锥形阀压电薄膜泵的初步研究

提出一种适应高频工作状态的压电薄膜泵结构，实步分析了所采用的锥形阀的工作原理与作用，设计了试验泵结构，加工了样机，通过试验证明了锥形阀的有效性，为进一步的研究打下了基础。     

Drying of Prone to Twist Boards in a Pre-Twisted Position

A method to minimize twist has been investigated; i.e., drying the boards in a pre-twisted position. It has been found that Norway spruce boards can be deformed toward straightness by this method. The force exerted by a board on its holders during drying in a pre-twisted position has been measured. When the variation in torsional stiffness as a function of temperature and moisture content is accounted for, it is found that a creep deformation of the board occurs both during the drying phase and the cooling phase. In addition to mechano-sorptive creep, a deformation released by a change in temperature also seems to occur.     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

气门用4Cr9Si2钢调质工艺研究

采用正交试验 ,研究了 4Cr9Si2钢的淬火温度、回火温度与组织、硬度间的关系 ,得出了最佳的工艺参数 (10 10℃淬火 ,6 0 0℃回火 )。实际生产表明 ,采用此工艺后 ,断裂现象基本消除 ,气门的热处理质量有了明显提高。     

钻井泵阀箱密封面CO2堆焊试验研究及应用

介绍了用CO_2堆焊35CrMo钢钻井泵阀箱密封面磨损修复工作,通过试验表明,采用Φ1.2mm的H08Mn2Si焊丝,以短路过渡CO_2焊法施焊,可以获得致密、耐磨的堆焊金属层。该法已成功地用于生产,取得了良好的经济效益。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

国外柴油机用粉末冶金气门阀座概述

概述了国外粉末冶金气门阀座的制造工艺特点,简要介绍了国外柴油机用粉末冶金气门阀座材料的性能水平。     

Contact interaction of double titanium and chromium diboride with Fe-Cr alloys

The kinetics of wetting double titanium and chromium diboride by iron-based alloys with different chromium content is studied. It is shown that contact angles are formed in such systems over the range 0–10°. The energy parameters of wetting are calculated. It is established that chromium as a surface-active element promotes Fe-Cr alloy spreading on the diboride surface. The microstructure of the interaction area is studied. It is shown that terminal solid solutions and eutectics are formed in the TiCrB₂-(Fe-Cr) system. The optimum compositions of the metallic binder are determined for TiCrB₂-based composite materials. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 109–115, 2007     

WZ—C系列密封阀结构分析与改进

对W Z-C系列无料钟高炉炉顶布料设备上、下密封阀在涟钢3#高炉的使用情况进行了论述,分析了故障产生的机理,对密封阀的结构进行了改造并取得了相当可观的经济效益。     

钻削中产生迷切现象的机理研究

随着科学技术的发展．对孔加工精度的要求越来越高．钻削过程中的速切现象对孔加工的形状精度、位置精度有很大的影响．本文用试验、观察、解析的方法分析了钻头迷切现象与各种因素的关系，对提高孔加工精度有了新的揭示．