Throughput-based fair bandwidth allocation in OBS networks

Fair bandwidth allocation (FBA) has been studied in optical burst switching (OBS) networks, with the main idea being to map the max-min fairness in traditional IP networks to the fair-loss probability in OBS networks. This approach has proven to be fair in terms of the bandwidth allocation for differential connections, but the use of the ErlangB formula to calculate the theoretical loss probability has made this approach applicable only to Poisson flows. Furthermore, it is necessary to have a reasonable fairness measure to evaluate FBA models. This article proposes an approach involving throughput-based-FBA, called TFBA, and recommends a new fairness measure that is based on the ratio of the actual throughput to the allocated bandwidth. An analytical model for the performance of the output link with TFBA is also proposed.     

AHP-模糊综合评价法在标准实施效果评价中的应用

开展标准实施效果评价能够对标准的实施状况、标准的科学性有一个客观和科学的认识,对标准的制修订工作有重要的指导意义。本文以石油工业标准为研究对象,从标准实施状况、标准实施监督、标准经济效益和标准社会效益4个方面构建了评价体系,综合运用层次分析法(AHP)和模糊综合评价法对标准实施效果进行评价。评价结果表明,该方法可以实现定性分析和定量分析的有效结合,使评价结果更符合实际情况,为标准实施效果评价提供了一种新的思路。     

Optimization of parameters in solar thermal collector provided with impinging air jets based upon preference selection index method

The present study examines the effect of flow and geometric parameters on the performance of solar thermal collector provided with impinging air jets. The investigation has been carried out in terms of performance defining criterions which are pertinent to determine the optimal design of impinging jet solar thermal collector. The experimental investigation indicated that the impinging air jets enhances the thermal performance but at the same time the friction power penalty also increases which depress the overall performance of the system. In view of this the preference selection index (PSI) approach based methodology has been applied using various performance criterions in order to determine the optimal design of the parameters which deliver maximum thermal performance with minimal increase in friction factor inside the collector duct. The optimum configuration of the parameters obtained as a result of proposed method is: streamwise pitch ratio of 0.435; spanwise pitch ratio of 0.869; jet diameter ratio of 0.065 and flow Reynolds number of 16,000.     

Comparison of steam-alkali-chemical and microwave-alkali pretreatment for enhancing the enzymatic saccharification of oil palm trunk

This paper demonstrates two different pretreatment protocols for oil palm trunks (OPT); steam-alkali-chemical (SAC) and microwave-alkali (Mw-A) method. The composition, morphology, structure and crystallinity of OPT before and after pretreatment were analyzed. The effectiveness of the pretreated methods was investigated by performing enzymatic saccharification on the OPT. The physiochemical factors namely: enzyme ratio (cellulase to β-glucosidase), pH, temperature and substrate loading (w/v) on enzymatic saccharification were also investigated. The pre-determined optimal conditions were then used for further enzymatic hydrolysis of raw and pretreated OPT substrates. The results revealed a huge degree of reduction in lignin, up to 89% for SAC treated OPT and at least 15% for Mw-A treated OPT sample as compared to untreated ones. High glucose accumulation (79.4%) was obtained after 72 h saccharification for both pretreated OPT samples.     

Coastal trapped waves in the southern Caspian Sea

Previous studies reported coastal trapped waves (CTWs) in the Caspian Sea (CS). This study deals with the generation mechanisms, the temporal and spatial variability of CTWs in this area, and their transformations during propagation from the origin to the destination using recent measurements and high-resolution numerical simulations. CTWs are observed at all stations with periods of 2–6 days after northerly storms. The Absheron Peninsula, old Sefidrud delta, and Nur coasts were identified as the CTWs prone regions. The generation of CTWs in these locations was confirmed using numerical experiments. The propagation away from the generating location of CTWs was analyzed using a representative real wind storm. In the west part of the CS, the generation mechanism of CTWs is mainly similar to the barotropic Kelvin waves; in contrast, it is similar to the continental shelf waves in the southern shelves. The results can be used to study the contribution of generated CTWs to the transport of sediment and biological materials in all large lakes.     

Structure of turbulent rich hydrogen‐air premixed flames

In the present article, series of experiments were conducted to study the structure characteristics of premixed flames in turbulent rich hydrogen‐air mixtures within a constant‐volume turbulent combustion system, 7 equivalence ratios (1.2, 1.4, 1.6, 1.8, 2.0, 2.2, and 2.5), and 5 turbulent intensity (0, 0.494, 0.742, 1.080, and 1.309 m/s) were studied. With the increase of turbulent intensity, the cellularity degree was obviously enhanced for turbulence promoted the formation and the development of initial cracks by wrinkling flame‐front; furthermore, the enhanced hydrodynamic instability was also one important reason. Turbulence would change the linear growth of critical radius to equivalence ratio into nonlinear, but the variation extents had limitation. The wrinkling index of flame‐front would rise as flame expanded, and the wrinkling index on flames with similar size would be increased with the increase of turbulence once the turbulent intensity was sufficiently high. From the variations of the root mean square of related oscillation on flame‐front, it could be found that the partial amount of oscillation induced by sole turbulence was declined as flame expanded for the breakup of large eddies.     

双馈电机力能指标优化控制策略仿真研究

在双馈调速过程中,当转子侧变频电源的压频比与负载匹配不相适宜时,会使双馈电动机运行在力能指标相对较低状态,为探究恒转矩负载条件下转子侧变频电源的压频比对双馈电动机功率因数和效率的影响并使双馈电机力能指标得以优化,提出一种双馈电机力能指标优化控制策略.通过理论推导以及对不同频率、不同负载条件下,双馈电机转子侧电压、电流与定子侧电流、力能指标间的关系进行研究,得出控制转子电压可对定子侧功率因数进行控制的一般规律,并得出使定子侧功率因数为1时的压频比为转子侧最佳压频比,此时双馈电机的力能指标相对最优,在此基础上提出双馈电机力能指标优化控制策略,仿真结果表明力能指标优化控制策略能使双馈电机在不同频率、不同负载条件下始终运行在力能指标最优状态.     

A novel recursive approach for real-time transient stability assessment based on corrected kinetic energy

Real-time assessment of transient stability is one of the main issues of power system operators in online applications. This paper proposes a novel recursive approach based on corrected kinetic energy which has the capability of real-time assessment and real time computation of transient stability margin in the power system. This approach considers all details of power system by using network preserving model to simulate transient stability. This paper uses a hybrid method based on the new concept of equal area criterion to estimate initial value of critical point of the system and corrected Kinetic Energy Function to estimate high precision value of the critical point. Also, this paper proposes a recursive method which uses large change sensitively (LCS) analysis to correct initial condition point of the system when the topology of system is changed by a disturbance. In order to validate the proposed method, comprehensive case studies have been conducted on IEEE39-bus test system. Comprehensiveness in considering the details, simplicity in implementation and low computational cost are the outstanding features of the proposed approach. Also, simulation results approve that the proposed approach can be used in real-time application without loss of any detail in the transient stability assessment.     

Schedule Model for Project Portfolio Based on Design Structure Matrix

To improve the enterprise resource utilization and shorten the cycle of the whole project portfolio,a scheduling model based on Design Structure Matrix ( DSM) is built. By setting the project activity weight index system and calculating the activity weight for the project portfolio,the constraint relationship between project portfolio information and resource utilization,as the two dimensions of the DSM,are fully reflected in the schedule model to determine the order of these activities of project portfolio. A project portfolio example is given to illustrate the applicability and effectiveness of the schedule model.     

The role of price as a product attribute in the organic food context: An exploration based on actual purchase data

High prices are often quoted as an obstacle to consumer purchase of organic food products. This article investigates the market performance of organic food products at different price levels and whether high price is necessarily a disadvantage for organic food products, especially with regard to generating repeat purchase. Based on analyses of panel purchase data from 2011 in Denmark, the study explores the effects of production method (organic vs. conventional) and price on consumers’ repeat purchase and cross-purchase across four product categories: red meat, chicken, milk and hard cheese. Results show that a high price is a disadvantage for generating repeat purchase of organic food products. Although organic products enjoy higher repeat purchase than conventional products overall, a high price generates less repeat purchase of organic products than a low or a medium price in all product categories; whereas in the case of conventional food products the situation is the reverse. At the same time, the cross-purchase analysis reveals that consumers who buy organic products from the high price tier are less likely to switch to other price tiers than consumers who buy low or medium price organic products (i.e. there is a spillover of high price organic food purchases to other product categories). Implications for pricing strategies for organic food products are discussed.