矿物失水收缩、颗粒粒间开裂和颗粒内部开裂,低渗透致密砂岩刚性颗粒的粒内开裂作用显著。微波加热产生的微裂缝具非定向特征,即使在应力的作用下有一部分裂缝会发生闭合,但仍有大量微裂缝可以起到增加渗透率的作用。井下微波加热的致裂作用有助于改善近井区域渗流能力,提高低渗透油气藏的开采效率。图4参15     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。